Professional Documents
Culture Documents
Tutorial 2G
Tutorial 2G
There is still many subscriber since TA>9, the adjacent to Puger is too far
6 'Wait for New OA Site at Lojejer, between Wuluhan and Puger
Many failed HO Purwodadi-2 due to blocking on target cell (Pasar - Change TCH Traffic Busy Threshold (%) Pasar Bangorejo DCS-2 from 50 to 10
7
Bangorejo DCS-2) - Change AMR TCH/H Prior Cell Load Threshold Pasar Bangorejo DCS-2 from 45 to 5 Handover Parameter
- Change Min Access Level Offset from Jajag GSM-0 to JajaG DCS-0 from 10 to 0
8 Many failed HO Jajag GSM-1 due to blocking on target cell (Jajag GSM-0)
- Change PBGT HO Threshold from JajaG DCS-0 to Jajag GSM-0 from 70 to 72 Main Road GSM DCS Remark
Many Fail HO from Dringu-0 to Gending-2 (cells where are in the edge
of the BSC border & on the Main Road) due to Downlink Quality
MR. Preprocessing from ‘No’ to ‘Yes Edge HO DL RX_LEV Threshold 10 (Flat ar 20 Higher value will be easy to get target cells
-Fail HO due to hardware failure at Jatirogo-1 (to ADJC Jatirogo DCS-1); - Proposed replace new DRFU at Jatirogo-1 TRX 7
9 Edge HO UL RX_LEV Threshold 6 (Flat area 16 Lower value will be hard to get target cells can be dropped call
10 - Radio link prompt alarm and trx faulty on SonggoN DCS-0 - Reset cell (already fixed right now) Edge HO Watch Time(s) 4 4
11 -Site flicker; - HO already back to normal (greater than 95%) Edge HO Valid Time(s) 2 2
It's hard to HO from source cell to candidate
increase Edge HO DL RX_LEV Threshold (hill terrain) Edge HO AdjCell Watch Time(s) 4 4
12 increase Edge HO UL RX_LEV Threshold (hill terrain) Edge HO AdjCell Valid Time(s) 2 2
-Call Drops due to Radio Link Failure ; -Propose parameter (try to be hard to HO) :
Inter-layer HO Threshold from 15 to 25;
13 Inter-layer HO Hysterysis from 2 to 3; Inter-layer HO Threshold 25 15
*HOSR (HO_out Ej--> due to better cell (pingpong HO, ussualy for diferent band from GSM to DCS or otherwise) and Downlink Quality) Inter-layer HO Hysteresis 3 2
*Sometimes adjust RXLEV_ACCESS_MIN (from 15 - 20….for DCS) Layer HO Watch Time(s) 4 4
*Inter-layer HO Hysteresis & Inter-layer HO Threshold at HO Parameter with Thrshld (25) & hyst(3). Layer HO Valid Time(s) 2 2
Min DL Power on HO Candidate
Source Cell---> dikurangi (25-3=22)-->-110+22=-88……….Level Value <-88 di Source akan terjadi HO from source to target Cell 20 12
Min UP Power on HO Candidate
Target Cell--> ditambah (Thrshld(25)+hyst(3))-->-110+28=-72……….Level Value >-72 di target akan terjadi HO Cell 18 10
*Inter-layer HO Hysteresis & Inter-layer HO Threshold at HO Parameter with Thrshld (15) & hyst (2). =make value higher as last way to adjust HO Parameter
Source Cell---> dikurangi (15-2=13)-->-110+13=-97……….Level Value <-97 di Source akan terjadi HO from source to target
Target Cell--> ditambah (Thrshld(15)+hyst(2))-->-110+17=-93……….Level Value >-93 di target akan terjadi HO
*TCH Block & TCH Dropp is high simultanly in BSC since 13 july 2009 due
BSC Dringu3 Assignment measurement need to be actived for AMR (Speech Ver. 3)
6 to File expired
7 Bima-1 DCS Many blocked call & dropped call Reduce call attempt by reduce CRH (concequency is low traffic)
