Professional Documents
Culture Documents
1756 td002 - en e PDF
1756 td002 - en e PDF
The ControlLogix® architecture provides a wide range of input and output modules to span
many applications, from high-speed digital to process control. The ControlLogix architecture
uses Producer/Consumer technology, which allows input information and output status to be
shared among multiple ControlLogix controllers.
Each ControlLogix I/O module mounts in a ControlLogix chassis and requires either a
removable terminal block (RTB) or a 1492 interface module (IFM) to connect all field-side
wiring. RTBs and IFMs are not included with the I/O modules. They must be ordered
separately.
1756 ControlLogix I/O Specifications
Summary of Changes
This publication contains new and updated information as indicated in the following table.
Topic Page
Updated 1756-IF4FXOF2F specifications 37
Updated 1756-IF8 specifications 49
Updated 1756-IF8H specifications 54
Updated 1756-IF8IH specifications 61
Updated 1756-IF16 specifications 65
Updated 1756-IF16H specifications 70
Updated 1756-IF16IH specifications 73
Updated 1756-OF4 specifications 175
Updated 1756-OF8 specifications 185
Updated 1756-OF8H specifications 189
Updated 1756-OF8IH specifications 197
1756-IA8D
L1
Certifications - 1756-IA8D
Certification(1) 1756-IA8D
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IA16
+5V Daisy
IN-3 IN-2
IN-O 6 5
Chain to
IN-5 IN-4 Group 0
Other
L2-0 8 7
RTBs
IN-7 IN-6
10 9
GND
L2-0 L2-0
12 11
ControlLogix Display IN-9 IN-8
Backplane 14 13
ST 0 1 2 3 4 5 6 7 O L2-1 L2-1
FLT 0 1 2 3 4 5 6 7 K
L2 L1
Certifications - 1756-IA16
Certification(1) 1756-IA16
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IA16I
ST 0 1 2 3 4 5 6 7 O
ST 8 9 10 11 12 13 14 15 K
Daisy Chain to
Other RTBs
Certifications - 1756-IA16I
Certification(1) 1756-IA16I
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IA32
Simplified Schematic
1756-IA32
+5V
IN-O
IN-1 2 1 IN-0
L2-0 IN-3 4 3 IN-2
Group 0 IN-5 6 5 IN-4 Group 0
IN-7 8 7 IN-6
GND
Daisy Chain IN-9 10 9 IN-8
to Other RTBs IN-11 12 11 IN-10
ControlLogix Display
Backplane IN-13 14 13 IN-12
Interface IN-15 16 15 IN-14
L2-0 18 17 L2-0
IN-17 20 19 IN-16
IN-19 22 21 IN-18
IN-21 24 23 IN-20
Group 1 Group 1
IN-23 26 25 IN-22
AC INPUT
IN-25 28 27 IN-24
ST 0 1 2 3 4 5 6 7 IN-27 30 29 IN-26 L1
1 1 1 1 1 1 O
ST 8 9 0 1 2 3 4 5 IN-29 32 31 IN-28
K
1 1 1
ST 6 7 8
1 2 2 2 2 IN-31 34 33 IN-30
9 0 1 2 3
2 2 2 2 2 2 3 3 L2-1 36 35 L2-1
ST 4 5 6 7 8 9 0 1 L2
Certifications - 1756-IA32
Certification(1) 1756-IA32
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IB16
IN-1 IN-0
+5V
Group 0
IN-0 IN-3 IN-2
Daisy Chain
IN-7 IN-6
GND
IN-11 IN-10
Group 1 IN-12 Group 1
DC INPUT IN-13
IN-15 IN14
ST 0 1 2 3 4 5 6 7 O
ST 8 9 10 11 12 13 14 15 K
GND-1 GND-1
- +
DC COM
Certifications - 1756-IB16
Certification(1) 1756-IB16
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T3 X Gc
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IB16D
