You are on page 1of 20
HORSEPOWER Gross: 728 kW 976 IIP @ 1000 rpm Net: 713 kW 956 HP @ 1800 spn ® OPERATING WEIGHT Backhoe: 200000-204120 kg 440,920-450,000 Ib PC2000-s BACKHOE _ PC¢2000.s LOADING SHOVEL be HYDRAULIC EXCAVATOR PC2000-. HYDRAULIC EXCAVATOR WALK-AROUND — ee ee eras ey Genuine Answers for Land and Environment Optimization Productivity and Economy © Fuel Efficient Machine Achieved by Total Power Management and Advanced Hydraulic System Fuel consumption at Economy mode 10% reduced (eompared with PC1800-6) + Hydraulic power loss reduced with advanced hydraulic system + On-demand fan speed and engine output control system + Equipped with electronically controlled variable speed fans © Powerful and Economical Engine Komatsu SAA12V140E-3 Engine with an Output of 713 kW (956 HP) Controlled by Etficient Power Management System + Auto deceleration and auto idling system + Two work modes; Power and Economy Ecology © EPA Tier 2 Emission Certitied Komatsu Engine ‘© New Technology Produces Remarkably Low Environmental Noise Dynamic noise 8 dB lower than PC1800-6 + Power module packaging and noise absorbing blades trap noise inside + 3-D hybrid fan minimizes air turbulence noise See pages 4, 5. Easy Repair and Maintenance Low R&M Cost Sustained by Simplified and Reliable System with Long Service lite © Simplified and Durable Structure © Single engine and PTO drive two Komatsu HPV3754375 pumps. « Simplified travel unit with single motor (each side) + Reinforced track components + Long life oil and filters + Extended life of rubber components achieved by lowering hydraulic oil temperature ‘© Power Module Makes Installation and Remaval of Components Easier, and Reduces Overhaul Hours and Cost © Service Friendly Design * Maintenance deck surrounding the power module + Drain ports accessible from the around level * Concentration of filters © Large fuel tank enables 24 hours continuous machine operation + Auto-greasing system including bucket pins with 200 liter 52.8 U.S.gal grease tank ‘© VHIMS Monitors the Machine Condition and Minimizes Machine Down Time See pages 6, 7, 8 and 9. PC¢2000.s HYDRAULIC EXCAVATOR HORSEPOWER Gross: 728 kW 976 HP @ 1800 rpm Not: 713 kW 055 HP @ 1800 rpm Operator Comfort OPERATING WEIGHT ‘© Newly Designed Mining Shovel Cab Provides Comfortable Operation Backhoo + Excellent operational visibility with extended front windshield and large twin wiper 200000-204120 kg 440,920 ~450,000 Ib Leading shovel 195000 kg 429,900 Ib + Extremely low noise and vibration Dynamic in-vab nvise reduced (0 the sare level as passenger vars ‘ Ruigged OPG top guard integrated into the cab + Easy-to-see and easy-to-use /-inch TFT-LCD large monitor + Comfortable air-suspension seat + Automatic air conditioner + Highly pressurized cab ‘© Bulkhead between Pump Room and Engine © Emergency Stop Devices © Interconnected Harn and Flashing Light See pages 10, 11, 12 and 13. Photo may include optional aquipmant. PC2000-. HYDRAULIC EXCAVATOR PRODUCTIVITY, ECONOMY & ECOLOGY In complete pursuit of total cost reduction and eco-friendliness Evolutionary Komatsu technologies Komatsu Technology Komatsu develops and produces all major components, such as engines, electronics and hydraulic components, in house. With this “Komatsu Technology.” and adding customer feedback, Komatsu is achieving great advancements in technology. ‘To achieve both high levels of productivity and economical performance, Komatsu has developed the main components with a total control system. The result is a new generation of high performance and economical excavators Powerful and Fuel Efficient Machine achieved by Total Power Management P02000-8 is