Professional Documents
Culture Documents
Nemo Windcatcher Ver 3 5 6 0 DT Release Notes PDF
Nemo Windcatcher Ver 3 5 6 0 DT Release Notes PDF
COM/NEMO
DOCUMENT NUMBER
NNNNNNNNN ISSUE N
NEMO WINDCATCHER DRIVE TEST RELEASE NOTES
Copyright
The information contained in this document is confidential and no part of it may be copied or
reproduced in any form without the written consent of Anite Network Testing. Additionally, this
document is not to be passed to or discussed with third parties without the prior written permission
of Anite Network Testing.
Anite’s products are subject to continual development and specifications may change. Users of
Anite’s products and documentation should exercise their own independent judgement to evaluate
the suitability of Anite’s products and documentation for their particular use. Anite does not accept
any liability arising from the application or use of the product or this documentation.
All reasonable care has been made to ensure that this document is accurate. If you have any
comments on this document, or would like details of any Anite products, services or equipment,
please contact us through the Anite website.
Page 2
NEMO WINDCATCHER DRIVE TEST RELEASE NOTES
CONTENTS
Page 3
NEMO WINDCATCHER DRIVE TEST RELEASE NOTES
Route Reader
Ascom product 8.4.5 12.0
TEMS Automatic 9.2 11.0 - 11.3, 10.x, 9.2
TEMS Pocket 13.2 16.0, 15x, 14.x
TEMS Pocket Lite NA 13.2
TEMS Symphony 7.2 7.0 - 7.7.2
TEMS Investigation 15 18.0, 17.x, 16.x
3) VIAVI (JDSU)
a. RAN Advisor (.AOD) 19.0, 19.1-2, 20.0, 20.1-2
b. TrueSite (.AHD) 1,40, 1.40a, 1.40a1, 1.41, 1.43
Please ensure the following option under HomeProcessing defaultVendor Specific menu is
selected to process .AOD and .AHD log files:
Page 4
NEMO WINDCATCHER DRIVE TEST RELEASE NOTES
6) DataPro – v4.4.2
7) Qualcomm QXDM
a. 80-VP457-2_YK_LTE
b. 80-B5704-2_WCDMA-Y
c. 80-B1188-2_YE_CDMA1X_1XEV
d. QCHAT 5.0
8) Rohde&Schwarz
a. Romes 4.76
9) PCTel – 1.4.0.1
a. LX, CX, EX, MX, EXFlex and IBFlex Scanners
13) Huawei
a. Genex Probe Logfile version 2.13
14) MCEM/FalconSmart
Page 5
NEMO WINDCATCHER DRIVE TEST RELEASE NOTES
2 NEW FEATURES
You can select the Nemo Fast Loader from Processing Default settings under the “Home”
Tab.
From Processing default Configuration window select the Vendor Specific menu and then
from Nemo options select the “Use Nemo Fast Loader”.
Note: Nemo Fast Loader is based on Nemo Vendor Events so any analytics
related to the events from L3 signalling is not available in Nemo Fast Loader.
Note: Geobinning as a binning option is not supported with Nemo Fast Loader
For Nemo Fast Loader there are Nemo specific report templates available (based on Nemo Events):
Page 6
NEMO WINDCATCHER DRIVE TEST RELEASE NOTES
Page 7
NEMO WINDCATCHER DRIVE TEST RELEASE NOTES
Page 8
NEMO WINDCATCHER DRIVE TEST RELEASE NOTES
Note: In this release metrics can still be selected also traditionally from the menus for
the Map view, for the Time Series Chart and for the Data Table view. It is highly
recommended that you select the metrics and/or events either from the parameter tree
or from the traditional metric/event menus.
Page 9
NEMO WINDCATCHER DRIVE TEST RELEASE NOTES
If you select for example “Retainability” category, there is a pie chart for the root causes
and a pie chart for the sectors that has been affected by any of the root causes shown in
the root cause pie chart.
In addition to the pie charts you will see the map and event analysis grid as well as
before and after RF analysis grid. The Event Analysis Grid & RF Analysis grids works in
sync with the failure analysis.
Page 10
NEMO WINDCATCHER DRIVE TEST RELEASE NOTES
You can now further analyse one of the root causes by clicking on top of the root cause
wedge. The selected wedge for that root cause gets bit loose from the pie chart and now
you can see the effected sectors for that root cause as well as the event and RF analysis
grids.
You can do similar, more detailed analysis also for the antenna orientation and for the
overshooting.
Page 11
NEMO WINDCATCHER DRIVE TEST RELEASE NOTES
The failure analysis can be used also for analysing VoLTE events. If you have VoLTE data
you need to select 4G as a technology and Voice as a service.
Accesibilty Retainability
Page 12
NEMO WINDCATCHER DRIVE TEST RELEASE NOTES
Page 13
NEMO WINDCATCHER DRIVE TEST RELEASE NOTES
After processing the data you can select the KPIs from the “Map” tab menu.
Page 14
NEMO WINDCATCHER DRIVE TEST RELEASE NOTES
Page 15
NEMO WINDCATCHER DRIVE TEST RELEASE NOTES
By further expanding you can get the actual metrics and events visible to select the ones
to be used in the report template.
Page 16
NEMO WINDCATCHER DRIVE TEST RELEASE NOTES
Now you can just drag and drop the wanted metric to the template. You can select
multiple metrics with the different metric type to the same template.