1756-IB16D
Simplified Schematic
Daisy Chain to Other RTBs
ControlLogix
Input +5V GND-0 2 1 IN-0
Backplane
IN-0 Interface Display GND-0 4 3 IN-1
Group 0 GND-0 IN-2 Group 0
6 5 Leakage Resistor
GND-0 8 7 IN-3
GND-1 10 9 IN-4
GND-1 12 11 IN-5
Group 1 Group 1
GND-1 14 13 IN-6
GND-0
GND-1 16 15 IN-7
GND-2 18 17 IN-8
GND GND-2 20 19 IN-9
Group 2 Group 2
GND-2 22 21 IN-10 Leakage Resistor
Open Wire GND-2 24 23 IN-11
GND-3 26 25 IN-12
GND-3 28 27 IN-13
Group 3 GND-3 30 29 IN-14 Group 3
GND-3 32 31 IN-15
GND-3 34 33 Not Used
Not Used 36 35 Not Used
DC INPUT
– +
ST 0 1 2 3 4 5 6 7 DC COM
FLT 0 1 2 3 4 5 6 7 O
K
ST 8 9 10 11 12 13 14 15
FLT 8 9 10 11 12 13 14 15 Recommended Leakage Resistor Size 1/4 W, 5% Supply Voltage
DIAGNOSTIC
3.9K 10V DC
5.6K 12V DC
15K 24V DC
20K 30V DC
Certifications - 1756-IB16D
Certifications(1) 1756-IB16D
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T3 X Gc
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IB16I
ST 0 1 2 3 4 5 6 7 O
ST 8 9 10 11 12 13 14 15 K
Certifications - 1756-IB16I
Certification(1) 1756-IB16I
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with: AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IB16IF
Simplified Schematic
Isolated Wiring
1756-IB16IF
GND-0 2 1 IN-0
DC-1 (-) GND-1 4 3 IN-1 DC-1 (+)
DC-2 (-) GND-2 6 5 IN-2 DC-2 (+)
GND-3 8 7 IN-3
Source Input Wiring GND-4 10 9 IN-4
DC-5 (-) GND-5 12 11 IN-5 (+) DC-5 (+)
DC-6 (-) GND-6 14 13 IN-6 (+) DC-6 (+)
GND-7 16 15 IN-7
Jumper Bar Cut to Length GND-8 18 17 IN-8
GND-9 Sink Input Wiring
20 19 IN-9
GND-10 22 21 IN-10
GND-11 24 23 IN-11
GND-12 26 25 IN-12
Nonisolated Wiring
GND-13 28 27 IN-13
GND-14 30 29 IN-14
GND-15 32 31 IN-15
DC (-) GND-15 34 33 Not Used DC (+)
Not Used 36 35 Not Used
ST 01 2 3 4 5 6 7 O
ST 8 9 10 11 12 13 14 15 K
PEER DEVICE
Certifications - 1756-IB16IF
Certification(1) 1756-IB16IF
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IB16ISOE
SOE INPUT
ST 0 1 2 3 4 5 6 7 O
ST 8 9 10 11 12 13 14 15 K
Certifications - 1756-IB16ISOE
Certification(1) 1756-IB16ISOE
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IB32
+5V
Current Limiter IN-1 2 1 IN-0
IN-0 IN-2
IN-3 4 3
IN-5 6 5 IN-4
GND-0
Group 0 IN-7 8 7 IN-6 Group 0
IN-9 10 9 IN-8
GND Daisy Chain
IN-11 12 11 IN-10
to Other RTBs
IN-13 14 13 IN-12
ControlLogix Display IN-15 16 15 IN-14
Backplane GND-0 18 17 GND-0
Interface
IN-17 20 19 IN-16
IN-19 22 21 IN-18
IN-21 24 23 IN-20
IN-23 26 25 IN-22
Group 1 Group 1
IN-25 28 27 IN-24
IN-27 30 29 IN-26
IN-29 32 31 IN-28
DC INPUT IN-30
IN-31 34 33
ST 0 1 2 3 4 5 6 7 GND-1 36 35 GND-1
1 1 1 1 1 1 O
ST 8 9 0 1 2 3 4 5
K
1 1 1 1 2 2 2 2
ST 6 7 8 9 0 1 2 3
2 2 2 2 2 2 3 3
DC COM – +
ST 4 5 6 7 8 9 0 1
Certifications - 1756-IB32
Certification(1) 1756-IB32
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IC16
Simplified Schematic 2 1
IN-1 IN-0
+5V 4 3
IN-0
IN-3 IN-2
6 5
GND-0 IN-5 IN-4
Group 0 Group 0
8 7
GND IN-7 IN-6
10 9
IN-15 IN-14
DC INPUT 20 19
GND-1 GND-1
