Professional Documents
Culture Documents
Usb Game Controller Installation & Test: How To Install in WIN98
Usb Game Controller Installation & Test: How To Install in WIN98
Picture 1
Picture 2
D、Connect the controller to the PC USB port. Your computer will find the new hardware
automatically then. Click “next”. See below.
Picture 4
E、click as below:
Picture 5
Picture 6
Picture 7
Picture 8
Picture 9
Note: You may need to offer WIN98 installation disk here. Click “next”
Picture 10
Click “finish” and the installation is finished. (Note: You can install the USB joypad
into your computer first as there is no difference at all.)。
● Installation in WIN2000/XP
● Product test
A、 You can test the product performance. Open “control panel” as below.
Picture 11
Picture 12
Picture 13
C、You can test the controller button’s function here. (Above picture)
D、 Go to“Calibration” to adjust and get the best performance. Click“Default” and set
its center as default standard status. You can set the center at any point you like.
First press the controller two buttons (at least) and set it to one point. Then press
“Set” and the center has been set.(See below.)
Picture 14
E、Click “Vibration” and test the vibration effect here. Press some buttons and then
you will get the feeling.
Picture 15
Picture 16
Here, if you want fix button 1 as button 5, you can press arrowhead
on the right of “Button1”to choose“Macro Setting”.
Picture 17:
Picture 17
Establish note
Button
direction
Picture 18
Picture 20