Professional Documents
Culture Documents
Peace of Mind
Through 360º
Low Power
316L Stainless Steel Solenoid
Housing and Valve High Flow
Standard Solenoids
Worldwide Approval
Registered
Solenoid Operator is Free to Rotate 360º Solenoid operator and mounting block (patent
pending) are free to rotate 360º allowing for an easy
cable layout and ease of connection wiring. Solenoid
internals rotate with operator and prevent cables
being pulled out of terminal block.
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please Quality Assurance
refer to the product catalogue issue list on our web site or All Bifold products are manufactured to a most stringent
is a member of the
2 www.bifold.co.uk contact a member of our sales team.
Slimline Solenoids
Registered
Worldwide Approvals.
Solenoid Operator is Free to Rotate 360º Solenoid operator is free to rotate 360º allowing for
an easy cable layout and ease of connection wiring.
Solenoid internals rotate with operator and prevent
cables being pulled out of terminal block.
Compact Enclosure Design No time penalty for heat dissipation before removing
solenoid cover.
Coil Leads
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please Quality Assurance
refer to the product catalogue issue list on our web site or All Bifold products are manufactured to a most stringent
is a member of the
www.bifold.co.uk contact a member of our sales team.
State of the Art Testing The standard solenoid operator is a holding magnet
type which ensures the valve will operate in damp
conditions. The risk of corrosion to internal
components is reduced, unlike other valve types that
incorporate a solenoid core tube design with a
'wetted' armature that will only operate in dry air
conditions!
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please Quality Assurance
refer to the product catalogue issue list on our web site or All Bifold products are manufactured to a most stringent
is a member of the
4 www.bifold.co.uk contact a member of our sales team.
Selection Table
† Solenoid must be used in conjunction with a correctly matched, Intrinsically Safe (IS) solenoid driver.
The valve installer is responsible for a correct and safe IS system.
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please Quality Assurance
refer to the product catalogue issue list on our web site or All Bifold products are manufactured to a most stringent
is a member of the
www.bifold.co.uk contact a member of our sales team.
Selection Table
SCHEMATIC 3/2 NU
½" NPT Ports, 3 Way 2 Position, Direct Acting,
Normally Universal, 24Vdc, Auto Reset.
1
19 FP12P-S1-08-32-NU-V-77A-24D-120 ATEX II 2 GD, Ex d IIC T6
2
3 IECEx Ex d IIC T6
12 Watt, Cv 2.5, 10 bar.
FP12P
SCHEMATIC 3/2 NU
R ½" NPT Ports, 3 Way 2 Position, Direct Acting,
Normally Universal, 24Vdc, Manual Reset.
19 FP12P-S1-08-32-NU-V-77A-24D-ML-65
1
2 ATEX II 2 GD, Ex d IIC T6
3 IECEx Ex d IIC T6
6.5 Watt, Cv 2.5, 10 bar.
FP12P
Manual Reset
† Solenoid must be used in conjunction with a correctly matched, Intrinsically Safe (IS) solenoid driver.
The valve installer is responsible for a correct and safe IS system.
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please Quality Assurance
refer to the product catalogue issue list on our web site or All Bifold products are manufactured to a most stringent
is a member of the
6 www.bifold.co.uk contact a member of our sales team.
Selection Table
20
3
ATEX II 2 GD, Ex d IIC T6
2 SJ06-EI-32-NC-00-77A-24D-30 IECEx Ex d IIC T6
1 3.0 Watt, Cv 0.7, 10 bar.
SJ06
Manual Reset ATEX II I GD, Ex ia IIC T6 Ga
SJ06-E5-32-NC-00-78A-370 IECEx Ex ia IIC T6 Ga
370 Ohms, Cv 0.7, 10 bar.
†
21
3
2
ATEX II 2 GD, Ex d IIC T6
S12-E1-32-NC-00-77A-24D-30 IECEx Ex d IIC T6
3.0 Watt, Cv 1.7, 10 bar.
1
S12
ATEX II I GD, Ex ia IIC T6 Ga
IECEx Ex ia IIC T6 Ga
S12-E1-32-NC-00-78A-370
370 Ohms, Cv 1.7, 10 bar. †
† Solenoid must be used in conjunction with a correctly matched, Intrinsically Safe (IS) solenoid driver.