equipped with the new Komatsu SAA12V/140E engine that features clean, fuel ctfcient and pawertul performance. Power losses in hydraulic eystem, cooling fan and PTO are reduced, Tolal Power Management using On-demand Power Control System eucoveds in drastically reducing the fuel ‘consumption per hour. The machine has ‘enhanced functions that contibute ta anergy: caving operation including adjuetable 'E mode’ and ‘Eco-gauge’. PC2000-8 is a new ‘generation clean and econamical machine. Fol consumption at E moda 10% rsscod ‘Compared with the PC1800-6 at DH mode and 100% working efficiency (fustgonsumoton varies denenaing on oo conditions, ‘ON-DEMAND POWER OPERATION SYSTEM ry P¢2000.s HYDRAULIC EXCAVATOR High Power Komatsu Engine Selectable Working Modes 713 KW (956 HP) Two established work modes are ood wimuihe Clon etcene) {urther improved. You can select turbocharger with lage aito-air oe valsorat Power or Economy modes using ee ere ere one-touch operation on the monitor ‘output of 713 KW (956 HP). The ample me engine power enables an increase in Pane depending on worbloads. work efficiency. The clean engine is TWO E made settings available, Tier 2 emission certiiedin USA (EPA). _eabling the operator to select opium rode that deters the best combination of production and fuel ctfciency considering working conditions. Heavy Lift Mode Turning the heavy lft mode ewitch on activates the all-out power delivery system 0 Increase the lifting force of the boum, This mode is beneficial ‘working mode Selection switch when handling rock and during heavy iting applications Advanced Environmentally Friendly Features Eco-gauge The Cco-gauge is provided on the right side of the monitor screen for eneray saving operation. The qauge Informs the operator of cumuiative achievement to a predetermined fuel consumption target. By keeping the gauge indication within the groon range, the operator can perform fuel efficient operation to meet the target value. eeorgauge Ialing caution To provont unnecessary fuel consumption, an idling caution is isplayed on the monitor wien the engine idles for 5 minutes or more ‘Auto deceleration and auto idling ayetem Tho machine is equipped with the auto deceleration system (1400 rpm), reducing operating nbise as well as {uel consumption. The auto iding system enables the engine idling ‘speed to be set at a lower speed. Power module packaging for ultra low-noise operation Noise sources such as the engine, cooling fan, and hydraulic pumps are packaged in the machinery house. Large sound absorbing blades attached on the air intake and exhaust coutit block noise transmission. Combined with the three dimensions hhybrid cooling fan, the machine realizes environmentiy-iendly ‘operation with amazingly low-noise. PC2000-6 HYDRAULIC EXCAVATOR EASY REPAIR & MAINTENANCE Designed and built for total cost reduction The evolution of reliability and durability Reduced Inspection/maintenance Sen ee and Overhaul Man-hours Achioves Total Cost Reduction Power module packaging for easy er Installation and removal of , ‘components Engine, radiator, oll cooler, hydraulic pumpe and PTO are packaged within the Power module. This design {aciltates installaion and removal of ‘components. contributing to the reduction of maintenance transportation and overhaul hours. aq TAG igh cooting Ericiency machine Durable Swing Circe with dosign Triple-Roller Bearing Increased oil cooler capacity lowers Large capac riple-oler bearing is the heat balance temperature of used for the swing ctela. The swing hydraulic ol to realize a cooler drole ondhures operating machine. Heat-resistant Rept & msintonance cost Ritor seasare isedin irate