Professional Documents
Culture Documents
By Tashfeen, Ahmad
1. Download a template from:
http://www.instructables.com/id/Design-a-Keychain-With-Fusion-in-3-Steps/
2. Download Allah svg from
https://upload.wikimedia.org/wikipedia/commons/7/79/Allah.svg
3. Download Muhammad svg
https://commons.wikimedia.org/wiki/File:Muhammad_calligraphy.svg
4. Open the template that you downloaded from step one
a. Adjust the thickness:
i. Go to the timeline on the bottom
ii. Right click extrude 1
iii. Select edit feature
iv. Type 4mm
v. Hit ok
5. Go to insert
a. Select insert svg file
b. Click on the primary top surface of the keychain
c. Open the Allah svg
d. Move the image onto the template
e. Resize the image so it fits onto the template
f. Hit ok