2) Menu Project > Add Track > Audio > Add Track Configuration > Mono > OK. 3) Menu Transport > Project synchronization Setup > Timecode Source > ASIO Audio Device. 4) Menu Project > Project Setup: Frame Rate = 25 fps / Display Format = Timecode / Sample Rate = 44,1 KHz / Record Format = 16 bits / Record File Type = Wave file / Stereo Pan Law = Equal Power. 5) Menu Transport > Metronome Setup > Metronome Options: Metronome in Record (ticked) / Pre-count Options: Pre-counts Bars (ticked) / Audio Click: Activate Audio Clicks (ticked) / Beeps (ticked). 6) About Transport de-clicking TEMPO item for enter Tempo marks and Time Signature (click 2 times to enter the values). 7) Activate Record button in the track audio > Activate Record button in Transport > activate Play button in Transport for start record sync. 8) On the Audio MOTU Console > Master Clock Source : SMPTE. 9) On the MOTU SMPTE Console > (Reader): SMPTE Source= SMPTE / Click/Address= SMPTE/SMPTE > Frame rates = 25fps. (Generator): Destination = SMPTE. 10) Para a correta conexão dos cabos, ver secção da página 31 do Manual MOTU. Ver também o item “Resolving CUBASE ou NUENDO to Time Code” na página 115 do Manual MOTU.
(Suny Series, Fernand Braudel Center Studies in Historical Social Science) Dale W. Tomich-New Frontiers of Slavery-State University of New York Press (2016)