Samer Drastically reduced nt ‘excavating and pumps and cylinders to significantly paging work, and Compared with current model increase component durability. These whine excellant - improvements dramatically extend urabilty. Simple construction and enlarged the service lie ofthe hydraulic ‘components reduce the number of mar Gael Sturdy Guard and Large Track Use of a single-engine, enlarged Strengthened Frame Structure Link hydraulic pumps and simpitied Travel motors are shielded by sturdy Revolving frame, center frame and crawler frame are strengthened completely. The frames endure heavy: maintenance. Moreover, significant. work and exhibit excellent reduction of number of parts dlrabity contributes to reduction of overtiaul excellent man-hours. resulting in total cost durability reduction. ‘guards. They prevent the motors from being damaged by the thrust of racks, Enlarged track rollers, in combination with the largest size track links, provide hydraulic circuit enables reduced hours required for checking and P¢2000.s HYDRAULIC EXCAVATOR Heavy-duty Rock Bucket (optional) Packaged wear-resistant reinforcement plates are available, The repair cost ofthe bucket can be considerably reduced with the new design ‘RX mates Heavy-duty Rock Bucket with XS Tooth Komatsu developed, mea-esiset,ritrced material. Gina hardness 600 or more (100g as urs high woar resitanoe and less heat diced aeration tung ek cna, manana ong term XS Tooth + Unique bucket tooth shape, superior digaing pertormance + Long-term high sharpness + Great penetration perlormance + Hammerless, sale, and easy tooth replacement (Tooth replacement time: Half the conventional machine.) Wear-resistant Float Pin Boom top pin and arm top pin are floating type. Sinca the pin can frosly rolato, it receives loss friction load and exhibits excellent reliability and durabilly yy Arm Fock Protector Guards the ‘Arm Against Impact ‘Asin rock protector is equipped as Standard, The protector guards the am greasing piping against impact. PC2000-. HYDRAULIC EXCAVATOR EASY REPAIR & MAINTENANCE Sustained high level performance An achievement in the evolution of maintenance VHMS (Vehicle Health Monitoring System) (optional) \VHMS controller monitors the health conditions of major components and enables remote analycie of the machine and its operation. This process is supported by the Komatsu isvibutors, factory and design team. This contributes 10 reduced repair costs and to maintaining maximum availabilty. ‘atte munition (optcn) o Casa Kowarsu — 4 smputer tema Komatsu (to downloading etinters a WobCARE server ‘Advanced Layout for Easy Checking and Maintenance Catwalk surrounding the power module and center walkway provides easy access tothe inspection and maintenance points WE nine @ Suit jin Oro. rust ark ycraute puro adits Hyer tank, Airleanor or coer @ rycrautc ou ther Borat vive Bom suing mars Centralized Filters Centralized fiters contribute to easy maintenance. Monitor function Controller monitors engine oll level, cootant temperature, boattery charge and air clogging, etc. if controler senses any ‘abnormality, itis displayed on the LoD. Maintenance function Monitor indicates replacement time of oll and fters on LED when the replacement interval ic reached. Trouble data memory function Monitor stores abnormalities for effective troubleshooting, Remote Drain Piping Enables Drainage from the Ground emote drain piping provided to drain hydraulic cil, PTO cil, engine ol and coolant enable performing drainage work trom the ground, yeas [Foca chvoe orera) BM clan | Ground Refueling System (optional) Optional remote reueing hose enables ground level retueling Large Fuel