The valve installer is responsible for a correct and safe IS system.
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please Quality Assurance
refer to the product catalogue issue list on our web site or All Bifold products are manufactured to a most stringent
is a member of the
www.bifold.co.uk contact a member of our sales team.
Selection Table
21
3 ATEX II 2 GD, Ex d IIC T6
2
S12-E5-32-NC-00-77A-24D-30 IECEx Ex d IIC T6
1
3.0 Watt, Cv 1.7, 10 bar.
S12
Manual Reset ATEX II I GD, Ex ia IIC T6 Ga
S12-E5-32-NC-00-78A-370 IECEx Ex ia IIC T6 Ga †
370 Ohms, Cv 1.7, 10 bar.
22
3 ATEX II 2 GD, Ex d IIC T6
2
SPR12-E1-32-NU-00-77A-24D-30 IECEx Ex d IIC T6
1
3.0 Watt, Cv 3.0, 10 bar.
SPR12
ATEX II I GD, Ex ia IIC T6 Ga
SPR12-E1-32-NU-00-78A-370 IECEx Ex ia IIC T6 Ga †
370 Ohms, Cv 3.0, 10 bar.
22
3 ATEX II 2 GD, Ex d IIC T6
2
SPR12-E5-32-NU-00-77A-24D-30 IECEx Ex d IIC T6
1
3.0 Watt, Cv 3.0, 10 bar.
SPR12
Manual Reset
ATEX II I GD, Ex ia IIC T6 Ga
SPR12-E5-32-NU-00-78A-370 IECEx Ex ia IIC T6 Ga
370 Ohms, Cv 3.0, 10 bar. †
† Solenoid must be used in conjunction with a correctly matched, Intrinsically Safe (IS) solenoid driver.
The valve installer is responsible for a correct and safe IS system.
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please Quality Assurance
refer to the product catalogue issue list on our web site or All Bifold products are manufactured to a most stringent
is a member of the
8 www.bifold.co.uk contact a member of our sales team.
Overview
Materials of Construction
Solenoid housing and valve manufactured from 316L stainless steel as standard.
Valve seals are supplied in Viton as standard. Alternative elastomers available for extreme conditions and to suit media.
Springs are manufactured from 302S26 & 316S42 stainless steel as standard.
Fasteners are metric A4 18/10 grade stainless steel; equivalent to 316L grade stainless steel.
Technical Data
Operating Performance for FP03P, FP06P, FP10P, FP12P, SJ06, S06, S09, S12 & SPR
Duty cycle 100% continuously rated/energised.
Surge suppression diode is fitted on all Ex d dc solenoid coils as standard.
Response times - pull in <100ms, drop out <70ms.
Solenoid Insulation - Class H.
Pull-in volts to 85% of nominal. (Checked at FAT to be within specified limits to guarantee safety factors).
Maximum volts at 110% of nominal.
Drop-out volts typically 10 - 20% of nominal (higher Volt options for line monitoring). (Checked at FAT to be within
specified limits to guarantee safety factors).
Temperature rating -20ºC to upper limit of solenoid classification (standard). Arctic service option to -60ºC.
IP66 & IP67 Ingress Protection to IEC 60529 and NEMA 4X.
Bifold solenoid valves must be installed, operated and maintained in accordance with the relevant Bifold installation, operating
and maintenance instructions, relevant installation rules, regulations and codes of practice.
Product Options
Certification & Approval options available Certification & Approval options available
for standard 7 series solenoid housing for slimline 5 series solenoid housing
SIL 3, Safety Integrity Level, third party certification to IEC 61508 (Valve models FP03P, FP06P & FP10P. Note: FP03P fitted as
the pilot stage operator on SJ06, S06, S09, S12 & SPR).
Valves can be mounted in any orientation. Solenoids can be rotated relative to the pilot stage valve body to suit cable entry.