After you have selected the metric or event you must complete the metric and device
settings. After dropping the Metric to one of the cells the settings window will appear to
the right-hand side of the window
You need to select the data set and device from the
Device Database or from Label or from ID scroll-down
menus. After doing that the data base, device ID and
the device label will be shown in the menu windows
Page 17
NEMO WINDCATCHER DRIVE TEST RELEASE NOTES
You also need to select the type of the metric to be shown in the report. The selection can
be made from the Metric type drill-down menu. There are totally 14 different types to
select:
Average,
Count (Number of samples)
Sum
Minimum
Maximum
Standard deviation
Mode
Median
Histogram
Multimetric
Value
All value
List
With the multimetric option you can select the multiple simultaneous metrics to be shown
side by side in the worksheet. For the selected metric the record_index, phone_id,
latitude, longitude, and time are populated from the bin_data table in the database. When
using the multimetric type, it must be selected for the first metric dragged to the
worksheet and the rest of the metrics can be dragged and dropped onto any of the cells
in the multimetric row.
Page 18
NEMO WINDCATCHER DRIVE TEST RELEASE NOTES
Pie chart should now be visible and it can be re-sized or re-located for the report
template.
If the “Value” is selected as a metric type, all the metric values with the actual
measurement data in a bin are shown whereas with “AllValue” selected also the bin
values with the default value are shown in the case that the bin does not have actual
measurement value.
Page 19
NEMO WINDCATCHER DRIVE TEST RELEASE NOTES
For the map plot you need to select the threshold to get the correct legend with the pre-
defind thresholds .Open the drill down menu for the thresholds and select the one for the
selected metric (RSRP in this example).
You can change the location of the map plot in the template by first clicking on the
“Location” field in the Metric setting menu and then clicking the new cell location on the
work sheet. You can also re-size the map plot area. Again, first click on the “Location”
field in the Metric setting menu. Then select the cell where the metric is and paint the
wanted cells to get the wanted size.
Page 20
NEMO WINDCATCHER DRIVE TEST RELEASE NOTES
2.6.4 Conditions
For the metrics and map plots there are pre-defined conditions to be used if you want see
only some range of the metrics. Open the “Condition” drill-down menu, select the wanted
condition(s) and set the values.
If there is a need for additional conditions needed customer can create also own
conditions.
To save the template just click the icon, browse the location
and give the name to the template.
Running the report follows the same procedure used with the
predefined standard report templates – go to reports, open
custom report and run it.
Note: If this custom template is used to create the report for some other dataset
you must re-select the devices for each of the metrics or maps in the template.
This must be done in order to link the template to correct dataset.
Page 21
NEMO WINDCATCHER DRIVE TEST RELEASE NOTES
Page 22
NEMO WINDCATCHER DRIVE TEST RELEASE NOTES
3 RESOLVED ISSUES
Page 23
NEMO WINDCATCHER DRIVE TEST RELEASE NOTES
4 REPORT TEMPLATES
With Nemo Windcatcher installation there comes pre-defined report templates copied to the
folder:
C:\Users\[user]\Documents\Anite Nemo\CustomReport
There are totally over thirty templates for creating reports from drive test log files.
BenchMarking Report Data Template
BenchMarking Report Voice Template
CDMA_PrePostReport
iDEN Sample Report
iDEN Sector Overshoot Report
GSM Acceptance report
LTE Acceptance Report
LTE Band Performance
LTE Data Task Report
LTE Performance Report
LTE Pre Post Report
LTE Site Count Report
LTE Throughput Analysis Report
LTE Throughput Details
LTE TroubleShooting report
Nemo Benchmarking Data Report
Nemo Benchmarking Voice Report
UMTS Acceptance Report
UMTS PrePostReport
UMTS Sector Overshoot Report
UMTS TroubleShooting report
VoLTE Acceptance Report – Lite
VoLTE Acceptance Report
VoLTE Acceptance Report with Nemo Events
VoLTE Acceptance Report with Nemo Events - NFL
VoLTE Negative Events Report
VoLTE RTP Audio Gap Report
WiMAX Acceptance Report
Nemo CDMA PrePostReport
Nemo UMTS PrePostReport
Nemo LTE PrePostReport
Nemo GSM Acceptance report
Nemo UMTS Acceptance report
Nemo LTE Acceptance report
Nemo UMTS TroubleShooting report
In addition to the pre-defined report templates there is also a sample template (Custom
Report_sample) for customizing own reports.
Page 24
NEMO WINDCATCHER DRIVE TEST RELEASE NOTES
5 KNOWN ISSUES
Page 25
NEMO WINDCATCHER DRIVE TEST RELEASE NOTES
6 INSTALLATION INSTRUCTIONS
Prerequisites:
1) For the users using the Nemo License Setup with Sentinel HL
dongle the license file (c2v) must be updated to be able to
use Nemo WindCatcher release 3.5.6.0
2) Please install Microsoft .Net Framework 4.6.2 from the following link:
https://www.microsoft.com/en-us/download/details.aspx?id=51625
Once Microsoft Framework is installed, users can verify complete installation by checking
the following installs using program list.
3) Install the Microsoft Visual Studio 2012 C++ Redistributable from the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=30679
Installation:
All windows applications must be closed prior to WindCatcher installation. If stand-alone license
(Dongle) is in use, the user should unplug the dongle before starting the installation.
Page 26
NEMO WINDCATCHER DRIVE TEST RELEASE NOTES
Download the WindCatcher.exe file and run it to begin the installation. Follow installation steps
and click Finish when complete.
If a previous version of Nemo WindCatcher is already installed on the computer, then while
installing the new version a pop-up window will appear to uninstall the existing version.
Page 27
www.anite.com/nemo
CONTACT DETAILS
Support nemosupport@anite.com
© 2015