Professional Documents
Culture Documents
071116
P ASOLINK
N ETWORK
PNMT (Java version)
Installation Manual
(WindowsXP)
M ANAGEMENT
T ERMINAL
NEC Corporation
Copyright © 2007
ROI-S06554
Table of Contents
8. Launching PNMT............................................................................................................ 40
-i-
ROI-S06554
1. Installation Sequence
Only Administrator group privilege level users are authorized to configure the following settings,
-1-
ROI-S06554
(2) Click the Phone and Modem Options icon in the Control Panel window to start
configuring the modem.
-2-
ROI-S06554
(3) Enter your country and area code in the Location Information window. Click [OK].
-3-
ROI-S06554
(5) Select the Modem tab. Click [Add] to continue with adding the new modem for the PNMT.
(6) Check Don’t detect my modem ... and click [Next] to continue.
-4-
ROI-S06554
(7) Select Standard Modem Types from the list of Manufacturers and Standard 19200bps
Modem from the Models. Click [Next] to continue.
(8) Select Selected ports and COM#, then click [Next] to continue.
-5-
ROI-S06554
(10) Verify that Standard 19200 bps Modem and COM1 are displayed. Click [OK].
-6-
ROI-S06554
(2) Select Install from a list or specific location [Advanced] and click on [Next].
-7-
ROI-S06554
(3) Insert the USB driver CD-ROM in the computer’s disk drive and select Search for the best
driver in these locations and check Search removable media [floppy, CD-ROM ...] then,
click [Next].
-8-
ROI-S06554
-9-
ROI-S06554
4. Dial-up Setting
(1) Click Start | Settings | Control Panel and the Network Connections icon to start
configuring the Dialup setting.
(2) The Network Connections window appears. Click Create a new connection in the Network
Tasks area.
- 10 -
ROI-S06554
(3) The Welcome to the New Connection Wizard window appears. Click [Next].
(4) Select Connect to the network at my workplace and click [Next] to continue.
- 11 -
ROI-S06554
(6) Select Modem - Choose a connected port, and click [Next] to continue.
NOTE
- 12 -
ROI-S06554
(7) In the New Connection Wizard window, input connection name into Company Name
field.
Click [Next].
- 13 -
ROI-S06554
(8) Enter any number in the Phone number field and click [Next] to continue.
- 14 -
ROI-S06554
(9) You can also create a shortcut on your desktop if desired. Click [Finish].
RS232C connection
USB connection
- 15 -
ROI-S06554
(10) In the Connect Dial-up Connection window, click [Cancel] to continue. Click Properties in
the Connect Dial-up Connection window.
(11) In the Properties Window click on the General tab. Click [Configure].
- 16 -
ROI-S06554
(13) Retain the default setting on the Options tab and click the Security tab.
- 17 -
ROI-S06554
(14) Retain the default setting on the Security tab and click the Networking tab.
(15) On the Networking tab, verify that PPP ... is`displayed in the Type of dial-up server I am
calling field and uncheck File and Printer ... and Client for Microsoft....
- 18 -
ROI-S06554
(16) Click Settings Uncheck all the boxes in the window that appears, as shown below. Click
[OK] to go back to the previous window. Highlight Internet Protocol (TCP/IP) and then
click [Properties].
(17) Verify that both Obtain an IP address automatically and Obtain DNS server address
automatically are selected.
- 19 -
ROI-S06554
(18) In the Advanced TCP/IP Settings window, uncheck Use IP header compression for the
PPP link. Click [OK].
(19) Retain the default setting on the Advanced tab and click [OK].
- 20 -
ROI-S06554
NOTE
(1) Select Start Æ Setting Æ Control Panel, then, in the Add or Remove Programs window,
click Add/Remove Windows Components.
(2) The Windows Components Wizard window appears. Remove the check from
Management and Monitoring Tools, and then click Details ...
- 21 -
ROI-S06554
(3) The Management and Monitoring Tools window appears. Confirm that Simple Network
Management Protocol is not checked and click [OK]. Return to above window and click
[Next].
- 22 -
ROI-S06554
- 23 -
ROI-S06554
(7) Confirm that SNMP Service is installed and it has started automatically. Select Action Æ
Properties on the menu bar in the Services window, or right-click SNMP Service and then
click Properties in the SNMP Service pop-up menu.
(8) Select Manual in the Startup type field and click Stop in the Service status field on the
General tab. Click [OK] or [Apply].
- 24 -
ROI-S06554
(9) Confirm that the Status of both SNMP Service and SNMP Trap Service is stopped, and that
the startup condition for each one is Manual.
- 25 -
ROI-S06554
6. PNMT Setup
NOTE
(1) Insert the PNMT Installation CDROM.Open the CDROM folder and double-click
install.exe.
- 26 -
ROI-S06554
(4) Specify the directory in which the PNMT is to be installed. Click [Next].
Restore Default Folder:
Click this button to choose the license key folder
Choose:
Click this button to select another directory
NOTE
- 27 -
ROI-S06554
(5) Specify the License Key file if one is available. Click [Next].
Restore Default Folder:
Click this button to revert to default path
Choose:
Click this button to choose the license key file
NOTE
You may use the PNMT on a trial basis for 30 days. After
that the PNMT can ONLY be used IF the license has been
imported (activated). To obtain the license please contact
NEC.
- 28 -
ROI-S06554
- 29 -
ROI-S06554
- 30 -
ROI-S06554
(2) Select the Network and Internet Connections from the Control Panel window.
- 31 -
ROI-S06554
(3) Select the Network Connections from the Network and Internet Connections window.
- 32 -
ROI-S06554
(5) Right click the Local Area Connection and select the Properties from the context menu.
(6) The following Local Area Connection Properties window will appear as default.
- 33 -
ROI-S06554
(7) Confirm that the Internet Protocol (TCP/IP) is only checked on the General tab, and then
click on the Authentication tab.
- 34 -
ROI-S06554
(9) Remove the check on the Enable network access control using IEEE 802.1X, and then click
on the Advanced tab.
(10) The following Advanced tab will be displayed, and confirm that there is no check on the
Advanced tab.
- 35 -
ROI-S06554
(11) Return to the General tab and select the Internet Protocol (TCP/IP), then click on the
Properties button.
- 36 -
ROI-S06554
(12) The following Internet Protocol (TCP/IP) Properties window will appear. Select the Use the
following IP Address instead of the Obtain an IP address automatically. Set the IP address,
Subnet mask and Default gateway as follows:
Item Setting
IP Address 172.17.254.254
Subnet mask 255.255.255.252
- 37 -
ROI-S06554
(13) The following Advanced TCP/IP Settings window will appear. IP Settings, DNS, and
WINS are not required. Select the TCP/IP filtering on the Options tab and click on
Properties button.
- 38 -
ROI-S06554
(14) The following TCP/IP Filtering window will appear. Confirm that there is no check on the
Enable TCP/IP Filtering (All adapters) and all the Permit All on the TCP Ports, UDP
Ports and IP Protocols are selected. Click on OK button returning to Local Area
Connection Properties windows.
(15) Click on Close button from Local Area Connection Properties window to complete the
Network Connections Setting on Windows XP.
- 39 -
ROI-S06554
8. Launching PNMT
(1) Click Start | Programs |PNMTj |PNMT to start the application.
(2) If he following window appears, select [Unblock] (when using the Windows XP SP2
Firewall).
- 40 -
ROI-S06554
(3) Enter User name and Password, and Select the Connection Entry.
NOTE
- 41 -