Working pressure up to 35 bar. Maximum working pressure according to valve model.
Operating media - Filtered lubricated or unlubricated air, inert gas, sweet (natural) and sour gas options, water,
water glycol mixtures and mineral oil. Maximum viscosity 65 cSt (mm²/s).
For operating temperature range, please see solenoid valve type and seal options.
Higher voltage options available for line monitoring.
Manual Reset, Manual Override and Manual Latch operator options.
Arctic Service options to -60ºC.
These products can be incorporated within our 'AXIS' valve actuator control manifold systems.
See catalogue 03: - AXIS Manifold System.
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please Quality Assurance
refer to the product catalogue issue list on our web site or All Bifold products are manufactured to a most stringent
is a member of the
www.bifold.co.uk contact a member of our sales team.
Certification Details
Certification & Approval Details
Type 74 Solenoid
ATEX, Certificate Number Baseefa 09ATEX0040X. IECEx, Certificate Number IECEx Bas 09.0012X.
II 2 GD c Ex emb IIC T3 Gb Tamb -25ºC to +40ºC. Ex emb IIC T3 Gb Tamb -25ºC to +40ºC.
II 2 GD c Ex emb IIC T3 Gb Tamb -25ºC to +55ºC. Ex emb IIC T3 Gb Tamb -25ºC to +55ºC.
Dual Labelled/Marked
Type 77 Solenoid
ATEX, Certificate Number Baseefa 10ATEX0026. IECEx, Certificate Number IECEx Bas 10.0008.
II 2 GD Ex d IIC T6 (Tamb -60ºC to +40ºC). Ex d IIC T6 (Tamb -60ºC to +40ºC).
II 2 GD Ex d IIC T5 (Tamb -60ºC to +55ºC). Ex d IIC T5 (Tamb -60ºC to +55ºC).
II 2 GD Ex d IIC T4 (Tamb -60ºC to +90ºC). Ex d IIC T4 (Tamb -60ºC to +90ºC).
Dual Labelled/Marked
Type 58 Solenoid
ATEX, Certificate Number Baseefa 08ATEX0292X. IECEx, Certificate Number IECEx Bas 08.0095X.
II 1G Ex ia IIC T6 Ga (-40ºC ≤ Ta ≤ +60ºC). Ex ia IIB T6 Ga (-40ºC ≤ Ta ≤ +60ºC).
Dual Labelled/Marked
Type 78 Solenoid
ATEX, Certificate Number Baseefa 02ATEX0124X. IECEx, Certificate Number IECEx Bas 09.0092X.
II I GD Ex ia IIC T6 Ga (Tamb = -60ºC to +60ºC). Ex ia IIC T6 Ga (Tamb = -60ºC to +60ºC).
II I GD Ex ia IIC T4 Ga (Tamb = -60ºC to +95ºC). Ex ia IIC T4 Ga (Tamb = -60ºC to +95ºC).
Dual Labelled/Marked
Type 77 Solenoid Type 77 Solenoid
CSA (US), Certificate Number 1398692 ATEX, Certificate Number Baseefa 10ATEX0026.
Class 1, Division 1, Groups B, C & D for both II 2 GD Ex d IIC T6 (Tamb -60ºC to +40ºC).
Canada & USA. II 2 GD Ex d IIC T5 (Tamb -60ºC to +55ºC).
Ex d IIC for Canada, AEx d IIC for USA.
T85ºC -60ºC to +40ºC ambient. II 2 GD Ex d IIC T4 (Tamb -60ºC to +90ºC).
T100ºC -60ºC to +55ºC ambient.
T135ºC -60ºC to +90ºC ambient.
Dual Labelled/Marked
Type 58 Solenoid Type 58 Solenoid
INMETRO, Certificate Number CEPEL 12.2125X. GOST, Certificate Number B0015, RTN Permit
BR-Ex ia IIB T6 -40ºC to +60ºC ambient. Number PPC 00-048112
0Ex ia IIC T6 -40ºC to +40ºC ambient.
Type 77 Solenoid 0Ex ia IIC T5 -40ºC to +55ºC ambient.
