You are on page 1of 1

APLOC;

cpfmkfile -f inf -l 1024 HGPFIOUT EXCHVOLUME


cpfmkfile -l 512 HGPFIDT EXCHVOLUME
mml
ioiop:io1=all;
saaep:sae=800,block=all; !value of AF must be more than the value selected for
IOIOI!
IOIOI:IO=AF-20; !choose a free AF if AF-20 is already used use another one !
IOAFP:IO1=ALL; //To check status of AF whether free or used
IOIOP:IO1=AF-20;
IOAFC:FILE= HGPFIOUT,IO=AF-20;
IOAFP:IO1=ALL;
IOAFT:FILE= HGPFIDT;
HGPFI:MSISDNS=all,ext; !after this release the terminal by doing cntr+d!
IOFAT:FILE= HGPFIDT;
IOCML:FILE= HGPFI,DATE=141017,TIME=1230,IO2=AF-21,proc=d,DAILY; !to schedule DT in
APG to collect daily O/P!
IOCMP; !value must be in wait till the execution time comes! This will tell
whether HLR DUMP IS AUTOMISED OR NOT

You might also like