This document contains a test for an Automobile Manufacturing Processes course. The test has 3 questions worth a total of 25 marks. Question 1 is worth 5 marks and requires writing a part program for one of two components on either a CNC lathe or milling machine. Question 2 is worth 8 marks and requires answering two out of three parts about CNC machine classifications, TIG welding, or buffing processes. Question 3 is worth 12 marks and requires answering three out of four parts about gas welding flames, combination dies, punch and die sets, or advantages and disadvantages of CNC machines. The student is wished best of luck on the test.
This document contains a test for an Automobile Manufacturing Processes course. The test has 3 questions worth a total of 25 marks. Question 1 is worth 5 marks and requires writing a part program for one of two components on either a CNC lathe or milling machine. Question 2 is worth 8 marks and requires answering two out of three parts about CNC machine classifications, TIG welding, or buffing processes. Question 3 is worth 12 marks and requires answering three out of four parts about gas welding flames, combination dies, punch and die sets, or advantages and disadvantages of CNC machines. The student is wished best of luck on the test.
This document contains a test for an Automobile Manufacturing Processes course. The test has 3 questions worth a total of 25 marks. Question 1 is worth 5 marks and requires writing a part program for one of two components on either a CNC lathe or milling machine. Question 2 is worth 8 marks and requires answering two out of three parts about CNC machine classifications, TIG welding, or buffing processes. Question 3 is worth 12 marks and requires answering three out of four parts about gas welding flames, combination dies, punch and die sets, or advantages and disadvantages of CNC machines. The student is wished best of luck on the test.
Malegaon (Bk) Progressive Theory Test - II Course Name: Automobile Engg. Semester: Fourth Subject: Automobile Manufacturing Processes Marks: 25 Subject Code: 17403 Time: 01 Hour
Q. 1 ) Attempt any ONE. (1 X 5)----------------------------------------05
a) Write part program for the component shown in Fig.01 on a CNC lathe machine.
(Use feed rate in mm / rev.)
Fig. 01 Fig. 02
b) Write part program for the component shown in Fig.02 on a CNC milling machine.
Q.2) Attempt any TWO. (2 X 4)----------------------------------------08
a) Write classification of CNC machines.
b) With neat sketch explain TIG process with its application. c) Explain buffing process with its application.
Q.3) Attempt any THREE. (3 X4)----------------------------------------12
a) With neat sketch explain the types of flames in gas welding.
b) Explain combination die with neat sketch. c) Draw a labeled sketch of punch & die set used for punching operation. d) State advantages & disadvantages of CNC machines.
****************** BEST OF LUCK ********************
Mechanical Properties and Performance of Engineering Ceramics and Composites X: A Collection of Papers Presented at the 39th International Conference on Advanced Ceramics and Composites