INMETRO, Certificate Number CEPEL-EX-097/2003X. 0Ex ia IIC T4 -40ºC to +60ºC ambient.
BR-Ex d IIC T6 -60ºC to +40ºC ambient. Type 77 Solenoid
BR-Ex d IIC T5 -60ºC to +55ºC ambient. GOST, Certificate Number B00763, RTN.
BR-Ex d IIC T4 -60ºC to +90ºC ambient. Ex d IIC T6 -60ºC to +40ºC ambient.
Ex d IIC T5 -60ºC to +55ºC ambient.
Type 78 Solenoid Ex d IIC T4 -60ºC to +90ºC ambient.
INMETRO, Certificate Number CEPEL-EX-532/05.
Type 78 Solenoid
BR-Ex ia IIC T6 -60ºC to + 40ºC ambient.
GOST, Certificate Number B00015, RTN.
BR-Ex ia IIC T4 -60ºC to + 95ºC ambient.
Permit Number PPC 00-28504.
Ex ia IIC T6 -60ºC to +40ºC ambient.
Type 87 Solenoid Ex ia IIC T5 -60ºC to +55ºC ambient.
NEPSI, Certificate Number GYJ081011. Ex ia IIC T4 -60ºC to +90ºC ambient.
Ex d IIC T6 up to 40ºC ambient. Type 77 & 78 Solenoid
Ex d IIC T5 up to 55ºC ambient.
Ex d IIC T4 up to 95ºC ambient. GOST K, GGTN K Permit, Kazakhstan,
BIF 7727 2.
Label Rationalisation
The temperature details on our solenoid labels have, to date, been These are in the process of being replaced with a single label which
laid out with a single ambient range and 'T' rating, as follows :- covers all potential temperature parameters.Therefore the label
will for example, read as follows :-
{
77A3 - T4 (-60ºC ≤ Tamb ≤ +90ºC) T4 (-60ºC ≤ Tamb ≤ +90ºC) {
or 77A6 - T5 (-60ºC ≤ Tamb ≤ +55ºC) 77A T5 (-60ºC ≤ Tamb ≤ +55ºC)
or 77A9 - T6 (-60ºC ≤ Tamb ≤ +40ºC) T6 (-60ºC ≤ Tamb ≤ +40ºC)
Please note that operation ambients are dependant upon seal types.
For solenoid type 87 please note that the solenoid housing is fixed.
For solenoid type 74 the maximum permissible ambient temperature is subject to the coil wattage. Please see page 12.
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please Quality Assurance
refer to the product catalogue issue list on our web site or All Bifold products are manufactured to a most stringent
is a member of the
10 www.bifold.co.uk contact a member of our sales team.
Port Connections
Port Connections for
Port Connections (FP03P Only) (FP06P, FP10P, FP12P, SJ06, S06, S09, S12 & SPR)
PORT CONNECTIONS TABLE PORT CONNECTIONS TABLE
Configuration Pressure Service Vent Configuration Pressure Service Vent
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please Quality Assurance
refer to the product catalogue issue list on our web site or All Bifold products are manufactured to a most stringent
is a member of the
www.bifold.co.uk contact a member of our sales team.
