Professional Documents
Culture Documents
Mean STD Min-Max and Number of of Filtered Points
Mean STD Min-Max and Number of of Filtered Points
Workflow
1. Set up a filter in a function window based on desired conditions
2. Remove Points outside the filter
3. Create a raw crossplot based on the filtered points
4. Select all the points in the crossplot
5. Obtain a readout of the mean, min/max, Std and no. of points
1. In a function window set up a crossplot of the desired logs (i.e. depth
and porosity) to create a filter. Additional filters can be defined and
combined to specify the desired points
2. Remove the points outside the filter
Go to the
settings for the
newly created
filter/filters