BSC Dringu3 Low TCH blocking performance BSC '-Adjust Support Half Rate from No to Yes
High Traffic in DCS, need to share Traffic with Kota Blater Ex Bank
Kotablater DCS-2 -Adjust Inter-layer HO Threshold Kota Blater Ex Bank indonesia-2 from 35 to 30
8 indonesia-2
9 STO BesuKi GSM/DCSGSM and DCS Blocking Expand DCS from 4 to 8 TRX
10 JajaG DCS-0 Site loceted in LAC border Propose to increase antenna mechanical downtilt
11 Ponpes Zainul Hasan All Three sectors are blocking Wait DCS colocated on air
TCH Block Flicker on 18 May 2009 due to high TCH Seizure Request, but
Tanggul GSM-0 already back to normal on the next day
No Action
12
13 Tegaldlimo-3 Cell Flicker on 28 May 2009 No action
-Adjust Support Half Rate from No to Yes
Sabrang-1 High Blocking, need to Half Rate activation
14 -Adjust Speech Version from 001011 to 101111
Kalibaru-0 Failed TCH Seizures in TCH Handovers due to Busy TCH (Traffic Channel) Change Min Access Level Offset from Kajarharjo-1 from 0 to 3 (PRIORITY)
15 GSM-GSM (LOW VALUE)
KarangDoro DCS-1 Failed TCH Seizures in TCH Handovers due to Busy TCH (Traffic Channel) Change Inter-cell HO Hysteresis from Karangdoro DCS-2 from 4 to 6
16 DCS-DCS (LOW VALUE)
Gn Gending-2 Failed TCH Seizures in TCH Handovers due to Busy TCH (Traffic Channel) Change Inte-Layer HO Hysteresis from Gunung Gending DCS-2 from 68 to 70
17 GSM-DCS (LOW VALUE)
Need traffic sharing with DCS -Propose Adjust neighbor threshold parameter :
Edge HO UL RX_LEV Threshold from 6 to 16;
Edge HO DL RX_LEV Threshold from 10 to 20;
Inter-layer HO Threshold from 25 to 15;
Tiris-1 Inter-layer HO Hysteresis from 3 to 5;
Min DL Power on HO Candidate Cell from 18 to 10;
Min UP Power on HO Candidate Cell from 20 to 12;
18 Andre style
Adjust Tlogosari-0; Min UP Power on HO Candidate Cell from 13 to 14; Min DL
19 Tlogosari-0 Higher Traffic than DCS Cell Power on HO Candidate Cell from 16 to 17 Leon / Fercoy Style
5.4 Query Daily Report Huawei EJ--> Failed TCH Seizures in TCH Handovers due to Busy TCH (Traffic Channel) & High TCH/SDCCH Seizure Request (Sucesfull >< Request (Attempt))
4 High Traffic for one of band or both lead to high blocked call, see tch "traffic" GSM & DCS in raw data on topten tools (make a new pivot if needed) or Erlang Table (Mostly used)
4.1 if both of GSM & DCS is same high traffic, pls check is there any TCH blocking at DCS/GSM if wish to proposed SDCCH. Otherwise for SDCCH blocking
*Blocking Analysis: Sharing to GSM or DCS if high traffic (see first Utilization TRX GSM/DCS ) by adjust CRO (DCS priority), PT (GSM), RXLevMin (DCS) or add/delete SDCCH/TCH. If Both are full traffic just adjust TCH Traffic Busy Threshold (%), AMR TCH/H Prior Cell Load Threshold (example). If already adjusted just propose expand TRX. (0%--> all Half Rate, Jika > 70% pindah ke HR)
*if need traffic sharing to DCS: make DCS more POPULAR by Adjustment CRO DCS higher (example from 10 to 12, max=13) so easier cell reselection incoming. Oposite w/. RXLevAmin
*CRO GSM: C1=C2 (Level); CRO DCS=C2; Focus on DCS if any high traffic for one of them
*CRH (cell Recellection hyst)-->'Reduce CRH to 8dB---> semakin kecil CRH (Selisih source w/. Candidate cell) maka semakin mudah Cell re cellection.
