Professional Documents
Culture Documents
Curriculum Vitae: Personal Details Name Selvan. C.J
Curriculum Vitae: Personal Details Name Selvan. C.J
J,
Contact No: +965-69954267
E-mail: genmotind1@yahoo.com
CURRICULUM VITAE
Personal Details
NAME Selvan. C.J
Gender Male
Material Status Married
Date of Birth 10/06/1983
Passport No. G2395633
Nationality Indian
Languages Tamil, English
Current Monthly Salary: 6000 USD
Formal Education
(2001.2005) Bachelors of Engineering in Mechanical in Government Institute of Technology,
Anna University, Chennai, India.
(1998.2000) Government of Higher Secondary School, Tamil Nadu, India.
(1989-1998) Government of High School, Tamil Nadu, India.
Professional Review:
Specialization in Thermal and mechanical design of heat exchangers like Shell & tube (API
660), Breech lock exchanger, Air cooled exchangers (API 661), Plate frame exchangers(API
662), Hairpin type exchangers(API 663) & Fired Heater (API 560) by using HTRI/HTFS.
Performing Strength calculations & Analysis for High pressure vessels, Columns, Reactor,
3-2 phase separator, Reforms(pressure retaining parts), Flare stacks, Shell & tube
exchangers, Air coolers(Pressure retaining parts), Multitube exchangers, Double pipe
exchangers, Breech lock exchanger, Hot oil furnace, catalyst reformers, Fired heaters, In-
Direct bath heaters, Heater Treater, De-Salter, Cone roof tank, dome roof tank, Double
deck floating roof tank, double wall tank & filters by manual calculation and by using PV-
Elite, Compress, E-Tank & Staad Pro.
Specialization in selection of heat exchangers for offshore and onshore oil&gas application.
Preparation of Tube sheet layout and baffle cut diagram in process data sheet.
Thermal rating & mechanical design of all types e.g. Fixed tubesheet (AEM, BEM, NEN,
AEL), Breech-lock exchanger, Floating Head type (AES, BES, AET, BET), U tube type (AEU,
BEU), exchangers with longitudinal baffle (AFT-two pass shell), BHU (double split flow),
BGU (split flow), Kettle type (AKU, BKU) shell & tube exchangers using HTRI exchanger
Suite
Thermal rating and mechanical design of double pipe & multitube exchangers using Xjpe &
Xhpe modules in HTRI
Preparing tube layouts & baffle sketches, Vibration analysis using TEMA Standards &
Tubesheet thickness calculation (for fixed tube sheet & U-tube type exchanger)
Preparation of Mechanical design data sheet for Pressure vessels, Heat exchangers,
And Storage tanks.
Preparation of Technical Specifications, MR, PR and TBE/TBA for Pressure Vessels, Heat
exchangers & Storage tanks.
Feed, EPC, Design & detailed engineering of pressure vessel, heat exchangers, storage
tanks for oil&gas(offshore, onshore) & refineries.
Design and detailed engineering of Horizontal double wall underground and above ground
storage tank by UL-58 and UL-142
Design & Detailed Engineering of Pressure vessel with “U” Stamp Requirement
Design calculation and detailing of pressure vessel, heat exchangers & storage tanks by
ASME, EN-133445, PD-5500, WRC-107/297, PED, Shell DEP, TEMA, API650, API
660, API 12K,API 620, NACE-MR0175(ISO 15156), UL-58 & UL-142
Performing Thermal Design Calculation By Using HTRI, HTFS & B-JAC for heat
exchangers and API-2000 for tank emergency venting
Preparation of piping stress and support calculation for skid piping and structural
calculation for skid
Conceptual Studies of ASME, API, TEMA, BS 5500, PED, EN13445, AD-Merkblatter, WRC
107,297 & client reference standard to fulfill Client & code requirements (U, S-Stamp)
Field of Experience: Mechanical Design & Detailing of Pressure Vessel (ASME SEC VIII Div-
1,2),Tanks(API 650,620), Heat Exchanger thermal design (TEMA, ASME,API 660), with
Software like PV-Elite, Compress, Tank 3.3, HTRI, Codecalc, CAESAR-II, .
EXPERIENCE DETAILS:
Current Company: Kuwait National Petroleum Company, Kuwait(KNPC)
Project: Refinery plant engineering at Mina Al-Ahmadi
Position: Mechanical Design Engineer - Static Equipments
4 May 2015 - Till Date
Preparing FEED documents, Site survey & feasibility study report for static
equipments for refinery modernization project and future up-gradation project, Preparation of
mechanical data sheet, specification & technical tender documents for static equipments, Which
includes,
Failure analysis of a wide range of static equipment, resolution of repetitive or chronic
reliability problems
Failure analysis heat exchanger due to deposition and inadequacy of wash water for
refinery and LNG Import facilities
Design & detailing of cryogenic vessels & tanks.
Prepare design basis for static equipment for new expansion project
Implementation of project requirement from operation and maintenance department.
Analyzing all critical equipment for frequent failures and recommending corrective
measures
Up gradation of exchanger metallurgy based on RCA recommendation
Thermal rating of heat exchangers in HTRI.
Preparing purchase specification & technical tender specifications for static
equipments
Technical Bid Evaluation of vendor offer, review and approval of vendor documents/
drawings
Participates in HAZOP, Tier 2 Risk Assessment Studies
Participates in capital budget proposals related to the Engineering Development
Section, including budgetary quotations, approvals and endorsements.
Up gradation of equipment materials for bad actors, especially for heat exchangers
Resolving site related problem with process, operation & maintenance team
Review of vendor document/drawing for flare stack, fired heaters, shell & tube
exchangers, Breech lock exchangers, Air-Cooled exchangers, pressure vessel,
columns, reactors, floating roof tank & dome roof tank.
Utilization of MAXIMO System
Review and approval on contract trend request and deviation request for major
projects
Piping stress analysis by using CAESAR-II
Structural calculation by manual as well as by using STAAD Pro
Software Skill:
Basic Computer Knowledge(MS Office),
AutoCAD ,PDMS,PV-Elite, Compress, Tank, HTRI & Aspen one
AREAS OF INTEREST: