fo
PT. UNION METAL
COTTE Tams) im 1016 TeM el CALLE
CMe URE)
eet)
Ce Ree
Phone # (62-21) 893.5234, Fax # (62-21) 893.4949
‘e-mail: unionjkt@unionmetal.co id
SN
eee een
ee eee)
oe ee ea
SURABAYA
eo ata re}
Se eal
Ete ae
eee es Ta a
UNION SAMPOERNAWc l®
2
UNION
UNION BATTUnion Floor Deck 11@, adalah pelat baja
structural bergelombang dengan mutu tegangan
tarik tinggi dan dilapisi Galbani yang berfungsi
ganda, yaitu sebagai bekisting tetap dan
Penulangan positif satu arah, pada lantal beton
bangunan bertingkat.
Union Floor Deck 11@, adalah Pengembangan
dar! Union Floor Deck® yang terlebih dahulu ada
yaltu pada bagian rusuk gelombang ates terdapat
tonjolan "Emboss” setinggi 2 mm dan perbaikan
pada sistem sambungan samping (side lap)
Emboss/tonjolan pada rusuk, memperbesar
kapasitas geser lekat (shear bond) lebih dari 2
kali lipat sehingga menjadikan pelat komposit,
lebih monolit dan lebih mampu menerima beben
yang lebih besar.
Sistem sambungan samping (side lap) pada
Union Floor Deck If@, mempunyai beberapa
kelebihan antara lain :
2. Sistem penguncian yang lebih baik pada saat
pelat komposit terbentuk.
b. Gaya geser yang terjadi lebih besar.
c. Lebih tahan terhadap bahaya kebakaran, karena
setiap rusuk tumpangan samping (side lap)
terbungkus beton penuh.
'SPESIFIKASI ::
eral ong ATA Ga 690
Informasi Produk
product information
Union Floor Deck I1®, is a corrugated structural
steel plate has a high tensile strength and is
galvanized. It has a dual function, i.e. as the
permanent for multi-storey building concrete slab,
Union Floor Deck 11@, is a further development
of the former Union Floor Deck®. The upper side
of its ribs is embossed by 2 mm and the side lap
joining system has been a modification of the
former system.
The Embossed ribs have increased the shear
bonding strength by more than twice so that the
composite siab becomes more monolithic and is
capable of withstanding heavier loads.
The side lap joining system at Union Floor
Deck 11@ has several advantageous such
2. Better locking system when the composite slab
be formed;
b. Greater withstanding against shearing force;
¢. More resistance against fire hazard because its
every side lap rib is covered with concrete
— ‘SPECIFICATION ::Perencanaan & Desain
Formwork Design
planning & design
Table 1
Max. Union Floor DECK I1® Formwork Span
Union Floor Deck 11@ | Propping | 100 mm slab 120 mm slab, 140 mm slab
ar cam) Rows [Single | Continuous | Single | Continuous | Single | Continuous
(mm) | (mm) | (mm) | (mm) | (mm) | (mm)
0.75 ° zioo | 2450 | 1950 | 245 aso | 2350
1 3250 | 4000 | 3700 4100 | 4450
2 3250 | 4000 | 3700 4100 | 5600
Composite Slab Design
Table 2:
a0 coe Live Load Shrinkage
Union Floor Deck 11 Slab Reinforcement
150 kPa 200 KPa 300 kPa 400 kPa
Max, Single Spens,.com 3250 315 2350 2850 nee
Max. End Spans, mm 5686 3600 3800 336 Conaitions
Strength Reint. io.at 200(M9)] 019.98 200(¢8)|,012 at 2000me)]ox2 at 2000M8)| MB eng,
Max. Interior Spans, mn 46 4000 4000 4000 Conditions
Strength Reint. y 012 at 200(M8)] 012 at 200(Ms)Jore at 200(m10))_ ME
120 mm tivellead Shrinkage
Union Floor Deck 11 Slab Reinforcement
150 kPa 200 kPa 300 kPa 400 kPa
Max. Single Spans,.mm 3700 3600 3400 an
Max. End Spans, mm a8 4360 a8 Endlons
Strength Reine. 12 a8 200(Me)| 012 a 2 82 08 20000) Moet
Max. Interior Spans, min 4300 400 480 400 Conditions
Strength Reint. 912 at 200(m8)]612 at 200(M8) [016 at 200(mi0Jor6 at 200(m10)]
140 mm ivartsa Shrinkege
Union Floor Deck 11@ Slab Reinforcement
200 kPa 300 kPa 400 kPa
Max. Single Spans,.mm. mist ane 3650] anternar
iMax. End Spans, mm a8 a8 i385 Gandltons
Strength Reint 12 2t 200(m8)| 912 at 200me)lox6 at 200(¢10)] BS arma)
ax. Interior Spang, min 5600 00 $500 Gandions
Strength Reint. 1912 at 200(Ms) o(m10)Jo16 at 200(Mr0Jo16 at 200(m20)]Slab Reinforcement Slab Section
ee a an & Konstruksi
installation & construction
it Pemasangan Pada Rangka Konstruksi Baja a
Installation On Steel Frame Construction
: Pemasangan Pada Rangka Konstruksi Beton I
Installation On Concrete Frame ConstructorGambar Pemasangan
installation picture
pen UFD II Sheet Packaging 2 3 Place Props (if required)
3-3: Trim UFD II Sheets & Place On Steel
1: Fix UFD II Sheets to Stee! Beams
Beams or Concrete Beams or Concrete Beams
J,
6 3: Place Reinforcement
7 3 Clean The Area