*TCH Block & TCH Dropp is high simultanly in BSC since 13 july 2009
iM2000-->right click--->New Query-->BSC600-->
Ver.1-->Full Rate
Ver.2-->EFR
Ver.3-->AMR
KarangDoro DCS-1 Failed TCH Seizures in TCH Handovers due to Busy TCH (Traffic Channel) Change Inter-cell HO Hysteresis from Karangdoro DCS-2 from 4 to 6
8
*if wanna change "TCH Traffic Busy Threshold(%)" in channel management from 51 to 1 (example) see that "AMR TCH/H Prior Cell Load Threshold (=50, example)" is less than "TCH Traffic Busy Threshold(%)"
*SDCCH & TCH blocking, lack of channel > 0.5an ---> Add 1 channel SDCCH on TRX Hopping; SDCCH & TCH blocking, lack of channel < 0.5an--> Remove 1 channel SDCCH from TRX Hopping to TRX BCCH
*If GSM & DCS are blocking ---> Expand DCS from 4 to 8 TRX
No CellName Problem cause
1 MuncaR-2 -Over coverage >TA 20 ;Neighbour Adjacent > TA 8;
- Call Drops on Traffic Channel in Stable State (Connection Failure)
Sooko Tuban-2
c
Many drop HO due to high TCH Blocking (with HO) to neighbor Gn Melawang-1
Kedung Jajang-3
-Call Drops due to Radio Link Failure ;
4 Jorongan-1
-Call Drops due to Radio Link Failure ;
5 Maron IKC-2
8 Tanggul GSM-2 Call Drops due to Interference with Umbulsari GSM-2
14
24
-Over coverage >TA 20 ;
Neighbour Adjacent > TA 14;
* Change MAIO--> just Export (Config menu BSC6000-->Import/export data-->Ex/import network plan parameter) the cell that u want to change
*Sometimes adjust RXLEV_ACCESS_MIN (from 15 - 20….for DCS)
*Sometimes adjust parameter HO if any problem on HOSR previous
*Correlation between E1/T1 Alarm Indication Signal (AIS) to the increment of TDR in BSC
*Prosentase dropped call tinggi karena traffic rendah ada byk dropped call / bad quality on hopping chanel or cannot HO--> adjust di HO Param
*CRH (cell Recellection hyst)-->'Reduce CRH to 8dB---> semakin kecil CRH (Selisih source w/. Candidate cell) maka semakin mudah Cell re c
MuncaR-2
-Over coverage >TA 20 ;
Neighbour Adjacent > TA 14;
-Retune BCCH
-Proposed Down Tilt
-Reduce Power Control:
DL RX_LEV Upper Threshold 34 to 28
DL RX_LEV Lower Threshold 24 to 20
Also adjust parameter as above to ADJCH (for hometown & hi-TDR)
- AMR DL Qual.Lower threshold from 4 to 3 and DL Qual.Lower threshold from 4 to 3; - AMR DL Qual.Upper
threshold from 2 to 1 and DL Qual.Upper threshold from 2 to 1
Change Max TA from 62 to 49, 20, 14 (depend on TA to nearest neighbor + 5, for Idle only-->paging)
Adjust Gn Melwang-1
'- Change TCH Traffic Busy Threshold(%) from 60 to 1
- Change AMR TCH/H Prior Cell Load Threshold 59 to 0
- Proposed add sectors for DCS cells
- Adjust Min UP Power on candidate cell from 8 to 10, and Adjust Min DL Power on candidate cell from 10 to 12
- AMR DL Qual.Lower threshold from 4 to 3 and DL Qual.Lower threshold from 4 to 3
Change TRX Priority TRX10 and TRX11 to Level7
- Change TRX Priority TRX5 from Level1 to Level3
- Change TRX Priority TRX6 from Level2 to Level7
- Change TRX Priority TRX7 from Level3 to Level7
- Change TRX Priority TRX hopping become Level7
- Change Min Access Level Offset to Alas Malang DCS-1 from 10 to 5
- Change Min Access Level Offset from Alas Malang DCS-1 from 5 to 10
- Change PBGT HO Threshold from Alas Malang DCS-1 from 68 to 72
- Change Inter-Layer HO Hysteresis from Alas Malang DCS-1 from 68 to 72
res (Traffic Channel), Call Drps on Traffic Channel, TCH Avaibality and Due To HW failure…
in Stable State (T200 Expired) & Radio Link failures (compare w/. Call drop on TCH), Call drop on Traffic Channel in stable state (Connecti
parameter) the cell that u want to change (MAIO is changed in MS Excel). Then Import via BSC6000
anel or cannot HO--> adjust di HO Parameter (Emergency HO) reduce DL/UL qual trshld (exmp.) 60-50 ) and DL/UL QualLimit AMR FR/HR 65-50 , so Quality turun sedikit la
date cell) maka semakin mudah Cell re cellection.
