Professional Documents
Culture Documents
Constructing Enterprise-Level Routing Networks PDF
Constructing Enterprise-Level Routing Networks PDF
We guarantee you can pass any IT certification exam at your first attempt with just 10-12
hours study of our guides.
Our study guides contain actual exam questions, you will get word to word same on your
actual test; accurate answers with detailed explanation verified by experts and all graphics
and drag-n-drop exhibits shown just as on the real test.
To test the quality of our guides, you can download the one-fourth portion of any guide from
http://www.certificationking.com absolutely free.
Besides, we also offer complete version of following exams absolutely free. You can start
your certification from these free guides and if you are satisfied you can buy the rest
♦ Microsoft: 70-270, 70-305 ♦ Cisco: 642-901 ♦ Oracle: 1Z0-007, 200 ♦ CompTIA: 220-601
♦ SUN: 310-014, 310-044 ♦ Citrix: 1Y0-A01, 1Y0-256 ♦ CIW: 1D0-420 ♦ Novell: 50-686
♦ Adobe: 9A0-029 ♦ Apple: 9L0-005, 9L0-505 ♦ Avaya: 132-S-100 ♦ Cognos: COG-105
♦ CWNP: PW0-100 ♦ EMC: E20-001 ♦ Hyperion: 4H0-002 ♦ HP: HP0-771, HP0-J24
♦ IBM: 000-253, 000-700 ♦ Juniper: JN0-100, JN0-201 ♦ Lotus: LOT-739
♦ Nortel: 920-803 ♦ SAS: A00-201 ♦ SNIA: S10-100 ♦ Sybase: 510-015
♦ Symantec: 250-101 ♦ TeraData: NR0-011
For other payment options and any further query, feel free to mail us at
info@certificationking.com
Huawei GB0-280: Practice Exam
QUESTION NO: 1
Why average length of the queue is adopted to check the length of the queue in WRED? ( )
A. The average length of the queue is related with the types of the supported services.
B. Comparing the queue length (the absolute length of the queue) with the thresholds before
dropping the packet will lead to unfairness to the burst traffic, which is disadvantageous to traffic
transportation.
C. Average Queue can balance the resource seizure.
D. Because the queue length can not be calculated directly.
Answer: B
QUESTION NO: 2
Which are the right one/ones about OSPF among the following descriptions? ( )
Answer: A,B,C,D,F,G
QUESTION NO: 3
Which of the following are right about the standard access list and the extended access list when
they being used in the route filtering ? ( )
A. Standard Access List is to match the destination segment address or the next hop of the route.
B. Extended Access List is to match its destination address field with the destination segment
address field.
C. Extended Access List is to match its source address field with the source segment address field
of the route.
D. Extended Access List is to match its source address field with the destination segment address
field of the route.
Answer: A,D
www.CertificationKing.com 2
Huawei GB0-280: Practice Exam
QUESTION NO: 4
When a route is imported to the RIP routing protocol, if no metric is specified, which of the
following will be taken as the default? ( )
A. 255
B. 254
C. 15
D. 16
Answer: D
QUESTION NO: 5
Answer: D
QUESTION NO: 6
According to the OSPF protocol, the Router ID must be unique in the AS internal. Because the
Router LSA only performs intra-area propagation, even there are two intra-area routers, belonging
to two different areas though, with the same Router ID, it will result in no calculating errors. ( )
A. False
B. True
Answer: A
QUESTION NO: 7
which of the following are the right description to the partition of areas: ( )
www.CertificationKing.com 3
Huawei GB0-280: Practice Exam
B. it is disadvantageous to the route summarization.
C. To reduce the scale of the LSDB
D. To mitigate the operating complexity of the SPF algorithm.
Answer: A,C,D
QUESTION NO: 8
Answer: A,C
QUESTION NO: 9
A. Local-Preference is of native for the AS. It is meant for exchange between IBGP peers, and will
not be sent to EBGP peers.
B. The Update packet between the IBGP peers must contain Local-Preference; otherwise the
system will report error and interrupt the connection.
C. The Update packet between the IBGP peers does not have to contain Local- Preference.
D. Local-preference is to help the router in AS internal choose a more appropriate egress to the
AS external.
