Professional Documents
Culture Documents
Proximal surface:
• Reduce proximal surfaces 1.0 mm
1 of 3
STAINLESS STEEL CROWNS
Crown Preparation:
• Select crown and trial fit.
• Check crown height in occlusion.
Crown margins should extend 1.0 mm
below gingival crest.
5
2 of 3
STAINLESS STEEL CROWNS
Crown Cementation:
• Isolate tooth, rinse and dry. Mix cement
and fill crown, assuring voids are not
present in cement. 3M™ ESPE™ RelyX™
Luting Cement is recommended as an
easy to use fluoride releasing cement.
9
10
11
3 of 3
3M ESPE Customer Hotline 1-800-634-2249 70-2009-2459-8B
Please refer to instructions for more detailed information 44-0019-9062-9
as well as precautionary and warranty information. © 2003 3M
3M, ESPE, Unitek and RelyX are trademarks of 3M or 3M ESPE AG.