- Proposed Downtilt +4;
Change Parameter :
TCH Traffic Busy Threshold(%) From 31 to 51;
AMR TCH/H Prior Cell Load Threshold From 30 to 50;
Remark
UL RX_LEV Lower
Threshold & AMR UL
RX_LEV Lower
Threshold must be
greater than Edge HO
UL RX_LEV Threshold;
DL RX_LEV Lower
Threshold & AMR DL
RX_LEV Lower
Threshold must be
greater than Edge HO
DL RX_LEV Threshold
nex-mboun style
Andre style
Fatwaman style
QualLimit AMR FR/HR 65-50 , so Quality turun sedikit langsung bisa HO -->selisih DL/UL qual trshld & DL/UL QualLimit AMR FR/HR 65-50= biasanya 15
No CellName Problem cause action Plan Remark
-Many SDCCH drop due to interference in TRX Hopping
Sumberanyar Paiton-1 -Drops due toERR IND Received on SDCCH in Stable State (T200 Expired) -Propose adjust parameter T200(SDCCH) from 150 to 180, 200, 210, 220,...
1 -Many Radio Link failures happened on TA>10, cell located in inner city Lumajan -Propose to move SDCCH Channel from TRX Hopping to TRX BCCH or…
2 Lumajang-0 SD Drop
3 Sooko Tuban-2 - High SD Drop due to excersive coverage more than TA>10 - Proposed Down Tilt +2 SD Drop
-Call Drops on Traffic Channel in Stable State (Connection Failure)
4 Balen Bojonegoro-1 - Proposed Down Tilt +2
-Over coverage many subcribers served more than TA 12
High SDCCH Loss Number due to MOC, many subscribers with bad UL Quality
Propose re-azimuth and downtilt +4 degrees
5 Cerme Bondowoso-1 or many Radio Link Failures on TA>... SD Loss
Klatak-2 - High SDSR - Max Retrans from 4 to 2
6 SD Loss
-SD Loss due to Radio Link Failure ; -Propose parameter :
PG Panji-2 PT (s) From 0 to 31;
7 CRO(s) From 0 to 5; SD Loss
8 Tulungrejo-0 Some subcriber on TA>10 Change Max TA from 62 to 16
- High Locup to other sites with different LAC due to excersive coverage more
Sukowidi-2 than TA>6 - Proposed Down Tilt +2
9 '-Many Location Update Failed in border LAC due to Far TA ;
- Increase CRO Rogojampi-0 0 to 3
SDCCH Loss Due to Locup - RxLev_Access_Min DCS from 10 to 15 and PT(s) from 0 to 31
10 RogoJampi-0 - Reduce CRO to adj RogojampiDCS-0 from 15 to 13 SD Loss
11 WonosaRi-0 Some subscriber served until TA = 22 Make GSM cell less attractive; adjust PT from 0 to 31; CRO from 0 to 2
Since LAC changing on 29th May 2009, many SDCCH Loss happen due to
propose to reduce Location Area Update; adjust PengArang (Pucang Anom)-0 PT from 0 to 31, CRO from 0 to 3
12 PengArang (Pucang Anom)- Location Area Update
High SDCCH Loss due to many Location Update Failures between Site
Propose to adjust Tumpeng (Wonosari 2)-0 MAX TA from 62 to 20
13 Tumpeng (Wonosari 2)-0 Tumpeng (Wonosari 2) - LAC 486 and LAC 495 SD Loss
