Professional Documents
Culture Documents
z Chemical composition
(wt%)
Grade C Si Mn P S Cr Mo Ni Cu
0.38 0.15 0.60 Max. Max. 0.90 0.15 Max. Max.
SCM440
0.43 0.35 0.85 0.030 0.030 1.20 0.30 0.25 0.30
0.37 0.15 0.55 Max. Max. 0.85 0.15 Max. Max.
SCM440H
0.44 0.35 0.90 0.030 0.030 1.25 0.30 0.25 0.30
z Characteristics
1. Better tensile strength and percentage of elongation
than chromium steels.
2. Combine with Cr and Mo, high hardenability, good
resistance to tempered -softening.
3. Good strength and toughness。
z Application
Gear、shaft、screw、winch、nut、bobbin
z Heat Treatment
1. Annealing— Heat to approx. 830℃, furnace cooling.
2. Normalizing : Heat to approx.830~880℃, air cooling.
3. Quench: (1) Heat to 840~870℃, oil cooling.
4. Tempering: Heat to approx. 550~650℃, water cooling.
1
z Mechanical properties
z Hardenability Curve
Distance from quenched end (mm) Temp.℃
mm Normali
1.5 3 5 7 9 11 13 15 20 25 30 35 40 45 50 Quench
HRC zing
Max. 60 60 60 59 58 58 57 56 55 53 51 49 47 46 44
870 845
Min. 53 53 52 51 50 48 46 43 38 35 33 33 32 31 30
70
60
50
Hardness,HRC
40
30
20
10
0
1.5 3 5 7 9 11 13 15 20 25 30 35 40 45 50
z Availability
1. Annealing、Spheroidizing and QT condition.
2. Available size range: 5≦Φ≦650