Answer: A,B,D
QUESTION NO: 10
Which of the following are the wrong description to the BGP route attributes? ( )
A. Mandatory attributes refer to the essential attribute of each route, such as the next hop; while
the optional can be omitted.
B. The router should propagate the attribute to other peers when it receives a transitional attribute,
such as metric.
C. Local-preference is for the route to reach the destination with priority in the AS internal.
D. Community identifies a group of routers with the same attributes. It has something to do with
the AS, but nothing with the IP subnet.
www.CertificationKing.com 4
Huawei GB0-280: Practice Exam
Answer: B,D
QUESTION NO: 11
What is the maximum PQs (Priority Queues) that the Quidway series routers can create? ( )
A. 8
B. 2
C. 6
D. 4
Answer: D
QUESTION NO: 12
A. Extranet VPN
B. Access VPN
C. Intranet VPN
D. Client initiated VPN
Answer: A,B,C
QUESTION NO: 13
A. 70
B. null (which means locally originated route)
C. 7000
D. 700
E. 701
Answer: A,C,D,E
QUESTION NO: 14
Why average length of the queue is adopted to check the length of the queue in WRED? ( )
www.CertificationKing.com 5
Huawei GB0-280: Practice Exam
A. The average length of the queue is related with the types of the supported services.
B. Because the queue length can not be calculated directly.
C. Comparing the queue length (the absolute length of the queue) with the thresholds before
dropping the packet will lead to unfairness to the burst traffic, which is disadvantageous to traffic
transportation.
D. Average Queue can balance the resource seizure.
Answer: C
QUESTION NO: 15
Specify an interface of a router to Area 2. Which of the following are right commands to do it? ( )
Answer: A,B,D
QUESTION NO: 16
Bi-directional Import refers to that routes are imported mutually between routing protocols. To
prevent route loop, you can ( )
Answer: A,B,D
QUESTION NO: 17
A. summary bgp...
B. aggregate X.X.X.X ...
C. aggregate
D. area..range
www.CertificationKing.com 6
Huawei GB0-280: Practice Exam
Answer: B
QUESTION NO: 18
Which of the following are right about the relation between the route-policy and the filter? ( )
Answer: A,B,C,D
QUESTION NO: 19
Which of the following are right description to the authentication between the RADIUS client and
server when a PPP user dials in? ( )
A. If PAP is adopted, the password will be transmitted in cipher text between the client and the
server.
B. If CHAP is adopted, the password will be transmitted in plaintext between the client and the
server.
C. If PAP is adopted, the password will be transmitted in plaintext between the client and the
server.
D. If CHAP is adopted, the password will be transmitted in cipher text between the client and the
server.
Answer: C,D
QUESTION NO: 20
The right procedure for the OSPF protocol to calculate the route is ( )
www.CertificationKing.com 7
Huawei GB0-280: Practice Exam
H. A-B-C-D
Answer: A
QUESTION NO: 21
If you want to modify the precedence of the packet from Ethernet 0 on a Quidway router to 7,
which command should you use?
A. qos car outbound any cir 8000 cbs 15000 ebs 0 conform remark-prec-pass 7 exceed remark-
prec-pass 7
B. qos car outbound any cir 8000 cbs 15000 ebs 0 conform remark-prec-pass 7 exceed remark-
prec-continue 7
C. qos car outbound any cir 8000 cbs 15000 ebs 0 conform remark-prec-pass 7 exceed remark-
prec-pass drop
D. qos car inbound any cir 8000 cbs 15000 ebs 0 conform remark-prec-pass 7 exceed remark-
prec-pass 7
Answer: A
QUESTION NO: 22
The Origin attribute of the route imported in BGP through the network command is EGP. ( )
A. False
B. True
Answer: A
QUESTION NO: 23
Which is the port number when BGP transmits the route with TCP at the transport layer? ( )
A. 89
B. 520
C. 179
D. 180
Answer: C
www.CertificationKing.com 8
Huawei GB0-280: Practice Exam
QUESTION NO: 24
Which of the following are right about the UPDATE packet in the BGP routing protocol? ( )
A. A packet can notify multiple unreachable routes at the same time, which has nothing to do with
the path attributes.