14 Ketapang-0 - High Locup to other sites with different LAC - Proposed Swap Bangsring
Sukosari-0 Site Sumber Wringin DCS-GSM and Tlogosari DCS-GSM are planned in changing LAC from 486 to 495
High SDCCH Loss Number due to Location Area Update failures
15 Sukosari-1 Site Sumber Wringin DCS-GSM and Tlogosari DCS-GSM are planned in changing LAC from 486 to 495 SD Loss
16 Tanggul GSM-2 Call Drops due to Interference with Umbulsari GSM-2 Propose BCCH Retune on Tanggul GSM-2 also check HSN surrounding sites
17 Combat Purwoharjo-0 Bad Quality on hopping channel Move traffic to Combat Purwoharjo DCS-0, Change CRO from 13 to 16 or Reduce CRH for GSM
18 Plampangrejo-2 Bad Quality on hopping channel Move SDCCH to TRX that contain BCCH (not hopping)
19 Kedungringin-1 Sudden increasing of Location Update on 14-jun-09 from 08:00-12:00 Already back to normal
High SDCCH Loss Number on 05/26/2009 and 05/27/2009 due to VSWR Alarm already rectified by BSS Team. Now SDCCH Loss number already decreased significantly
22 Kota Kulon DCS-0 SD Loss
Kedungringin-1 Propose Downtilt Antenna +2
Low level on Uplink
23 MuncaR 3-0 Increase RXLEV_ACCESS_MIN from 8 to 10
24 MuncaR 3-2 Higher Traffic than DCS Cell, Need Traffic sharing with DCS colocated - Increase CRO MuncaR 3-2 0 to 3and PT(s) from 0 to 31
*SDCCH Loss Due to Locup (mobility cross between LAC, Periodik, Attached-DeTached (On & Off HP simultanly) coz SDCCH-->signal is needed when will MTC/MOC and also for LU, Overshooting)
*if need traffic sharing to DCS: make DCS more POPULAR by Adjustment CRO DCS higher (example from 10 to 12, max=13) so easier HO incoming. Oposite w/. RXLevAmin
*Radio Link Alarm has a big contribution for bad SDSR (Seizure SDCCH)
*SD Loss= K300(SDCCH Seizure Request) - CA3030J(Call Set-up Indication (SDCCH) (Circuit Cervice))-->SDSR_Analysis
*SDSR Analysis:
HW_KPI_Performance = Trend+HW Failure+Alarm
CTRX Measurement
Query Daily = SD Loss
SDCCH_Monitor = SD Drop
SDSR_Analysis = Locup
1 TopTen (tools)
1.1 BSC Performance (to see bad KPI)
1.2 Cell name (Specific cell that have a bad KPI / see exactly the time)
1.2.1 Alarm Justification by Correlation "alarm histories BSC6000" and "HW_KPI_Performance (TCH/SD Avaibality or else..)" to see the flicker, if yes= Otre, if No= (see below)
or drop due to HW failure in Query…
2 i M2 00 0 (TA)
3.1 TA and PowerbalanceHWEJ
3.2 TCHF_TCHH DL_HWEJ
3.3 TCHF_TCHH UL_HWEJ
*u/ Power Balance, jika 1-3 > 10% maka ada problem di HW
*u/ TRX yang kotor bisa dilihat pada TRX BCCH (TRX1) & TRX Hoping (2,3,4..)