ST 0 1 2 3 4 5 6 7 O
ST 8 9 10 11 12 13 14 15K
Daisy Chain to
Other RTBs – +
DC COM
Certifications - 1756-IC16
Certification(1) 1756-IC16
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IF4FXOF2F
ControlLogix high-speed input/output analog module
ANALOG INPUT
ANALOG OUTPUT
CAL
OK
1756-TBS6H
Single wire connection: 0.33…2.1 mm² (22…14 AWG) solid or stranded shielded copper wire rated at 105 °C (221 °F),
or greater, 1.2 mm (3/64 in.) insulation max
Terminal block torque specs 1756-TBCH: 0.5 Nm (4.4 pound-inches)
Wiring category(1) 2 - on signal ports
North American temp code T4A
ATEX temp code T4
IECEx temperature code T4
Enclosure type None (open-style)
(1) Use this Conductor Category information for planning conductor routing. See the Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.
Certifications - 1756-IF4FXOF2F
Certification(1) 1756-IF4FXOF2F
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
CE European Union 2014/30/EU EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2014/35/EU LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
RCM Australian Radiocommunications Act, compliant with:
EN 61000-6-4; Industrial Emissions
Ex European Union 2014/34/EU ATEX Directive, compliant with:
• EN 60079-0; General Requirements
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• DEMKO15ATEX1482X
IECEx IECEx System, compliant with:
• IEC 60079-0; General Requirements
• IEC 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• IECEx UL 15.0053X
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
EAC Russian Customs Union TR CU 020/2011 EMC Technical Regulation
Russian Customs Union TR CU 004/2011 LV Technical Regulation
(1) When product is marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IF6CIS
1756-IF6CIS 2-wire Transmitter Connected to the Module and the Module Providing 1756-IF6CIS 2-wire Transmitter Connected to the Module and an External,
24V DC Loop Power User-provided Power Supply Providing 24V DC Loop Power
2 1 2 1
A
VOUT-1 VOUT-0 VOUT-1 VOUT-0 i
4 3 4 3
A
IN-1/I IN-0/I IN-1/I IN-0/I 2-wire
A 6 5
6 5 Transmitter
i RTN-1 RTN-0 24V DC
RTN-1 RTN-0 – +
8 7 A
8 7
VOUT-3 VOUT-2 VOUT-3 VOUT-2
10 9
10 9
IN-3/I IN-2/I Shield Ground IN-3/I IN-2/I
12 11
12 11
RTN-3 RTN-2 Shield Ground
RTN-3 RTN-2
14 13
14 13
Not Used Not Used
Not Used Not Used
16 15
16 15
VOUT-5 VOUT-4
VOUT-5 VOUT-4
18 17
18 17
IN-5/I IN-4/I
IN-5/I IN-4/I 20 19
20 19
RTN-5 RTN-4
RTN-5 RTN-4
Place additional loop devices (such as strip chart recorders) at either A location in the current loop.
2 1
VOUT-1 VOUT-0 i
4 3
A + +
IN-1/I IN-0/I
4-wire 24V DC ANALOG INPUT
6 5
Transmitter
RTN-1 RTN-0
A – – CAL
8 7
VOUT-3 VOUT-2 OK
10 9
IN-3/I IN-2/I
12 11
RTN-3 RTN-2 Shield Ground
14 13
Not Used Not Used
16 15
VOUT-5 VOUT-4
18 17
IN-5/I IN-4/I
20 19
RTN-5 RTN-4
• Place additional loop devices (such as strip chart recorders) at either A
location in the current loop.
• User-supplied power supply must not exceed 150VA.