Tank ‘3400 Itr 896 U.S. gal large tuel tank enables continuous operation for 24 hours. P¢2000.s HYDRAULIC EXCAVATOR ‘Automatic Greasing System Large Capacity Grease Tank and Easy Cleaning of Radiator Greasing work equipment and bucket is Easy-to-supply Refll Piping ‘The hydraulically driven fan can be fully automated. Since the system (optional) reversed to faciitate cleaning of the cartes out automatic greasing at ‘The machine is equipped with 200 itr 00g unt In adettion, this teature reguiar ime Intervals, greasing Is 2.8 U.S.oal large capacity grease tank —_entibutes to reducing warm-up time hassle-ree enough to perform 24 hours operation. ‘low temperatures. ‘An optional remote rel part enables ease supply fo the tank from the Fuel Pre-filter ground (with Water Separator) Remaves watar and contaminants from {ual to enhance the fuel eystem reliability. Reduced Maintenance Costs Hydraulic ol fiter replacement is extended from 500 to 1000 hours. Fue! fiter replacement interval is ‘extended from 600 to 1000 hours. Jp ere sol por onto) Dust Indicator with Five-step Indication Informs of air dearer clogging in tive steps 10 warn of titer concition Hydraul fiter (Eco-white element) 10 PC2000-. HYDRAULIC EXCAVATOR ComFort / WORKING ENVIRONMENT Operator first concept in every corner of the machine An achievement in the evolution of operator performance Excellent Operational Visibility Downward viibilty is drastically improved by extending the front windshield. This facilitates the operator view of machine footing. New interior arrangement eliminates blind spots in work equipment side and provides clear and wide range surtounding visiilly in combination with wide glass windows, Large Twin Wiper Large twin wiper ‘covore windehiold area and provides ‘excellent front viaibilty even in the: rain Dual Rearview Mirror Mirrore offer high vieibilty with fowor blind spots in left rear field of vision, New Operator Cab Specially Designed for Mining Step Light with Timer ‘Step Light with Timer proviees light tor 00 caconde to allow the operator to get off the machine. Now operator cab provides a comfortable working ‘environment. Sturdy cab of solid construction, with top guard conforms 10 OPG level 2 | OPG top guard level 2 integrated into the cab 3 Hammer for Emergency Escape and Fire Extinguisher ‘To prepare for emergoneci hammer for emergency escape is provided at the tront of the cab and a fire extinguisher at the rear. PC¢2000.s HYDRAULIC EXCAVATOR Emergency § vice & Fuel Cut-off Lever Emergency stop davies is provided at top Di two points on the power module as standard equipment, Engine start lock function of the device for use during maintenance work. In addition, fuel cut- off lever provided on the revolving frame allows stopping the engine trom tho ground ‘Emerasae sion switch Fue eta rer {nt enpne tort ok Iacon! Pecan hse (Ce) Dea) ena eee er cee) Bulkhead Wall (Fire Wall) High Intensity Discharge (HID) Prevents ol rom Working Light (optional) splashing into the HID working light with double the engine room luminance of conventional halogen leven It nyaraullc amp Is availabe for nignt work, hoses are ‘broken. Interconnected Horn and Flashing Light Allows the operator to give visual and audio notice to the dump truck operator. 