B. The Update packet is to update the route.
C. A packet can notify multiple routes at the same time, but their path attributes must be the same.
D. A packet can notify multiple routes at the same time, and their path attributes can be different.
Answer: A,B,C
QUESTION NO: 25
Two routers running OSPF are connected via a point-to-point link. During the two hours after the
Link State Databases have been synchronized, (The peer state machine is in the full state.) if any
changes happened to the network routing information, which kinds of packets are being
transferred over the link? ( )
Answer: A,B,D
QUESTION NO: 26
When a route is imported to the RIP routing protocol, if no metric is specified, which of the
following will be taken as the default? ( )
A. 15
B. 254
C. 255
D. 16
Answer: D
QUESTION NO: 27
www.CertificationKing.com 9
Huawei GB0-280: Practice Exam
In the OSPF protocol, the LSR packet is to ( )
Answer: B
QUESTION NO: 28
For a given destination address, the router checks the routing table to see whether there is a
matching item. Which of the following is the matching rule? ( )
A. Combine the destination address segment and the mask of a table item by AND, and then
combine the mask with the given destination address by AND, last compare whether the two
combinations are equal.
B. Combine the destination address segment and the mask of a table item by AND, and then
compare the combination with the other combination of the given destination address segment
and the destination address by AND to see whether they are equivalent.
C. Combine the destination address segment and the mask of a table item by OR, and then
combine the mask with the given destination address by OR, last compare whether the two
combinations are equal.
D. Combine the destination address segment and the mask of a table item by OR, and then
compare the combination with the other combination of the given destination address segment
and the destination address by OR to see whether they are equivalent.
Answer: A
QUESTION NO: 29
Which is the meaning of the aggregate 10.110.0.0 255.255.0.0 origin-policy MAP1 command? ( )
Answer: A
www.CertificationKing.com 10
Huawei GB0-280: Practice Exam
QUESTION NO: 30
BGP decides the routing policy according to the route attribute as follows:
Which of the following is the correct order if arranged from high priority to low priority? ( )
A. ADECB
B. ADCBE
C. ABCDE
D. CDEAB
E. ADEBC
Answer: E
QUESTION NO: 31
A. When BGP gets the route from a peer, it does not always add the route to the IP routing table.
B. BGP peers learn the same route information.
C. None of the above
D. BGP forwards the route from the peers to all other peers.
Answer: A
QUESTION NO: 32
A. EBGP is adopted between the sub-ASs, the confederation itself and the AS external.
B. Such important information as the next hop, MED and Local-Preference will not lose when
traversing the sub-AS.
C. The confederation can easily detect the route loop in the AS.
D. It partitions an AS into several sub-ASs. The IBGP peer in the sub-AS fully connects to each
other, and meanwhile connects to other sub-ASs.
www.CertificationKing.com 11
Huawei GB0-280: Practice Exam
Answer: A,B,C,D
QUESTION NO: 33
Because Local-Preference is not transmitted between the AS, it will not be transmitted between
the sub-ASs in an federation. ( )
A. False
B. True
Answer: A
QUESTION NO: 34
For a given destination address, the router checks the routing table to see whether there is a
matching item. Which of the following is the matching rule? ( )
A. Combine the destination address segment and the mask of a table item by OR, and then
compare the combination with the other combination of the given destination address segment
and the destination address by OR to see whether they are equivalent.
B. Combine the destination address segment and the mask of a table item by OR, and then
combine the mask with the given destination address by OR, last compare whether the two
combinations are equal.
C. Combine the destination address segment and the mask of a table item by AND, and then
compare the combination with the other combination of the given destination address segment
and the destination address by AND to see whether they are equivalent.
D. Combine the destination address segment and the mask of a table item by AND, and then
combine the mask with the given destination address by AND, last compare whether the two
combinations are equal.
Answer: D
QUESTION NO: 35
www.CertificationKing.com 12
Huawei GB0-280: Practice Exam
Answer: B
QUESTION NO: 36
Which of the following are right about the ACL rule in the IPSEC? ( )
Answer: A,B,C
QUESTION NO: 37
Answer: D
QUESTION NO: 38
A. The model of Request/Response is adopted, and the request is originated by the client end.
B. The transmission protocol between the client and the server is TCP.
C. The password is encrypted with MD5 algorithm.
D. The transmission protocol between the client and the server is UDP.
Answer: A,C,D
QUESTION NO: 39
www.CertificationKing.com 13
Huawei GB0-280: Practice Exam
Which are right about the relation between IPSec and IKE? ( )
A. IPSEC uses the security association established by IKE to perform IP packet encryption or
authentication.
