Professional Documents
Culture Documents
Erratum to
ANSI/AWA C1 1 O/A2 1.10-98
Standard
for
Ductile-Iron and Gray-Iron Fittings,
3 In. Through 48 ln.
(76mm Through 1,219 mm)
For Water
P.9, Fig. 1, The arrow head for the “F” dimension needsto be raised so that it touches the
dimension line extending between the minimum internal diameters of the gland and the
ball socket. (See following Figure)
P.10, Table 1,Bolt lengths for the 42-and 48-inch sizes should read6% inches not 6 inches.
(See following Table)