Professional Documents
Culture Documents
Lab
Lab Report 1
Roll # 3462-Mech
SECTION E
CLASS # 166
TITLE
OBJECTIVES
APPARATUS DESCRIPTION
PROCEDURE
FIGURE/DIAGRAM/SNAPS
To study the main parts of Hydraulic Bench.
Objectives
To study the main parts of hydraulic bench and to know about its
function in fluid lab.
Apparatus Description
HYDRAULIC BENCH
The Hydraulic Bench Apparatus comprises of a self-contained, water re-
circulating unit provided with a top tray and a sump tank and is mounted
on wheels. Various Hydraulic experiments can be conducted on this
setup. A Centrifugal Pump is fitted for water circulation. Flow control
valve and by-pass valve are fitted in water line to conduct the
experiment on different flow rates. Flow rate of water is measured with
the help of measuring tank and stop watch. Water collected on the top
tray from experimental setup, drains and return to sump tank.
The Following Experiments Can Be Carried Out With Common Basic
Table with Separate Experimental Setup which Can Be Connected To
Hydraulic Bench with Flexible Pipe
Centrifugal Pump
Connector
Open Channel
Volume Measuring Tank
Dump Valve
Sump Tank
Sump Tank Capacity = 150mlit
Speed of Centrifugal Pump = 2800rev/min
Total Head = 20m
Figures