MULTI FUNCTION & EQUAL ACCURACY COUNTER
F1000L/ F2400L / F2700L
OPERATING MANUALTABLE OF CONT
SECTION TITLE
1. INTRODUCTION SPECIFICATION
1. INTRODUCTION
2. SPECIFICATION
2. OPERATING THEORY
3. OPERATION
1. INTRODUCTION
2. PREPARATION FORUSE
3. FRONT PANEL FEATURE
4. REAR PANEL FEATRUE
§, OPERATION
4.1, Frequency measurements
2. Period measurements
5.3. Totalize measurements
5.4, Check mode
+
CALIBRATION
1. INTRODUCTION,
2. TESTINSTRUMENTS REQUIRED
3. TIMEBASEFREQUENCY ADJUSTMENT
4. TRIGGERLEVELADJUSTMENT
PAGE 1
PAGE
AR MN ND
Dron
a
a
eoeweSECTION 1
INTRODUCTION & SPECIFICATION
L.INTRODUCTION
This instrumentis a10Hzto 1000MHz. 2400MHz. 2700MHz multip !8-function & equal accuracy counter.
Itfeatures a eight digt, bright seven segment LED display, four function performance, LOW power consumption
circuit design, small size, Lightweltht, highstablized crystal oven oszillatorfor measurementof acuracy and full
inout signal conditioning
The fourfunctions are frequency, period, totalize and Selt check
This is accomplished by a single chip microcontroller. The input signal can be conditioned by attenuation. It
is recommended thatwhole information and datails should be read and understood befoew attempting to
operatethe instrument for correct operation and bast results
2. SPECIFICATIONS.
The pertinentspectications are listad as fellows:
Frequency measurements
CHANNELA.
Range 1OHz to 10MHz direct counter
10Mbhz to 100MHz prescaled by proportion
reasolution direct counter : 1,10, 100Hz switch selectable
presscaled 10,100,1000Hz switch selectable
Gatetime 0.Ols, 01s, Is switch selectable
Accuracy + teount-ttimabase error X measured
CHANNELB
Table 1
Model Number F1O00L F2400L F2700L,
Litem
Range 1OOMHz- 1GHz 4{00MHz- 2.4GHz 1OOMHz- 2.7GHz
100Hz,1KHz, 10KHz 100Hz, 1KHz, 10KHz 100H2,1KHz, 10KHz
O.04s, O.1s, 15 0.015, 0.15, 15 01s, 04s, 1s
Accuracy + teount + timebase error X measured frecuency
Period Measurements
Input Channel A
Range 10Hz To 10MHz
PAGE 2