arisi2003 280 ASCII In Only,
‘The Processor is waiting for another ASCII message, The AIN is controlled by C100.
Once a valid message has been recieved, the AIN needs to be deactivated and then
restarted,
oe
[AIN” Port Number
Data Destination vao0
Maximum Variable Length Ke
Interchar. Timeout None
First Char, Timeout None
Byte Swap None
Termination Code(s) 00
Overflow Error 2
Busy co
Complete ct
Interchar. Timeout Ercor nia
First Char. Timeout Error nla
Ifthe AIN is not enabled, turn it back on,
2 }
‘Once the AIN instruction recieves a valid message from @ device:
4. It will deactivate the AlN instruction
2. Move the data from the temporary Input registers to another location
3. Zero out the incoming data registers,
ct 100
BR {RST
(io
Ke
or
oot
[Mov
‘v3000
(loa
0400
FUL
Ko
Pagetarisi2003 280 ASCII In Only,
‘Count the number of valid messages that the PLC reciaves. This is net nesded for any
Cconisol, but just to see that 2 message was recieved by the processor correct
cs
oi eer
xso00
_Fistscan
eS
Page 2