Certifications - 1756-IF6CIS
Certification(1) 1756-IF6CIS
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IF6I
2 1 2 1
+ IN-1/V IN-0/V
IN-1/V IN-0/V –
4 3
4 3
2-wire +
i IN-1/I IN-0/I
IN-1/I IN-0/I Transmitter A 4-wire
A 6 5 i Transmitter
6 5
RET-1 RET-0
RET-1 RET-0 A –
8 7
8 7 A
IN-3/V IN-2/V
IN-3/V IN-2/V 10 9
10 9 IN-3/I IN-2/I
IN-3/I IN-2/I 12 11
Shield Ground
12 11 RET-3 RET-2
RET-3 RET-2 14 13
Not Used Not Used
14 13
16 15
Not Used Not Used
IN-5/V IN-4/V
16 15
18 17
IN-5/V IN-4/V IN-5/I IN-4/I
18 17 20 19
IN-5/I IN-4/I RET-5 RET-4
20 19
RET-5 RET-4
Place additional loop devices (such as strip chart recorders) at either A location.
1756-IF6I Voltage
Voltage Input
2 1
IN-1/V IN-0/V +
4 3
User Analog
IN-1/I IN-0/I Input Device
6 5
RET-1 RET-0 –
8 7
Device
External
IN-3/V IN-2/V Power
10 9
ANALOG INPUT
IN-3/I IN-2/I
CAL
12 11
RET-3 RET-2 OK
14 13
Not Used Not Used
16 15
IN-5/V IN-4/V
18 17
IN-5/I IN-4/I Shield Ground
20 19
RET-5 RET-4
Certifications - 1756-IF6I
Certification(1) 1756-IF6I
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IF8
• Use this table when wiring your module in Differential mode. • Use this table when wiring your module in Differential mode.
This channel Uses these terminals This channel Uses these terminals
Channel 0 IN-0 (+), IN-1 (-), i RTN-0 Channel 0 IN-0 (+), IN-1 (-)
Channel 1 IN-2 (+), IN-3 (-), i RTN-2 Channel 1 IN-2 (+), IN-3 (-)
Channel 2 IN-4 (+), IN-5 (-), i RTN-4 Channel 2 IN-4 (+), IN-5 (-)
Channel 3 IN-6 (+), IN-7 (-), i RTN-6 Channel 3 IN-6 (+), IN-7 (-)
• All terminals marked RTN are connected internally. • All terminals marked RTN are connected internally.
• A 249 current loop resistor is located between IN-x and i RTN-x terminals. • If multiple (+) or multiple (-) terminals are tied together, connect that tie
• If multiple (+) or multiple (-) terminals are tied together, connect that tie point to point to a RTN terminal to maintain the module’s accuracy.
a RTN terminal to maintain the module’s accuracy. • Terminals marked RTN or i RTN are not used for differential voltage wiring.
• Place additional loop devices (such as strip chart recorders) at the A location in the
current loop. IMPORTANT: When operating in 2-channel, High-Speed mode, only use channels 0 and 2.
IMPORTANT: When operating in 2-channel, High-Speed mode, only use channels 0 and 2.
Channel 0
i
Channel 0 +
IN-0 2 1 i RTN-0
IN-0 2 1 i RTN-0
IN-1 4 3 i RTN-1
Jumper IN-1 4 3 i RTN-1
IN-2 6 5 i RTN-2 Wires –
eld Ground IN-2 6 5 i RTN-2
IN-3 8 7 i RTN-3
8 7
10 9 IN-3 i RTN-3
Channel 5 RTN RTN Shield Ground
10 9
12 11 RTN RTN
i IN-4 i RTN-4
+ 12 11
2-wire Channel 1 IN-4 i RTN-4
IN-5 14 13 i RTN-5
Transmitter 14 13
A IN-6 16 15 i RTN-6 IN-5 i RTN-5
16 15
IN-7 18 17 i RTN-7 – IN-6 i RTN-6
IN-7 18 17 i RTN-7
Not Used 20 19 Not Used
Not Used 20 19 Not Used
Not Used 22 21 Not Used
Not Used 22 21 Not Used
Not Used 24 23 Not Used
Shield Ground Not Used 24 23 Not Used
Not Used 26 25 Not Used
Not Used 26 25 Not Used
Not Used 28 27 Not Used
Not Used 28 27 Not Used
Not Used 30 29 Not Used
Not Used 30 29 Not Used
Not Used 32 31 Not Used
Not Used 32 31 Not Used
Not Used 34 33 Not Used
Not Used 34 33 Not Used
Not Used 36 35 Not Used
Not Used 36 35 Not Used
• All terminals marked RTN are connected internally. • All terminals marked RTN are connected internally.