4 High Traffick for one of band or both due to high blocked call, see tch "traffic" GSM & DCS in raw data on topten tools (make a new pivot) or Erlang Table (Mostly used)
4.1 if both of GSM & DCS is same high traffic, pls check is there any TCH blocking at DCS/GSM if wish to proposed SDCCH. Otherwise for SDCCH blocking
*jika bersamaan ada problem di flicker, TA & traffic maka prioritasnya fokus di "Traffic"
*Blocking Analysis: Sharing to GSM or DCS if high traffic by adjust CRO, PT,RXLevMin or add/delete SDCCH/TCH. If Both are full traffic just adjust TCH Traffic Busy Threshold (%), AMR TCH/H Prior Cell Load Threshold (example). If already adjusted just propose expand TRX. (0%--> all Half Rate, Jika > 70% pindah ke HR)
5 iM2000:
5 .1 H OSR (H O_ out Ej--> d ue to better cell (p ing po ng HO, u ssual y for GSM & DC S) a nd D own lin k Qua lity)
5 .2 TDC H (mostly fo r d opp ed cal l an alysi s)
5.2.1 HW_Tsel_TCHMonitor EJ--> TCH seizure Request >< Succesful TCH Seizures (Traffic Channel), Call Drps on Traffic Channel, TCH Avaibality and Due To…
5.2.2 TDR_SubCounter EJ--> Sub….Drops due toERR IND Received on SDCCH in Stable State (T200 Expired) & Radio Link failures (compare w/. Call drop on TCH), Call drop on Traffic Channel in stable state (Connection Failure)
5 .3 SD CCH (mo stl y for do ppe d call a na lysis)
5.3.1 HW SDSR_Analysis-->Compare between Attempt (Request) and Sucsess (Call setup)
5.3.2 HW_Tsel_SDCCHMonitorEJ ≈ TDR_SubCounter EJ
5 .4 Que ry D ail y R epo rt Hu awe i EJ
NOTE: (CRO)
C1 =MS mel akuka n Peng ukura n 5x seca ra peri odi k se ti ap ma sing 2 BTS da n mend ap at 1 BTS yg dip ili h.
C2 & C1 b isa d ili hat di Tems.
CR O (2d b)=15, mean ing i s: 15 x2=30
misa l di tems C1=15 d g CRo =1 3, j adi C 2=41
The effect a fte r Adj ustment CRO GSM & DCS is op posi te (se e the formul a abo ve).If the cel ls is pop ula r,the PTs beco me 0.
case s:
GSM ful l tra ffic ne ed sh are to DCS--> C RO GSM 5 to 0 & PT 31 to 0
-->g oo d sign al bu t hi gh BC .
*if need traffic sharing to DCS: make DCS more POPULAR by Adjustment CRO DCS higher (example from 10 to 12, max=13) so easier Cell reselection incoming. Oposite w/. RXLevAmin
*Inter-layer HO Hysteresis & Inter-layer HO Threshold di HO data/umum BSC6000 (bukan di HO adjacent (khusus))
Adjacent Cell--> ditambah (layer(30)+hyst(3))-->-110+33=-77……….Level Value >-77 di target akan terjadi HO
Se rving Cel l---> di kuran gi (30 -3=27)-->-110+27 =-83 ……….L evel Val ue <-83 di So urce aka n terja di HO fro m so urce to ta rget
*TDR Due to Equipment Failure is able to escalate to BSS, except BlockCall
*B ad K PI Pe rfor ma nc e da ily/hourly
1. Al arm Suspe ct (E1 /T1 AIS, Many LAPD & Ce llOu tOfService , Hi -BER, R adi o Lin k p rompt Al arm, e tc)
2. Cel l Con tri bu ti on---> Trend p erforman ce cel l by brea kdow n cell s (To pten too ls-HW KPI)
-TCH/SDC CH Avail abi lity or HW Fai lure
-Ce ll ou t o f servi ce fo r re lated si te o r si te su rrou ndi ng
-Hi -SD/TC H tra ffic sud den ly duri ng p erio d per-BSC o r p er-Ce lls
-Hi -SD Loss due to Lo cup, hi-SD traffic/Hi-Se izure d fo r SD CCH / TCH , HW Fa ilu re/Ala rm (o r se e abo ve); * SD Loss= K300 (SDCC H Seizu re Req ue st) - CA30 30J(C all Se t-u p In dica ti on (SD CCH)
(Ci rcuit Cervi ce))
Walas Marari