Professional Documents
Culture Documents
BANCADA STRUCTURE: built in one piece provides solids, low center and great rigidity
BANCADA BOX WAY STRESS: The displacement unit and the base are connected by
drawer guides. Structure of great rigidity with fast advances in X Z axes of 24m / min.
RECIRCULATING BALL SCREW IN X & Y SHAFTS: High precision bolts class C3 ø 32
mm & ø 40 mm for X and Z with direct coupling coupling achieving a pre-tension ensuring
high positioning precision.
ASSEMBLY DESIGN: Bench with 30º inclination provides great ease in the collection of
chips, great stability and anti-vibration capacity.
STANDART SUPPLY ACCESSORIES: AUTOMATIC OFF / AUTOMATIC LUBRICATION
/ ANCHORAGE / OIL TANK & SOLENOID / A2-6 HYDRAULIC PLATE & CYLINDER /
FULL FAIRING / WORKING LIGHT / ELECTRIC CABINET HEAT EXTRACTOR /
PROGRAM FINISHING LIGHT / EXTRACTOR OF CHASSIS AND BASKET / PLATE
OPERATION PEDAL / 1 SET OF SOFT CLAMPS AND RIGID JAWS / TOOL HOLDER
FD & ID / JOYSTICK PORTABLE
STANDART PROVISION ACCESSORIES: CLAMP HOLDER / BAR FEEDER / PRE-
SETTING TOOLS
Characteristic of a punching
- Proper clearance between punch and matrix.
- 10% of the thickness of the material in case of normal sheet metal.
- Adjust the path of the descent so that the punch crosses the matrix in 1 or 2 mm.
- Do not punch with dull punches and dies.
- The frequent lubrication of the punch decreases the resistance offered by the material
when it is extracted by the punching stop, which exerts a lower pressure on the insert and
a lower wear of the punches.
- The punching stop must be aligned correctly with respect to the matrix, so that when the
material is lifted by the punch, the stop acts on the totally parallel material. If it is not well
aligned it could cause a quick breakage of the punch since the material performs the
function of lever and in a few blows could damage both the punch and the other parts that
make up the punching station.
- In case of punching stainless material. It is recommended that the punches have an
inclination in the cutting area to reduce power and decrease the vibration and noise
produced at the time of punching.
- Correct centered between punch and matrix