1" 12 PC2000-. HYDRAULIC EXCAVATOR ComFort / WORKING ENVIRONMENT Equipment designed to minimize operator fatigue An achievement in the evolution of comfort performance Spacious and Comfortable New Gab Design Large cab designed for exclusive use in mining shovels provides enough apace to relax during operation. The cab with improved air tohtness is pressurized to prevent dust from entering. Combined with a large capacity twin alr conditioner that cools and heats the cab effectively, ample and ‘comfortable operating environment is realized, Cab volume 300% increased Compared with PC1800-6 Comfortable Air Suspension Seat ‘The seat with air suspension minimizes and softens vibrations lvansmitted to the operator, Depending on the operator's ‘weight anc physique, he cushion can be adjusted and the seat can clide fore/at and vertically Comfortable Operating Environment with Same Level of Low Noise as Passenger Cars Intogral structure of cab and now dampor mounts, in combination with power module packaging, attain outstanding lew noise and vibration in the cab equivalent to passenger Noise level 64.5 aa(a) Inthe cab on max. engine speed under no-load condition Se * $ “4 $ P¢2000.s HYDRAULIC EXCAVATOR Easy-to-see and Easy-to-use 7-inch TFT-LCD Large Monitor ‘Tho machina is equipped with 7-inch TFT-LCD large monitor for secure, and ‘smooth operation, Panel visibly is significantly improved by the use of the high-resolution TFT-LCD panel. The panel switch group is easy-to-use, enabling switch over of engine output and ineroase of iting force during operation. Furthermore, use ol function kay enables tha aperator to pertorm rmult-tunctions with ease. Character display can be selected among nine languages. ex (a oh een RAL my ea aa) © Trin an dapoaly one otnd te operator is lest ANE rat bie) etry My epson nator ‘Soret ighor 8 1“ PC2000-2. HYDRAULIC EXCAVATOR SPECIFICATIONS Model Komateu SAMAV140E & Type “Leyela, water-cooled cect injection Assiration a Turbocharged, tecooed Number of Glide » —— arr ove 1140 mm 5 51° ‘Stoke, 165 mm 6.50" Platon eiaplacomant 30.48 It 1860 in Governor Alkspeed, electric Horsevower ‘SAE J1905, . Gross 728 KW 976 HP. 180 9949 / SAE 1340" Not 713 kW 955 HP Rated 1pm 1600 ro Fan dive typo Hydraulic “Nethorsepomer atthe maximum sped fata Ing fn 679 KW 9191 EQ HYDRAULIC SYSTEM Type percent ad sening syst Number of Selectable working modes Main pa. Type. «+++ Natiable displacement piston pumps Pumps tor Brom, arm, bucket, swing and travel rccuits Maximum tow For attachment, swing and travel. 2817 ltrimin 612.2 U.S. gpm For fan orve ‘324 hrimin 85.5 US. opm Hydeaule motors: “Travel 2x axial piston motors with parking brake Siig 2x anal piston molars wilh wig lng brake Fan 2 x axial picton motors Feit valve senting: ‘tachment crcuits Backhoa 29.4MPa 200 kgliem 4.270 psi Loading shovel 284MPa_ 300 kylienr 4.270 psi Travel decut 32.0MPa 335 kgllcm® 4.760 pei Suing cicut 29.4MPa 300 kgtiem® 4.270 psi Pit chou, 29MPa SO kyl? 430 pst Hydraukc cylinders: Number of cyinders—ore x stoke Backhoe Boom, 2 300 mm x 2667 mm 11.8" x 104.2" a 2— 250mm x 218mm 38" x 842" Bucket. 2200 mm x 2170 mm 7.0" x 85.1" Loading shovel Boom. 2-280 mmx 1880mm_11.5"x76.0" arm 2— 200mm x2170mm 7" x 88.4 Bucket 2~ 225:mm x 2050mm 83" x 80.7" Bottom dump. 2—180mmx 600mm 7.17 29.1" FB devine everen ‘Swing gear 2x Pranetary gear ‘Swing orc tubecaton Grease ‘Swing holding brakes “Mecharical disk brakes ‘Swing speed. 48pm Ei onive svsren Travel goer Prentary goar Grasossy oe Narr vel peed 2.7 km 17 moh Pang bas Vode ok bates CO Track autor Groase Novorstoes ‘iv eaen soe foetal Dench se Noo ack aloe. Beach ede COOLANT AND LUBRICANT CAPACITY inernamey Ful take ‘3400 itr 898.3 LIS. gal Faciator weollr 476US. gal Engine. 