This document provides instructions for removing, inspecting, and installing the water pump on a 22R-E engine. The key steps are: 1) drain the coolant, 2) remove any accessory belts, 3) remove the fluid coupling, fan and water pump pulley, 4) remove the 6 bolts and 3 nuts to take off the water pump and gasket, 5) inspect the water pump bearing and fluid coupling for wear or damage, and 6) install the new water pump with gasket and bolts, refit the pulley and fan, replace any accessory belts, and refill the coolant.
This document provides instructions for removing, inspecting, and installing the water pump on a 22R-E engine. The key steps are: 1) drain the coolant, 2) remove any accessory belts, 3) remove the fluid coupling, fan and water pump pulley, 4) remove the 6 bolts and 3 nuts to take off the water pump and gasket, 5) inspect the water pump bearing and fluid coupling for wear or damage, and 6) install the new water pump with gasket and bolts, refit the pulley and fan, replace any accessory belts, and refill the coolant.
This document provides instructions for removing, inspecting, and installing the water pump on a 22R-E engine. The key steps are: 1) drain the coolant, 2) remove any accessory belts, 3) remove the fluid coupling, fan and water pump pulley, 4) remove the 6 bolts and 3 nuts to take off the water pump and gasket, 5) inspect the water pump bearing and fluid coupling for wear or damage, and 6) install the new water pump with gasket and bolts, refit the pulley and fan, replace any accessory belts, and refill the coolant.
1. DRAIN COOLANT (in coolant check and replacement) 2. w/ PS: REMOVE PS BELT 3. w/ A/C: REMOVE A/C BELT 4. REMOVE FLUID COUPLING WITH FAN AND WATER PUMP PULLEY (in timing chain removal in timing chain in Engine Mechanical) EG1–213 22R–E ENGINE – COOLING SYSTEM
5. REMOVE WATER PUMP
Remove the 6 bolts, 3 nuts, water pump and gasket.
WATER PUMP INSPECTION
1. INSPECT WATER PUMP BEARING Check that the water pump bearing moves smoothly and quietly.
2. INSPECT FLUID COUPLING
Check the fluid coupling for damage and silicone oil leakage.
WATER PUMP INSTALLATION
(See Components for Removal and Installation) 1. INSTALL WATER PUMP OVER NEW GASKET Install the water pump and a new gasket with the 6 bolts and 3 nuts. 2. INSTALL WATER PUMP PULLEY AND FLUID COUPLING WITH FAN (See step 9 in timing chain installation in timing chain in Engine Mechanical) 3. w/ A/C: INSTALL A/C BELT (See maintenance operations in Maintenance) 4. w/ PS: INSTALL PS BELT (See maintenance operations in Maintenance) 5. REFILL COOLANT (See coolant check and replacement)