B. IKE uses the encrypted Hash algorithm to ensure integrity and authenticity of the packet for
IPSec.
C. IKE negotiates and establishes a security association for IPSEC, and then transfers the
specified parameter and encryption key to IPSEC.
D. IKE is an application layer protocol over UDP, and a signaling protocol for IPSEC.
Answer: A,C,D
QUESTION NO: 40
Answer: F
QUESTION NO: 41
In the OSPF protocol, which of the following belong to the default NBMA network types ( )
A. Ethernet
B. X.25
C. PPP
D. Frame relay
E. ATM
Answer: B,D,E
QUESTION NO: 42
www.CertificationKing.com 14
Huawei GB0-280: Practice Exam
A. access list(acl)
B. ip-prefix
C. aspath-list
D. community-list
E. route-policy
Answer: C,D
QUESTION NO: 43
A. Extranet VPN
B. Client initiated VPN
C. Intranet VPN
D. Access VPN
Answer: A,C,D
QUESTION NO: 44
In Quidway series routers, to check the statistics and the specification for PQ over Ethernet 0,
which of the following command you can use? ( )
Answer: D
QUESTION NO: 45
The differences between the NBMA and the point-to-multipoint network are ( )
A. It is required to elect the DR and BDR in NBMA, but not required in point-to-multipoint.
B. NBMA dispatches the protocol packet in unicast, therefore, it is necessary to specify the peers
manually. Whereas the point-to-multipoint network is optional, it can dispatch the packet in
unicast, and in multicast.
C. The point-to-multipoint network is a default network type; whereas NBMA is not.
D. In the OSPF protocol, NBMA refers to the fully connected Non-Broadcast Multicast network;
while the point-to-multipoint network is not necessarily to be fully connected.
www.CertificationKing.com 15
Huawei GB0-280: Practice Exam
Answer: A,B,D
QUESTION NO: 46
In what ways that the Differentiated Service varies from the Integrated Service? ( )
A. In the Differentiated Service, packets from different sources get different services.
B. The Differentiated Service is fit for backbone network.
C. The Differentiated Service does not require signaling protocol.
D. The Differentiated Service does not have to maintain the soft-state for each flow as the
integrated Service does.
E. In the Differentiated Service, packets to different destinations get different services.
Answer: B,C,D
QUESTION NO: 47
Answer: A
QUESTION NO: 48
Answer: A,B,C,E
www.CertificationKing.com 16
Huawei GB0-280: Practice Exam
QUESTION NO: 49
A. Multiple
B. 1
C. 2
D. 3
Answer: A
QUESTION NO: 50
Which of the following are right about the ACL rule in the IPSEC? ( )
Answer: A,B,C
QUESTION NO: 51
Answer: B,C,D
QUESTION NO: 52
A. The route under penalty will not be notified until it disappears from the routing table.
B. When there is route flapping, the Update packet will be advertised repeatedly in the network.
C. BGP route dampening is caused by the un-stability of the route.
D. The penalty of route flapping becomes heavier with time going.
www.CertificationKing.com 17
Huawei GB0-280: Practice Exam
Answer: B,C
QUESTION NO: 53
Which of the following is the necessary configuration to enable a router running OSPF to advertise
the route to other routers via the frame relay network? ( )
A. Use InARP
B. Manually specify peers
C. Specify the conversion from the IP address to the DLCI address with map
D. Map the X.121 address
Answer: B
QUESTION NO: 54
Why average length of the queue is adopted to check the length of the queue in WRED? ( )
A. Comparing the queue length (the absolute length of the queue) with the thresholds before
dropping the packet will lead to unfairness to the burst traffic, which is disadvantageous to traffic
transportation.