Ex emb Options
Options Table 1 74 (Ex emb)
SOLENOID OPTIONS TABLE 1 74 (Ex emb)
Solenoid Typical Power Cable
Product Standard CV Temperature Ingress
Order Apparatus Consumption Entry Certification Options
Type Voltage Rate Range (ºC) Protection
Code Code (W) Connection
Media #
-20ºC to +40ºC
-25ºC to +40ºC
-20ºC to +55ºC
1.8 -25ºC to +55ºC
24 Vdc IP66 M20 x 1.5
Ex emb II Ambient
74 0.1 -25ºC to +40ºC (T3) IP67 (½" NPT ATEX IECEx
T3 -25ºC to +55ºC (T3) NEMA 4X Option)
48 Vdc Media #
-20ºC to +40ºC
3.6 -25ºC to +40ºC
FP03P Ambient
-25ºC to +40ºC (T3)
3.6 0.4
24 Vdc Media #
-20ºC to +40ºC IP66 M20 x 1.5
4.4 0.5 -25ºC to +40ºC IP67 (½" NPT ATEX IECEx
Ambient NEMA 4X Option)
48 Vdc -25ºC to +40ºC (T3)
Ex emb II 6.8 0.75
FP06P
74 T3
3.6 0.4 Media #
24 Vdc -20ºC to +40ºC M20 x 1.5
IP66
-25ºC to +40ºC (½" NPT
4.4 0.5 IP67 ATEX IECEx
Ambient NEMA 4X Option)
48 Vdc -25ºC to +40ºC (T3)
6.8 0.75
FP10P
Media #
-20ºC to +40ºC
-25ºC to +40ºC
1.8 -20ºC to +55ºC
0.7 -25ºC to +55ºC
24 Vdc Ambient IP66 M20 x 1.5
-25ºC to +40ºC (T3) IP67 (½" NPT
-25ºC to +55ºC (T3) ATEX IECEx
Media # NEMA 4X Option)
48 Vdc
-20ºC to +40ºC
3.6 0.7 -25ºC to +40ºC
SJ06 Ambient
Ex emb II -25ºC to +40ºC (T3)
74 T3 Media #
-20ºC to +40ºC
1.0 (S06) -25ºC to +40ºC
1.8 -20ºC to +55ºC
1.7 (S09) -25ºC to +55ºC
24 Vdc Ambient M20 x 1.5
1.7 (S12) IP66
-25ºC to +40ºC (T3) IP67 (½" NPT ATEX IECEx
-25ºC to +55ºC (T3)
NEMA 4X Option)
48 Vdc 1.0 (S06) Media #
-20ºC to +40ºC
3.6 1.7 (S09) -25ºC to +40ºC
S06, S09 & S12 Ambient
1.7 (S12) -25ºC to +40ºC (T3)
Media #
-20ºC to +40ºC
-25ºC to +40ºC
-20ºC to +55ºC
1.8 3.0 -25ºC to +55ºC
24 Vdc
Ex emb II Ambient
74 -25ºC to +40ºC (T3) IP66 M20 x 1.5
T3 -25ºC to +55ºC (T3)
IP67 (½" NPT ATEX IECEx
48 Vdc
NEMA 4X Option)
SPR Media #
3.0 -20ºC to +40ºC
3.6 -25ºC to +40ºC
Ambient
-25ºC to +40ºC (T3)
Ex d Options
Options Table 2 77 (Ex d)
SOLENOID OPTIONS TABLE 2 77 (Ex d)
Solenoid Typical Power Temperature Cable
Product Standard CV Ingress
Order Apparatus Consumption Range (ºC) Entry Certification Options
Type Voltage Rate Protection
Code * Code (W) Media Ambient Connection
12 Vdc ATEX IECEx
Media #
24 Vdc 1.5 ~ -20ºC to +90ºC (T4) INMETRO
48 Vdc -60ºC to +90ºC (T4) IP66 M20 x 1.5 GOST
Ex d IIC 110 Vdc
77 0.1 IP67 (½" NPT GOST K GGTN
T6, T5 Ambient
Option)
or T4 110 Vac -60ºC to +40ºC (T6) NEMA 4X CSA (C, US)
240 Vac 3.0 -60ºC to +55ºC (T5) NEPSI
50 or 60 Hz -60ºC to +90ºC (T4)
*
FP03P PESO
12 Vdc Media # ATEX IECEx
24 Vdc 3.5 0.5 -20ºC to +90ºC (T4) INMETRO
48 Vdc -60ºC to +90ºC (T4) GOST
110 Vdc IP66 M20 x 1.5
Ambient IP67 (½" NPT GOST K GGTN
110 Vac -60ºC to +40ºC (T6) NEMA 4X Option) CSA (C, US)
240 Vac 5.7 0.75 -60ºC to +55ºC (T5)
Ex d IIC * NEPSI
FP06P 50 or 60 Hz -60ºC to +90ºC (T4)
77 T6, T5 PESO
or T4 ATEX IECEx
24 Vdc Media #
48 Vdc 3.5 0.5 -20ºC to +90ºC (T4) INMETRO
110Vdc -60ºC to +90ºC (T4) IP66 M20 x 1.5 GOST
Ambient IP67 (½" NPT GOST K GGTN
110 Vac -60ºC to +40ºC (T6) NEMA 4X Option) CSA (C, US)
240 Vac 5.7 0.75 -60ºC to +55ºC (T5) NEPSI
50 or 60 Hz -60ºC to +90ºC (T4) *
FP10P PESO
For detailed information on certification please see page 10. * For China (NEPSI), please note that the solenoid operator is Type 87.