• For current applications, all terminals marked iRTN must be wired to terminals • Terminals marked i RTN are not used for single-ended voltage wiring.
marked RTN.
• A 249 current loop resistor is located between IN-x and i RTN-x terminals.
• Place additional loop devices (such as strip chart recorders) at the A location in the
current loop.
ANALOG INPUT
CAL
OK
1756-TBS6H
Single wire connection: 0.33…2.1 mm² (22…14 AWG) solid or stranded shielded copper wire, rated at |105 °C (221 °F) or
greater, 1.2 mm (3/64 in.) insulation max
Terminal block torque specs 1756-TBCH: 0.5 N•m (4.4 lb•in)
Wiring category(1) 2 - on signal ports
North American temp code T4A
ATEX temp code T4
IECEx temp code T4
Enclosure type None (open-style)
(1) Use this Conductor Category information for planning conductor routing. See the Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.
(2) Notch filter dependent.
Certifications - 1756-IF8
Certification(1) 1756-IF8
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
CE European Union 2014/30/EU EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2014/35/EU LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
RCM Australian Radiocommunications Act, compliant with:
EN 61000-6-4; Industrial Emissions
Ex European Union 2014/34/EU ATEX Directive, compliant with:
• EN 60079-0; General Requirements
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• DEMKO15ATEX1482X
IECEx IECEx System, compliant with:
• IEC 60079-0; General Requirements
• IEC 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• IECEx UL 15.0053X
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
EAC Russian Customs Union TR CU 020/2011 EMC Technical Regulation
Russian Customs Union TR CU 004/2011 LV Technical Regulation
(1) See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IF8H
1756-TBS6H
Single wire connection: 0.33…2.1 mm² (22…14 AWG) solid or stranded shielded copper wire, rated at
105 °C (221 °F) or greater, 1.2 mm (3/64 in.) insulation max
Terminal block torque specs 1756-TBCH 0.5 N•m (4.4 lb•in)
Wire category(1) 2 - on signal ports
Wire type Copper
North American temp code T5
ATEX temp code T4
IECEx temp code T4
Enclosure type rating None (open-style)
(1) Use this conductor category information for planning conductor routing as described in the system-level installation manual. See the Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.
Certifications - 1756-IF8H
Certification(1) 1756-IF8H
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CE European Union 2014/30/EU EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
RCM Australian Radiocommunications Act, compliant with:
EN 61000-6-4: Industrial Emissions
Ex European Union 2014/34/EU ATEX Directive, compliant with:
• EN 60079-0; General Requirements
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• DEMKO12ATEX1219040X
IECEx IECEx System, compliant with:
• IEC 60079-0; General Requirements
• IEC 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• IECEx UL 16.0109X
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
EAC Russian Customs Union TR CU 020/2011 EMC Technical Regulation
Russian Customs Union TR CU 004/2011 LV Technical Regulation
(1) When product is marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IF8I
1756-IF8I Module Wiring Diagram -Current Mode with External Loop Power
i
IN_0/V IN_1/V
+ + 2 1
IMPORTANT: Remember the following: 4-wire A IN_0/I/SRC IN_1/I/SRC
4 3
• In this wiring diagram, an external, user- 24V DC Transmitter RTN_0 6 5
RTN_1
provided power supply provides 24V DC – – A Not used Not used
loop power. 8 7
• If separate power sources are used, do not IN_2/V IN_3/V
10 9
exceed the specific isolation voltage as IN_2/I/SRC 12 11
IN_3/I/SRC
Shield Ground
listed in the specifications. RTN_2 RTN_3
14 13
• Place additional loop devices, for example,
Not used Not used
strip chart recorders, at either ‘A’ location in 16 15
the current loop. IN_4/V IN_5/V
18 17
IN_4/I/SRC IN_5/I/SRC
20 19
RTN_4 22 21
RTN_5
Not used Not used
24 23
i IN_6/V 26 25
IN_7/V
2-wire – A IN_6/I/SRC 28 27 IN_7/I/SRC
Transmitter
+ 24V DC A RTN_6 30 29 RTN_7
+ – Not used 32 31 Not used
Not used 34 33 Not used
Shield Ground Not used 36 35 Not used
1756-IF8I Module Wiring Diagram -Current Mode with Internal Loop Power
IN_0/V 2 1 IN_1/V
IMPORTANT: Remember the following: 2-wire + A IN_0/I/SRC 4 3 IN_1/I/SRC
• In this wiring diagram, the module Transmitter
- A RTN-0 6 5 RTN-1
provides 24V DC loop power.