B. Average Queue can balance the resource seizure.
C. Because the queue length can not be calculated directly.
D. The average length of the queue is related with the types of the supported services.
Answer: A
QUESTION NO: 55
Two routers, RTA and RTB are connected to each other by a link via their serial 0. The link
protocol is PPP, and the network type over the two interfaces is Point-to-Point. The interfaces and
the link are all up. Specify the network segment as the following:
www.CertificationKing.com 18
Huawei GB0-280: Practice Exam
[RTA] display ospf peer
A. TWO WAY
B. DOWN
C. ATTEMP
D. FULL
Answer: D
QUESTION NO: 56
Which of the following are the right description to the LSA propagation? ( )
A. Network Summary LSA (Type = 3) propagates only in the related areas, which are the area to
which the ABR that produced the LSA belongs.
B. Router LSA (Type = 1) propagates only in its native area. The foreign Router LSA from other
areas will not appear in the native area;
C. Network LSA (Type = 2) propagates only in the area defined in its content. Foreign Network
LSAs will not appear in the native area.
D. AS External LSA(Type = 5) propagates in the whole AS internal except the Stub area.
E. ASBR Summary LSA(Type = 4) propagates in the whole AS internal except the Stub area.
Answer: A,B,C,D
QUESTION NO: 57
Which of the following describe the function of the command ppp authentication [pap | chap]
scheme default ? ( )
Answer: B,C,D
QUESTION NO: 58
www.CertificationKing.com 19
Huawei GB0-280: Practice Exam
A. BGP is a distance vector protocol, for its packet contains the number of the hops
B. All distance vector protocols support Classless Inter-Domain Routing (CIDR)
C. What the link state protocol exchanges is the link state; while what the distance vector protocol
exchange are the reachable information of the destination prefix and some related vectors.
Answer: C
QUESTION NO: 59
A. Fast mode
B. Transmission mode
C. Tunnel mode
D. Primary mode
Answer: B,C
QUESTION NO: 60
Answer: D
QUESTION NO: 61
Answer: A,B,D
www.CertificationKing.com 20
Huawei GB0-280: Practice Exam
QUESTION NO: 62
A. aaa enable-mode
B. enable aaa
C. By default, AAA has been enabled.
D. aaa-enable
Answer: D
QUESTION NO: 63
Which of the following are right description to the configuration of OSPF over an interface? ( )
A. When the link layer protocol is Frame Relay, X.25 or ATM, OSPF takes the network as Point-to-
Multipoint by default.
B. When the link layer protocol is Ethernet, OSPF takes the network as Broadcast by default.
C. No link layer protocol will be regarded as Point-to-Multipoint by default. If the NBMA network is
not full-meshed, you should change the network type to Point-to-Multipoint manually.
D. When the link layer protocol is PPP, OSPF takes the network as Point-to-Point by default.
Answer: B,C,D
QUESTION NO: 64
A. 70
B. 701
C. 7000
D. 700
Answer: B,C,D
QUESTION NO: 65
www.CertificationKing.com 21
Huawei GB0-280: Practice Exam
A. 7000
B. 701
C. 70
D. 700
Answer: A,B,D
QUESTION NO: 66
Answer: B
QUESTION NO: 67
A. LAC
B. RADIUS Server
C. Tunnel
D. LNS
Answer: A,D
QUESTION NO: 68
A. Input packets
B. Output packets
C. Input/Output bytes
D. Session duration
Answer: A,B,C,D
www.CertificationKing.com 22
Huawei GB0-280: Practice Exam
QUESTION NO: 69
Answer: B,C,D
QUESTION NO: 70
A. If the length of the queue is smaller than the lower threshold, do not drop out the packet.
B. The average length of the queue is adopted when comparing the queue length to the lower and
upper thresholds during packet dropping.
C. If the length of the queue is greater than the upper bound, drop all newly arrived packets.
D. When the length of the queue is between the upper threshold and the lower threshold, WRED
begins to drop out the packet at random. The longer the queue is, the higher the drop-out
probability is.