420 Itr 31.7 US. gal Travel grar each sida BB ltr 225118 gal ‘Swing ives S0x2 itr 7.9%x2US.gal Hydraule tank 1200 tr 343.6 US. gal PTO ‘30 79S. gal & OPERATING WEIGHT (arrnoxmears) BACKHOE (Operating weight, inciuding 8700 mm 287" boom, 3800 mm 12°10" farm, SAE heaped 12.0 mv 15.7 yo gonocal purpose backhoe bucket, ‘Operator Iuorcant, coolant, ful fuel tank, and the standard equipment zo snes “Greate — [Got ria ese oe] annoy “o0are im satigien on ianeonin ages pe poe ‘otis ‘bid mm 24209 150tgen a zaps LOADING SHOVEL Operating weight, including $950 mm 19'6° boom, 4450 mm 147° ‘arm, 11.0 my 14.4 yd? heapod bucket, operator, lubricants, coolant, ful fue Yank and standard equipement Poz0008 Shoes ‘Operating Weta ‘Ground Pressure Dose woe 95000 9 ase mm 1.80 kgm es 9.80010 eral P¢2000.s HYDRAULIC EXCAVATOR mM Ut mm ramos ae Feo 1S 7 1 T b x #l la Ke 8 Neg i E spa 8 ge 2" | | Boyne soos’ |e sui0i7e" seso tee o) | sesoz0e "| BACKHOE WORKING RANGE Boone oar ae 3am 210 | Ho 9 Ham 2 [Ne dra st AS | Wc tg oh wma OF | ve wa reas ‘8mm 611 Ei door Sa ar theater hel siem 293 + Ra ona Treva TT | Hada rack ae 7 . a Sarma Buca gg for 5) 20 en US. ton Aum coma (a8) 85a BES ton Be eos 0 os un em ao 0) sas sa 107 6595.10 BUCKET CAPACITY (WEAPED) wor aaa Witoat sie went bevsiTy | acowenoeo | room sar, psa roe ‘Shands (im Site Stree) | (Cana) ses | srstete mye we nmi gb lye bye tea 157 mo 144 zm 12 zisey | 18 3000 | Gener puvose} xS185, 7173 0157, mar zats0__| 15 2500 | Gere ouvose | _¥3185, ‘Thoee chars are based on over-ideeabity wh ly loaded bucket t maximum reach, Wear atsian oueket 15 = LOADING SHOVEL DIMENSIONS Unt mm in 1907s a2" 7 wee ST a 4 2 7, {4 z aes ‘ aed ge & | ' SP ory sre? sla Ronntne sever wonminet rarer Working Range r Type rae Toon dong anaes Troma Pc coro wa Tet an— ars [Mu dwg he 208 © [x 9g ee [S180 mm 100 A 7 [Ne dapeg cho | — HT A [os oowig dine si an 1577 i. ewe mec Tea Becta ace 725 en NOUS. ten erry 7 ' raion RIBUS. ton cl LOADING SHOVEL BUCKET Te of bucket Baton ums capacy-neaped Tom aye ‘Wit (wit side ros) 20mm er Woah T4001 ath sie 6 To of bua ah 5 ea Soe TT OTD 16 A LIFTING CAPACITY I 1 PC2000-8 Eavioment: A: Reach rom sing carter + boom. 8.7 mer 8. Bucket hook height : © Arm 3.9m 1210" ©: Ling capacity 2 Bucket: 120 m1," Ct: ating over rent = ne ¢ Buchs eight: 9700 Kg 219608 Cs: Rating over side a Track shoe width: B10 mm 32": Rating at maximum reach Heavy Lift Off Un ka ae sino Teme via tami sono, sa Po fate fa fe fe Pete fe fate fate Te] zis | zie | esa | arse 5" | fea | “feo | aus | ioe Sra] 210 | zee | ase | ~ano | somn | ens | earn an ‘5m | -zaton [zon | seno | aston J=eomn | aan | eznn | san ie” | ison | 50 | “an | eon | “zeae | zee | Teo | -i00 Som | sasso0 [axon | rariso [senso | =aaso | vaaso | ees | sso 10" | “Zona | sito | exo | roam | “somo | stom | “2470 | -iaro0 3” | eer | sam | “eevoo| reson | “oesmo| somo | onto] “sonco| “tco| “peat am | ces00 | e030 coooe | aris [aoe [coun 1 soma | ease | -cnca | erm | San isto | atin] sano | onsin| waste | teu] “sta “ig | -auan | 2rom | 37200 [sp | aaso | zze0 | aon | arase | rao | rage | aren | anon | satan | sano 3 | -éseno | 3800 | em | 72am | -ionsm| atzon | izes | in| seam | vezn| -insan| shri | “azo | faze so" | “aason | com | “e500 | raann | “stan | “aco | irano| renzo] -tenrn| “700 -isto| “snaan| “hog | “nebo em | ast “aeasn ] sn | -stso [esas svn | srzo0 | roast [rosa | sason | ean 15" | 00 “reas | “oat | iio] -nrato| ize |viagoo| keto | 155200 | 1.20 | sda0) 20" | “300 | “5m =o a~ ots oT Ten] wm] ew] we atin | mmitn | nmin | tUS'en sumtin | omitn | mm | t0Sttn a ae eee | as oF a ae a | S| Sate aaa | Ba aL aa - Texan] wea cra Ten Cen mth |B, ty | SM, mie a ; as | 200 7 ame | a z et ae] aa TE | ui cab Cab base Revolving frame Power module ‘Fuel tank Tana ta [a 3a TT aa a aa Tate | roa aa ae a waar | ee at coer cm ee Counter weloht Center tame ——=«Undercarriage ——«Hydraulc tank Tai ae [aT eT 7s ae wa ‘ian ae ti sae a ia was oe] a BE wan ET? aa