Other wattages available upon request. ~ Non standard low power option.
# Permissible media operating temperatures are dependent upon the selected O-Ring material. Please refer to the product selection charts on pages 15 to 22.
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please Quality Assurance
refer to the product catalogue issue list on our web site or All Bifold products are manufactured to a most stringent
is a member of the
www.bifold.co.uk contact a member of our sales team.
Ex ia Options
Options Table 3 58 & 78 (Ex ia)
Solenoid
Typical Cable
Product Order CV Temperature Ingress
Apparatus Entry Certification Options
Type Code Rate Range Protection
Code Connection
Media #
-20ºC to +95ºC
-60ºC to +95ºC ATEX IECEx
Ex ia IIC IP66 M20 x 1.5 INMETRO
58 † 0.5
T6 Ambient GOST
-40ºC to +60ºC
FP06P
Media #
-20ºC to +95ºC
IP66 M20 x 1.5 ATEX IECEx
-60ºC to +95ºC
Ex ia IIC IP67 (½" NPT INMETRO
78 † T6 or T4 0.1 Ambient NEMA 4X Option) GOST
-60ºC to +60ºC (T6) GOST K GGTN
-60ºC to +95ºC (T4)
FP03P
Media #
-20ºC to +95ºC ATEX IECEx
-60ºC to +95ºC IP66 M20 x 1.5 INMETRO
78 † Ex ia IIC IP67 (½" NPT
0.7 GOST
T6 or T4 Ambient NEMA 4X Option)
GOST K GGTN
-60ºC to +60ºC (T6)
-60ºC to +95ºC (T4)
SJ06
Media #
-20ºC to +95ºC ATEX IECEx
1.0 (S06) -60ºC to +95ºC IP66 M20 x 1.5
Ex ia IIC INMETRO
78 † 1.7 (S09) IP67 (½" NPT
T6 or T4 Ambient GOST
NEMA 4X Option)
1.7 (S12) -60ºC to +60ºC (T6) GOST K GGTN
-60ºC to +95ºC (T4)
S06, S09 & S12
Media #
-20ºC to +95ºC ATEX IECEx
IP66 M20 x 1.5
Ex ia IIC -60ºC to +95ºC INMETRO
3.0 IP67 (½" NPT
78 † T6 or T4 GOST
Ambient NEMA 4X Option)
GOST K GGTN
-60ºC to +60ºC (T6)
SPR -60ºC to +95ºC (T4)
FP03P
Dimensional Drawing
68 86.5 SCHEMATIC 3/2 NC Wiring Diagrams
34 50 74 SOLENOID
(EExemb)
TYPE ‘M’ RED +
OVERRIDE
WINDING
OPTION 1
2
BLACK -
3
WINDING
SCHEMATIC 2/2 NC
M20 x 1.5P SOLENOID
CASE
CABLE ENTRY
180.1
AC VOLTAGE
155.4
EXTERNAL 77 SOLENOID
EARTH STUD (EExd)
1
124.6
2
CONNECTIONS AREBI-POLAR
3 WINDING
SOLENOID
CASE
1
50.5
MOUNTING POSITIONS RED + BLACK -
2 x Ø5.5 THRO' HOLES 2
37.1
26.2
DC VOLTAGE
3
25
78 SOLENOID
= =
Normally Closed (EExia)
28 5 function. (Plugs
RED +
38.1 q available as a line
item). BLACK -
FP06P
Dimensional Drawing
68 86.5 SCHEMATIC 3/2 NU
34 50
SCHEMATIC 2/2 NC
M20 x 1.5P Valve suitable for
CABLE ENTRY
Universal operation
2/2 & 3/2.