Answer: A,B,C,D
QUESTION NO: 71
The queue policy and congestion avoidance policy for Best-Effort are: ( )
Answer: A
QUESTION NO: 72
www.CertificationKing.com 23
Huawei GB0-280: Practice Exam
A. Import the static route to the BGP routing table
B. Import the route learned from the IBGP to the BGP routing table
C. Import the route learned from the EBGP to the BGP routing table
D. Semi-dynamically import the route discovered by the IGP into the BGP routing table through the
Network command
E. Dynamically import the route discovered by the IGP into the BGP routing table through the
import-route command
Answer: A,D,E
QUESTION NO: 73
Answer: A,B
QUESTION NO: 74
A. It provides authentication to the data source to guarantee the authenticity of the packet sender.
B. Under transmission mode, the AH protocol authenticates the data in the IP packet, and the
invariant part of the IP header.
C. Under the tunnel mode, the AH protocol authenticates the entire internal of the IP packet, and
the invariant part of the IP header.
D. It adopts an encrypted Hash algorithm to calculate the summary of the protected data. In this
way, it prevents the packet from being tampered by the hacker, hence ensures the integrity of the
packet.
E. In conjunction with anti-replay window and packet authentication, the AH protocol adopts 32
bits sequence number to prevent and defend replay attacks.
Answer: A,B,C,D,E
QUESTION NO: 75
Which of the following are the right description to the DR and BDR in the OSPF protocol? ( )
www.CertificationKing.com 24
Huawei GB0-280: Practice Exam
A. DR and BDR establish adjacency with all routers running OSPF in the network segment. But no
adjacency is established between the DR and BDR.
B. In the broadcast network, if there is no DR, the protocol can not operate normally. However, if
there is no BDR, the protocol can still operate normally.
C. DR will produce the Network LSA (Type = 2) for the current network segment, but BDR will not.
D. In the broadcast network, even there is only one router, it is still necessary to elect the DR.
Answer: B,C,D
QUESTION NO: 76
Answer: B,C,D
QUESTION NO: 77
A. It partitions an AS into several sub-ASs. The IBGP peer in the sub-AS fully connects to each
other, and meanwhile connects to other sub-ASs.
B. Such important information as the next hop, MED and Local-Preference will not lose when
traversing the sub-AS.
C. The confederation can easily detect the route loop in the AS.
D. EBGP is adopted between the sub-ASs, the confederation itself and the AS external.
Answer: A,B,C,D
QUESTION NO: 78
A. RADIUS Server
B. LAC
C. LNS
D. Tunnel
www.CertificationKing.com 25
Huawei GB0-280: Practice Exam
Answer: B,C
QUESTION NO: 79
Answer: A,B,C,D
QUESTION NO: 80
Answer: F
QUESTION NO: 81
A. When BGP gets the route from a peer, it does not always add the route to the IP routing table.
B. BGP peers learn the same route information.
C. BGP forwards the route from the peers to all other peers.
D. None of the above
Answer: A
QUESTION NO: 82
www.CertificationKing.com 26
Huawei GB0-280: Practice Exam
Which of the following are right about the route-policy?
A. Parts with different seq-numbers relate to each other in AND, that is, the route matches with
each part in order. Passing all the nodes in the route-policy means passing the whole route-map.
B. A route-policy consists of multiple nodes. Every node is a test unit. seq-number is used to order
the test between the nodes.
C. Parts with different seq-numbers relate to each other in OR, that is, the route matches with
each part in order. Passing one part of the route-policy means passing the whole route-map.
D. Every node is made up of a group of if-match and apply clauses. if-match clause defines the
matching rule, that is, the requirement for the current route-map to pass the filter. The matched
object is the attribute of the route. apply clause defines the action to be taken when the route
meets the requirement in the if-match clause. The action is a set of configure commands to set the
attribute of the route.
Answer: B,C,D
QUESTION NO: 83
Answer: B,C,D
QUESTION NO: 84
Answer: A,B
www.CertificationKing.com 27
Huawei GB0-280: Practice Exam
QUESTION NO: 85
Answer: A,B,C,D
QUESTION NO: 86
Which of the following are the meaning of the command radius timer response-timeout 5 ? ( )
A. If no response from the RADIUS server is received in 5 seconds, re-send the authentication
request.
B. If no response from the RADIUS server is received in 5 minutes, re-send the authentication
request.
C. If no response from the RADIUS server is received in 5 minutes, re-send the accounting
request.
D. If no response from the RADIUS server is received in 5 seconds, re-send the accounting
request.
