Professional Documents
Culture Documents
Table of Contents
Page 1
https://techinfo.toyota.com
TS Lite PRO Kit Installation Instructions – Rev 1.2
Installing MongoosePro MFC Software from Techinfo Website
Required to proceed:
• PC with Windows 7 (32-bit or 64-bit), or 8 (32-bit or 64-bit), and Internet Explorer
(procedure below is specific to Windows 7 32-bit PC and MongoosePro MFC VIM)
• PC configured for access to the Internet
Page 2
https://techinfo.toyota.com
TS Lite PRO Kit Installation Instructions – Rev 1.2
3. Click on Run to begin the installation.
4. Setup screen appears as shown below. Click on “I accept the terms in the License
Agreement” then click on Install.
5. During the installation, you will be notified to attach the MongoosePro MFC device to the
computer after the installation is complete. Click on OK.
Page 3
https://techinfo.toyota.com
TS Lite PRO Kit Installation Instructions – Rev 1.2
6. Once the software installation is complete, click on Finish.
7. Connect the MongoosePro MFC VIM to the PC via USB port. The Mongoose driver will be
installed automatically. After a few minutes, confirm the green LED light in the DLC3 (OBD-
II) end of the cable is flashing. This indicates the driver is installed and MongoosePro MFC
VIM is ready to be used.
Page 4
https://techinfo.toyota.com
TS Lite PRO Kit Installation Instructions – Rev 1.2
2. Click on TIS -> Diagnostics -> ScanTool -> Techstream v9.10.037 Full Software
Installer
Note: At the time this document is written, the latest software version available is v9.10.037.
You may see an updated version listed.
Page 5
https://techinfo.toyota.com
TS Lite PRO Kit Installation Instructions – Rev 1.2
4. Click on Run to begin the installation
Page 6
https://techinfo.toyota.com
TS Lite PRO Kit Installation Instructions – Rev 1.2
7. Accept the License Agreement terms and click on Next
Page 7
https://techinfo.toyota.com
TS Lite PRO Kit Installation Instructions – Rev 1.2
10. Click on Finish to complete the installation
3. Select a Language from the Drop-down option (English is default) and click on Next
Page 8
https://techinfo.toyota.com
TS Lite PRO Kit Installation Instructions – Rev 1.2
4. Enter the required information as shown below and click on OK to continue
Page 9
https://techinfo.toyota.com
TS Lite PRO Kit Installation Instructions – Rev 1.2
3. Login to techinfo.toyota.com website
4. Enter a Computer Name and a Shop/Owner Name and then click on Calculate Key
Page 10
https://techinfo.toyota.com
TS Lite PRO Kit Installation Instructions – Rev 1.2
6. Return to Techstream Registration screen and paste the Key in the New Key: box then click on
OK to register.
Page 11
https://techinfo.toyota.com
TS Lite PRO Kit Installation Instructions – Rev 1.2
4. Vehicle information should be populated as the example shown below. Select the
appropriate vehicle Option: and click on Next.
5. From the System Select menu, select an ECU and click on the Green Arrow to confirm
communication with the ECU.