191
1
166.5
3
Plug port 3 for 2/2
1
Normally Closed
SCHEMATIC 2/2 NO function. (Plugs
MOUNTING POSITIONS
61.5
3
item).
33.5
33.5
22
17.5
FP06P
Dimensional Drawing
SCHEMATIC 3/2 NU
NU Normally
Universal offered
187.5
1
2 as standard.
3
MOUNTING HOLES Ø5,5 THRO'
PORT 1
PORT 2
46.5
PORT 3
33.5
33.5
17.5
22
16 25.4
32
58(Ex ia)
A ATEX/IECEx Dual Certified/Labelled
G GOST
I INMETRO
Solenoid Approval
N NEPSI x
U CSA (US) ATEX Dual Certified/Labelled x
M Electrical to switch or temporary manual override
ML Electrical and manual required to latch or temporary Options
FP10P
Dimensional Drawing
SCHEMATIC 3/2 NU
68 86.5
34 50
NU Normally
TYPE ‘M’
OVERRIDE
Universal offered
OPTION 1 as standard.
2
3
SCHEMATIC 2/2 NC
Valve suitable for
M20 x 1.05P Universal operation
CABLE ENTRY
2/2 & 3/2.
Normally Open and
191
1
2
166.5
Normally Closed
1 SCHEMATIC 2/2 NO function. (Plugs
2 available as a line
MOUNTING POSITIONS
61.5
2 x M6 x 9.5 DP item).
47.8
46.5
3
Plug port 1 for 2/2
35.9
20.8
17.8
1 Normally Open
2 function. (Plugs
= =
44.45 q
3 available as a line
Body Ported Shown item).
FP12P
Dimensional Drawing
SCHEMATIC 3/2 NU
68 86.5
34 50
SCHEMATIC 2/2 NC
M20 x 1.5P
CONDUIT ENTRY Valve suitable for
universal operation
EXTERNAL
2/2 & 3/2.
225.5
EARTH STUD
1 Normally Open and
200.8
2
MOUNTING POSITIONS
Normally Closed.
170
2 x M6 x 10 DP
3
Plug port 3 for 2/2
1 Normally Closed
SCHEMATIC 2/2 NO function. (Plugs
96
2
available as a line
67
61
3
item).
43.8
26.5
19.5
Plug port 1 for 2/2
1 Normally Open
27.8 8.5
2 function. (Plugs
44.45 q 3 available as a line
102.8
item).
SJ06
Dimensional Drawing
68 86.5
SCHEMATIC 3/2 NC
34 50
TYPE ‘M’ T
OVERRIDE
OPTION
3
2
M20 x 1.5P 1
CABLE ENTRY EXTERNAL
EARTH STUD
19
221.3
MOUNTING POSITIONS
2 x Ø5.5 THRO' HOLES
196.6
SCHEMATIC 3/2 NO
165.8
=
28
=
T
VIEW OF DETAIL 'A'
1/8" NPT 31.4
PILOT VENT
DETAIL A
59.5
1 2 3
3
2
15
38.1 31.4
48 1
93.5
E1 Internal Pilot - Auto Reset E13 Internal Pilot electrical and manual required to
E2 External Pilot - Auto Reset latch - tamperproof
E3 Manual Override - Electrical to switch E14 External Pilot electrical and manual required to
OR temporary manual override latch - tamperproof Primary Actuator
E4 External Pilot - Manual Override E15 Internal Pilot Manual Override Rotary - Electrical
E5 Manual reset - Electrical AND manual required to switch OR temporary manual override
to latch OR temporary manual override E16 External Pilot Manual Override Rotary - Electrical
E6 External Pilot - Manual Reset to switch OR temporary manual override
32 3-way, 2-position
NC Normally closed Valve Configuration
NO Normally open
00 Spring return end cap 03 Spring cap with mechanical latch
02 Spring cap with E1 Internal Pilot Secondary Actuator
microswitch plunger
XX Refer to Solenoid options tables. 74 (Ex emb) Page 12 - Table 1
77 (Ex d) Page 13- Table 2 Solenoid *
78 (Ex ia) Page 14 - Table 3 **
68 86.5
50
T
34
TYPE ‘M’
OVERRIDE
OPTION
3
2
MOUNTING POSITIONS
3 x Ø5.2 THRO' HOLES SCHEMATIC 3/2 NO
187.9
157.1
=
38
T
=
52.2
DETAIL A 1 2 3
3
36.3 2
50.8 52.2
67.4
125.3 1
SPR
Dimensional Drawing
86.5 180
50 155.4
124.6
SCHEMATIC 3/2 NU
TYPE ‘M’
OVERRIDE
OPTION
EXTERNAL
M20 x 1.5P
162.2
2 x M5 x 9 DP
84.7
77.7
1
61.2
1
44.7
37.7
= =
24
38.1 96.5
DETAIL A
Options
Product Options
The range of products displayed in this brochure, are designed to accommodate all the options shown below. If the style
or arrangement required for your application is not shown, please contact our office with full description and specification
details.
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please Quality Assurance
refer to the product catalogue issue list on our web site or All Bifold products are manufactured to a most stringent