others Catwalk, step, handrail, small removed parts, ete. 18 S| See an aera ENGINE AND RELATED ITEM 1 ir cee, double element ry (side mounted) '* Two cooling fans with fan guard (Hydraulic dive, for radiator and cl eooten Engino, Komatsu SAAI2V140E 3 (uel pe-titers with water separators ‘© Garrasion resistors ELECTRICAL SYSTEM: ‘Aernators, 2 90 amp, 24V Bateres, 140 Ah, 4x 12 Staring motors, 211 KW Working igs, 4 boom, 4 cab base, 3 fuel tank top front, 1 lot front ana 1 ltt under ca side catwalk ‘Auto decelerator and auto iding system (8 AMIFM rack «© Lighting switches instiument panel UNDERCARRIAGE: ‘810 mm 32" double youser shoes 1 B track rolls /3 camer rollers (oach sido) ‘Hydraulic idler cushion (HIG) with stock absorbing accumulator ' Tiack guiding guard (Separate typo) ‘GUARDS AND Covens: ‘© Dvctproot not for radiator and ol ooolor ‘© Pumaiengine room partion cover ‘© Power medule under cover ‘Travel moter guard OPERATOR'S CAB: (Large damper mounted and prassutizad mining cheval caf with large tinted windshield, lockable door, large twin wipers and washers, floor mals, cigarette Fghtor,aehray and cup holders ‘© Instrument panel with electronic cspiay/montor system (7'-TFT- LCD), cloctrioally contvolled thrtle dal, electric service met ‘gauges (coolant temperature, hydraulic ol em, fel level, PTO il temp, engine oil temp), tuck counters, eco-gauge ‘# Buitin top guard conforming to OPG level 2 (ISO) ‘© Automatica conditioners (tin) ‘Scat fully adjustable air suspension with retractable seat bot © Iramers seat ‘© Sun shield Fire extinguisher N* BS oprionat EquipmENT HYDRAULIC SYSTEM: '# EOLSS (Elevtic Open Center Load Sensing System) ‘¢ 4 vatiable displacement piston pups (2 tandam pumps) for work ‘equipment, ravel and swing, 2 variable displacement piston ‘pumps (1 tandem pump) fr Tan dive {wo axial pston motors tor swing with single stage rele valve One ava ston meter pe ack or rave ith counterbalance «© Four contol valves (two integrated vaves) for work equipment, ‘wing and travel Control levers for work equioment and swing with PPC system ‘© Contol levers and pedals for vavel with PPC system © Ollenaler «High-pressure in-line ol filters Drain-fiters for pumps & motors ‘© Shockiess boom contol '* Two mode proseuro eating for boom DRIVE SYSTEM: Planetary rave! goar with axial picton motor © Travel parking brake OTHER STANDARD EQUIPMENT: ‘© uty-automatic greasing system with 200 iter 52.8 U.S. gal Manual arsase gun for track adjuster 1 Si ladder © Fuel tani, 3400 Iter 898 U.S. gal. '¢ Automatio owing holding brako ‘© Emergency engine stop switch and fuel shutoff lever ‘© Maintenance light fr night {© Step light wih tar 1 Light in machine ca ‘© Travol alam ‘wie catwalk and large handrail itoroannoeted hoen and flaching light (Dual rearview mirrors ‘VIIME (without Orbcomm) (Additonal 6 tuses and terminals ‘© Arms (Oackhoe): 3900 mm 1210" arm assembly 1 Ams (Loauing shove): 4450 mm 147" arm assombly ‘© Booms (Backhoe) —8700 mm 237" boom assembly 16 Booms (Loading shovel: —5950 mm 136° boom assembly ‘2 HID lamp system Rearview monitoring system 1 Cab ont guard PM tune-up service connection Track shoe, 1010 mm 40° ple grouser Cantar Fame under cover Groas eil syste (Wiggins) Fuel quick charge systom (Wiggine) ‘Communication system for VMS (Orcomm) Heavy-duty rock bucket 55 spac, ‘Addlonal fier system for poor-quality fuel ‘Adslional po:claaner for angie ar titer (Enginaio) Full Janath track quiding quares 19 ‘www.Komatsu.com Printed in Japan 200610 IP.As(10) KOMATSU’ CENOO 130-00 ‘Materials and speotications are subject to change without notice. is a trademark of Komatsu Lid. Japan.

You might also like