Professional Documents
Culture Documents
Assignment 4 PDF
Assignment 4 PDF
1. In the region just downstream of a sluice gate, the water may develop a reverse
flow region as indicated in the following figure. If the water depth at section (1) is
5 ft, find the average flow velocity there.
3. Determine the magnitude of the horizontal component of the anchoring force per
unit width required to hold in place the sluice gate shown in the following figure.
Assume that the flow downstream is uniform. The pressure distributions upstream
and downstream all equal to hydrostatic pressure (hint: these pressure forces has
to be accounted as external forces on the control volume).
pressure distribution is hydrostatic, and at section (2) the pressure equals the
atmospheric pressure (hereby considered as zero).
5. Five liters per second of water enter the rotor shown in the following figure along
the axis of rotation. The cross-sectional area of each of the three nozzle exits
normal to the relative velocity is 18 mm2. How large is the resisting toque
required to hold the rotor stationary (if θ = 0 0 )?