is a member of the
www.bifold.co.uk contact a member of our sales team.
Options
Product Options for Type 58
The range of products displayed in this brochure, are designed to accommodate all the options shown below. If the style
or arrangement required for your application is not shown, please contact our office with full description and specification
details.
The solenoid valve switches on and off with the electrical supply. The manual override button can be pressed to operate the
valve when the solenoid is in the electrically de-energised position. The manual override is non-detented, i.e. does not latch
in position. When the button is released, the valve spring returns.
For Type ML, apply the electrical signal and press the reset button. The valve moves to the energised position and will not
de-energise until the electrical supply is removed. The manual reset button also acts as a manual override, when the valve is
in the de-energised position and the electrical supply is off. The manual reset is non-detented, spring return, i.e. does not latch
in position.
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please Quality Assurance
refer to the product catalogue issue list on our web site or All Bifold products are manufactured to a most stringent
is a member of the
24 www.bifold.co.uk contact a member of our sales team.
Solenoid Valves
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please Quality Assurance
refer to the product catalogue issue list on our web site or All Bifold products are manufactured to a most stringent
is a member of the
www.bifold.co.uk contact a member of our sales team.
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please Quality Assurance
refer to the product catalogue issue list on our web site or All Bifold products are manufactured to a most stringent
is a member of the
26 www.bifold.co.uk contact a member of our sales team.
Accuracy of information
We take care to ensure that product information in this
catalogue is reasonably accurate and up-to-date. However,
our products are continually developed and updated
so to ensure accurate and up-to-date information please Quality Assurance
refer to the product catalogue issue list on our web site or All Bifold products are manufactured to a most stringent
is a member of the
www.bifold.co.uk contact a member of our sales team.
Pneumatic and
Instrumentation Valves
Hydraulic Valves
Subsea Valves
Hydraulic Pumps,
Intensifiers and Valves
Quality Assurance
All Bifold products are manufactured to a most stringent
Accuracy of Information QA programme. Every care is taken at all stages of
We take care to ensure that product information in this manufacture to ensure that every product will give When selecting a product, the applicable operating
catalogue is reasonably accurate and up-to-date. However, optimum performance and reliability. We are third system design must be considered to ensure safe use.
our products are continually developed and updated so to party certified to BS EN ISO 9001:2008. Functional test The products function, material compatibility, adequate
ensure accurate and up-to-date information please refer to certificate, letter of conformity and copies of original mill ratings, correct installation, operation, and maintenance
the product catalogue issue list on our web site or contact certificates, providing total traceability are available on are the responsibilities of the system designer and user.
a member of our sales team. request to BS EN 10204 3.1 where available. We reserve
the right to make changes to the specifications and
design etc., without prior notice.