Answer: A,D
QUESTION NO: 87
Why average length of the queue is adopted to check the length of the queue in WRED? ( )
Answer: B
QUESTION NO: 88
www.CertificationKing.com 28
Huawei GB0-280: Practice Exam
Which of the following are right about BGP router advertising the route?( )
Answer: B,C,D
QUESTION NO: 89
According to the OSPF protocol, the Router ID must be unique in the AS internal. Because the
Router LSA only performs intra-area propagation, even there are two intra-area routers, belonging
to two different areas though, with the same Router ID, it will result in no calculating errors. ( )
A. True
B. False
Answer: B
QUESTION NO: 90
Answer: A,B,C
QUESTION NO: 91
Which of the following are the right description to the DR and BDR in the OSPF protocol? ( )
A. DR will produce the Network LSA (Type = 2) for the current network segment, but BDR will not.
B. In the broadcast network, if there is no DR, the protocol can not operate normally. However, if
there is no BDR, the protocol can still operate normally.
C. In the broadcast network, even there is only one router, it is still necessary to elect the DR.
www.CertificationKing.com 29
Huawei GB0-280: Practice Exam
D. DR and BDR establish adjacency with all routers running OSPF in the network segment. But no
adjacency is established between the DR and BDR.
Answer: A,B,C
QUESTION NO: 92
A. HELLO packet
B. REFLASH packet
C. OPEN packet
D. UPDATE packet
E. KEEPALIVE packet
F. NOTIFICATION packet
Answer: C,D,E,F
QUESTION NO: 93
Answer: B
QUESTION NO: 94
www.CertificationKing.com 30
Huawei GB0-280: Practice Exam
Answer: A,B,C
QUESTION NO: 95
A. You can use this command to solve the problem that there are too many connections in the
IBGP fully-closed network.
B. You should use this command together with the neighbour command.
C. None of the above
D. You can use this command to define a BGP association.
Answer: A,B
QUESTION NO: 96
Which of the following are the configuration method taken for the IPSEC security policy? ( )
A. Configure manually.
B. Take advantage of L2TP self-negotiation
C. Take advantage of GRE self-negotiation
D. Take advantage of IKE negotiation.
Answer: A,D
QUESTION NO: 97
A. RADIUS Server
B. LNS
C. Tunnel
D. LAC
Answer: B,D
QUESTION NO: 98
Quidway series routers adopt the Radius server for accounting. Which of the following is the
default accounting port number? ( )
www.CertificationKing.com 31
Huawei GB0-280: Practice Exam
A. 1813
B. 1812
C. 1643
D. 1642
Answer: A
QUESTION NO: 99
Which of the following is the necessary configuration to enable a router running OSPF to advertise
the route to other routers via the frame relay network? ( )
Answer: B
Enable Custom Queue over Ethernet 0, and apply Group 10 in the Custom Queue to the interface.
Which of the following command should be used? ( )
A. [Quidway-Ethernet0] access-group 10
B. [Quidway-Ethernet0] qos cql 10
C. [Quidway-Ethernet0] acl 10
D. [Quidway-Ethernet0] qos cq cql 10
Answer: D
Two routers running the OSPF protocol are synchronizing the Link State Database. When you
check the peer state machine on one of them, it indicates it has reached the FULL state.
Therefore, such a conclusion can be drawn that if you check the peer state machine from the other
router, it should also indicate that it has reached the FULL state. ( )
A. False
B. True
www.CertificationKing.com 32
Huawei GB0-280: Practice Exam
Answer: A
Answer: A,C
A. Access VPN
B. Extranet VPN
C. Intranet VPN
D. Client initiated VPN
Answer: A,B,C
Which command listed below can achieve the following requirement: CAR rule 1 is specified to
match the packet with precedence 1, 3 or 5.
Answer: E
www.CertificationKing.com 33
Huawei GB0-280: Practice Exam
RTA notifies RTB about a learned route 1.1.1.0/24 from the EBGP peer. RTA and RTB are in the
same AS. The attributes of the route are listed as the following:
local preference:100
MED: 100
AS_PATH: 200
Answer: C
In the OSPF protocol, which of the following belong to the default NBMA network types ( )
A. Ethernet
B. X.25
C. ATM
D. Frame relay
E. PPP
www.CertificationKing.com 34