Professional Documents
Culture Documents
3G Winfiol Commansds
3G Winfiol Commansds
html
relationcapability-ifls
rxpli:mo=rxotg-43,uc;===>cf reload.
<mgaap:area=ktselw1;
!NodeB
./moshell SITE
lt all
get . maxNumHsdpaUsers
license key
00373_BKU_BHSEY> hget ipsyncref operationalState|syncStatus
get 0
lh ru fm getfaults
get . gracetime
00373_BKU_BHSEY> get . aUsers|lUsers
get . maxNumHsdpaUsers
get . maxNumHsPdschCodes
get . maxNumEulUsers
get . maxNumADchReservation
get . hsCodeResourceId
get . Dynamic
get . steeredHsAllocation
get . queueSelectAlgorithm
get . numHsCodeResource
get . numEulResources
get . StateStandardized
get . eulMaxOwnUuLoad
get . schPowerDeltaCongGbr
get . schCongPeriodGbr
get . schNoCongPeriodGbr
get . eulMaxAllowedSchRate
get . eulMaxShoRate
get . eulNonServHwRate
get . featureStateEnhancedLayer2
get . maxFileSize
get . maxStorageSize
get . maxTotalOutputPower
get . hsPowerMargin
get . cqiAdjustmentOn
get . Flexible
get . Qam
get . fqBand
get . maxDlPowerCapability
lget AntFeederCable dlAttenuation
get iub
lget sectorantenna antennatype
lget sectorantenna maxtilt
st ret
get . electricalAntennaTilt
get . userPlaneTransportOption
get . StateDualStackIub
al
To check for any errors on the E1 links use the following command:
pmx e1 pm �m 1
!!!OTHERS
pget . pmReceivedAtmCells
lacc vc eteloopback
"lget
Equipment=1,SectorAntenna=1,AuxPlugInUnit=2,RetuDeviceGroup=1,RetDeviceSet=1,RetDev
ice=1"
!!CHANGE
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!
!RNC
cedr -r IUB_ZABQEW
maxTotalOutputPower
cedr -r Iub_USMMOO15_0108
!!CHANGE
!GERAL
!TILT
"lset SectorAntenna=1,AuxPlugInUnit=2,RetuDeviceGroup=1,RetDeviceSet=1,RetDevice=1
electricalAntennaTilt 60"
y
"lset SectorAntenna=2,AuxPlugInUnit=2,RetuDeviceGroup=1,RetDeviceSet=1,RetDevice=1
electricalAntennaTilt 50"
y
"lset SectorAntenna=3,AuxPlugInUnit=2,RetuDeviceGroup=1,RetDeviceSet=1,RetDevice=1
electricalAntennaTilt 50"
y
"lset SectorAntenna=4,AuxPlugInUnit=2,RetuDeviceGroup=1,RetDeviceSet=1,RetDevice=1
electricalAntennaTilt 60"
y
"lset SectorAntenna=5,AuxPlugInUnit=2,RetuDeviceGroup=1,RetDeviceSet=1,RetDevice=1
electricalAntennaTilt 40"
y
"lset SectorAntenna=6,AuxPlugInUnit=2,RetuDeviceGroup=1,RetDeviceSet=1,RetDevice=1
electricalAntennaTilt 40"
y
!CALIBRATION
"lacc SectorAntenna=1,AuxPlugInUnit=2,RetuDeviceGroup=1,RetDeviceSet=1,RetDevice=1
forcecalibration"
y
"lacc SectorAntenna=2,AuxPlugInUnit=2,RetuDeviceGroup=1,RetDeviceSet=1,RetDevice=1
forcecalibration"
y
"lacc SectorAntenna=3,AuxPlugInUnit=2,RetuDeviceGroup=1,RetDeviceSet=1,RetDevice=1
forcecalibration"
y
"lacc SectorAntenna=4,AuxPlugInUnit=2,RetuDeviceGroup=1,RetDeviceSet=1,RetDevice=1
forcecalibration"
y
"lacc SectorAntenna=5,AuxPlugInUnit=2,RetuDeviceGroup=1,RetDeviceSet=1,RetDevice=1
forcecalibration"
y
"lacc SectorAntenna=6,AuxPlugInUnit=2,RetuDeviceGroup=1,RetDeviceSet=1,RetDevice=1
forcecalibration"
y
al
AAL2 Setups
pmx -h -m 7 aal2ap=b65
===================================================================
First Argument:
- <moGroup>|<moFilter>|<proxy>: to specify the MOs in the current node which
should be used for the comparison.
- <modumpFile>: to specify an modump, taken from this node or another node. The
modump file should be a zipfile taken by the command "dcgk". Alternatively it can
be a te
xt or gzipped file containing the printout from the "get" or "kget" command.
- <modumpDir>: to specify a directory containing modump logfiles. Only files with
the extension ".log" will be used in the comparison.
Examples:
>> diff . #Compare all MOs with the relevant
baseline parameter file stored in moshell/commonjars/pm.
>> diff . default ~/audit_070110 #Same as above but store the results
in the directory ~/audit_070110
>> diff ~/moshell_logfiles/logs_mobatch/2007-01-10/mysites/11-21 #Compare all
modumps under that directory against the relevant baseline parameter file stored in
moshe
ll/commonjars/pm
>> ldiff msplatform=1 mgw_parameters_r4.txt #Compare all MOs under msplatform=1
in the current node with the baseline file "mgw_parameters_r4.txt"
>> diff . rnc10_before_upgrade.txt #Compare all MOs in the current node
with the MO dump "rnc10_before_upgrade.txt"
>> diff rnc10_before_upgrade.txt rnc10_after_upgrade.txt #Compare the MO dumps
"rnc10_before_upgrade.txt" and "rnc10_after_upgrade.txt"
pmNoOfNonHoReqDeniedHs,