Professional Documents
Culture Documents
q Part / Accessory
Release Date: March, 2001 Model(s) Affected: V3D DOS and Pro32™
WA-1003
Priority Status:When Subject Exists Alignment Machines
Thermal mirage may occur in either DOS or Pro32™/Windows machines. Settings may be done in the same manner
on both DOS and Pro32™ machines.
A Cold Weather V3D solution has been developed for use with Pro32™ V3D alignment systems. This is available at
http://www.equiserv.com/software/jbc/ColdWeather3D.exe for those who have Internet Access to the Technical
Support web site. This is a downloadable, self-extracting zipped file that may be used to correct Cold Weather V3D
thermal mirage issues.
An installation procedure for this program may also be downloaded from the same site. See
http://www.equiserv.com/software/jbc/InstallationInstructions.PDF for the downloadable instructions.
For those who do NOT have Internet Access, the following procedure may be substituted. When modifying settings
manually, care must be taken to follow the instructions precisely.
ACTION TO BE TAKEN:_________________________________________________________
NOTE: Prior to starting any edit procedure on the HMAIN.CMD file, make a backup copy of that file. This may
be done from the DOS prompt by typing copy hmain.cmd hmain.old then
pressing ¬. A backup copy of the HMAIN.CMD file will be stored on the hard drive under the name
HMAIN.OLD. This provides insurance should an error be made when editing the HMAIN.CMD file.
CAUTION: Arrow down until the listed file appears. Under NO circumstances change any settings other than
the ones listed or by more than the amounts shown or accuracy will be compromised!
.bat files may be written to allow the customer to switch from “hot weather” to “cold weather” parameters easily. A .bat
file can be written and dropped on the desktop of a Windows unit, or may be written and left in the root directory of the
hard drive on a DOS machine, together with instructions regarding how to activate the patch accessed using the .bat
file.
To create a cold weather parameter .bat file, go to the DOS prompt (for either Windows or DOS machines) and
type the following sequence:
Copy con cold.bat ¬
Cd\ias\prog ¬
Rename hmain.cmd hmain.hot ¬
Rename hmain.cld hmain.cmd ¬
(for Windows) exit ¬
(for DOS) start ¬
(press and hold the ctrl key and type Z. This will show on the screen as indicated) ^Z ¬