Professional Documents
Culture Documents
Specifications
Capacities: .............. Up to 100,000 gpm (2,273 m3/hr)
Head: ........................ Up to 2,300 feet (760 meters)
Pressure: ................. Fit to the application
Horsepower: ......... Up to 5,000 hp (3,730 kW)
Temperature: ......... Up to 180 °F (82 °C)
Drives: ....................... Vertical electric motors, engines with right angle gears,
...................................... combination gear drives, or vertical motors with
...................................... variable speed drives
Liquids: ..................... Water or abrasive liquids
Materials: ................. Cast iron/bronze-fitted standard; alternate materials available to suit the application.
Vertical Lineshaft Turbine Pumps
Adjusting Nut
Quickly and easily adjusts shaft
to correctly position impellers for Top Drive Coupling
maximum sustained efficiency NRR is Standard
10000
4000 liquid into the enclosing tube
6000 2000 Shaft Support with an optional water or oil
4000
1000 Oil lubricated sleeve-type bronze flush connection
2000
400 bearing provides additional shaft
support.
1000
600 200
HEAD (Meters)
Shaft Couplings
400
HEAD (Feet)
100
200
40
Stabilizing “Spiders” Machined from heavy-duty
alloys. “Weep” hole in the
100
60 20
Installed at intervals along the
40 10
enclosing tube, serving to stabalize center of each coupling
20
4 the tube within the column pipe permits air and excess thread
compound to escape, so the
10
6 2
4
1 shaft sections butt together
2
0.4
Lineshaft smoothly
1 Water lubricated, 416 SS as
0.2
standard. Optional lineshaft
0.6
0.3
Enclosing Tube
materials also available
0.09
1 2 4 6 10 20 40 60 100 200 400 1000 2000 4000 10000 20000 40000
Heavy-duty steel, provides
FLOW (GPM)
rigid and vibration-free
support for the shaft. Each
Top Bowl tube is precision made
Designed with extra long for correct alignment and
bronze bearings to provide impermeable sealing
optimal support
4000
10000
6000 2000
Impellers
Enclosed-type, cast bronze as
4000 1000
2000 600
400
Lateral Seal Wear Rings standard. All vanes and guide
HEAD (Meters)
1000
200 60
100
40
protection
60 20
40 10
20 6
10
4
Taper-Lock Bushing
6
4
2
Securely fastens impellers to
the shaft; some pump sizes
1
2 0.6
FLOW (GPM)
Suction Manifold
“Bell” design available in
a threaded design for use
with suction pipe or a cone
strainer for well application;
a “threaded” design is also
available