Salient Features
“No Tube - No Filling" system.
Suitable for filling, sealing coding of Aluminum tube as well as plastic LAMI tubes by changing over the sealing device.
Electrical jacketed S. S. Hopper with thermostatic control to keep the material hot, while filling for a smooth flow of material.
Machine is provided with stirring device, so that no active ingredients in the material can stick to the inner wall of hopper.
All contact parts made of S. S. 16 material.
Relay electrical control system with operating panel with start, stop, and inch.
Variable A.C. drive motor for the speed adjustment.
Salient Features
“No Tube - No Filling" system.
Suitable for filling, sealing coding of Aluminum tube as well as plastic LAMI tubes by changing over the sealing device.
Electrical jacketed S. S. Hopper with thermostatic control to keep the material hot, while filling for a smooth flow of material.
Machine is provided with stirring device, so that no active ingredients in the material can stick to the inner wall of hopper.
All contact parts made of S. S. 16 material.
Relay electrical control system with operating panel with start, stop, and inch.
Variable A.C. drive motor for the speed adjustment.
Salient Features
“No Tube - No Filling" system.
Suitable for filling, sealing coding of Aluminum tube as well as plastic LAMI tubes by changing over the sealing device.
Electrical jacketed S. S. Hopper with thermostatic control to keep the material hot, while filling for a smooth flow of material.
Machine is provided with stirring device, so that no active ingredients in the material can stick to the inner wall of hopper.
All contact parts made of S. S. 16 material.
Relay electrical control system with operating panel with start, stop, and inch.
Variable A.C. drive motor for the speed adjustment.
oe
utomati
EOFully Automatic Tube Filling Machine is suitable for filing and sealing of tubes. Our machine is suitable for LAMI and Aluminium tubs.
This is combi machine where you can do LAMI and Aluminium tubes by switch of one button. Machine is widely uses in pharmaceutical,
cosmetics, chemical, agriculture & food industry.
Suitable for filing aluminium as well as plastic tubes.
Compact model hence less space required.
The pump unit has a vertical dosing system, which aids in easy suction.
Bottom-up filling coupled with shut-off nozzle ensures accurate & clean fill without air entrapment.
Tool-less adjust ments coupled with faster reproduction of settings (aided by position indicators and tri-clover fittings)
make changeover quite effortless.
Product level sensor, centralised lubrication and a host of safety features like detection of reverse tube, jammed tube,
air pressure drop etc. are part of basic machine.
Saddle fold.
Multi-colour filling,
Designer seal in plastic tubes.
Gas flushing before & after filing,
Filling Volume
Production Output
Hoper Volume
Filling Accuracy
Tube Diameter
Tube Length
Power Supply (Motor)
Power Supply (Heating)
Electrical Characteristics
Operating Air Pressure
Overall Dimension
Sl to 250m!
30 to 60 tubes / Minute
40 Itres
21%
10mm to Somm
210mm max.
15HP.
ane.
440 volts, 3 phase, 50 hertz
0.507 MPa
190mm (L) x 850mm (W) x 1900mm (H)
Note: Electrical characteristics can be adjusted as per customer's domestic power requirements.
* Rights of technical improvements & modification reserved.
= Illustration & dimensions are shown for information purpose only,
Adinath”
International
4, Sanskar Industrial Estate, Beside Kallash Estate,
Near S.P. Ring Road, Odhav, Anmedabad, Gujarat, INDIA-382415,
Tol : + 91 79 6542 2528 Fax: +91 79 2277 3764
E-mail: info@adinath.co.in_ Website : www.adinath co.in