• If separate power sources are used, do i Not used 8 7 Not used
Certifications - 1756-IF8I
Certification(1) 1756-IF8I
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
• EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
• EN 61000-6-4; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 Gc X
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
• Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IF8IH
IN2 12 11 IN3
RTN2 14 13 RTN3
Reserved 16 15 Reserved
Reserved 18 17 Reserved
IN4 20 19 IN5
RTN4 22 21 RTN5
Reserved Reserved
24 23
i Reserved 26 25 Reserved
–
A IN6 28 27 IN7
+ A RTN6 30 29 RTN7
Reserved 32 31 Reserved
Reserved Reserved
34 33
Not Used 36 35 Not Used
1756-TBS6H
Single wire connection: 0.33…2.1 mm² (22…14 AWG) solid or stranded shielded copper wire, rated at 105 °C (221 °F)
or greater, 1.2 mm (3/64 in.) insulation max
Terminal block torque specs 1756-TBCH 0.4 N•m (4. 4 lb•in)
Wire category 2 - on signal ports(1)
Wire type Copper
North American temp code T5
ATEX temp code T4
IECEx temp code T4
Enclosure type None (open-style)
(1) Use this conductor category information for planning conductor routing. See Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.
Certifications - 1756-IF8IH
Certification(1) 1756-IF8IH
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584
UL Listed for Class I, Division 2 Group A, B, C, D Hazardous Locations, certified for US and Canada. See UL File
E194810.
CE European Union 2014/30/EU EMC Directive, compliant with:
• EN 61326-1: Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2: Industrial Immunity
• EN 61000-6-4: Industrial Emissions
• EN 61131-2: Programmable Controllers (Clause 8, Zone A and B)
European Union 2014/35/EU LVD, compliant with:
• EN 61131-2: Programmable Controllers (Clause 11)
RCM Australian Radiocommunications Act, compliant with:
• EN 61000-6-4: Industrial Emissions
Ex European Union 2014/34/EU ATEX Directive, compliant with:
• EN 60079-0; General Requirements
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• DEMKO14ATEX1238X
IECEx IECEx System, compliant with:
• IEC 60079-0; General Requirements
• IEC 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• IECEx UL 16.0110X
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
• Article 58-2 of Radio Waves Act, Clause 3
EAC Russian Customs Union TR CU 020/2011 EMC Technical Regulation
Russian Customs Union TR CU 004/2011 LV Technical Regulation
(1) When product is marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IF16
Use this table when wiring your module in Differential mode. Use this table when wiring your module in Differential mode.
This channel Uses these terminals This channel Uses these terminals
Channel 0 IN-0 (+), IN-1 (-), i RTN-0 Channel 0 IN-0 (+), IN-1 (-)
Channel 1 IN-2 (+), IN-3 (-), i RTN-2 Channel 1 IN-2 (+), IN-3 (-)
Channel 2 IN-4 (+), IN-5 (-), i RTN-4 Channel 2 IN-4 (+), IN-5 (-)
Channel 3 IN-6 (+), IN-7 (-), i RTN-6 Channel 3 IN-6 (+), IN-7 (-)
Channel 4 IN-8 (+), IN-9 (-), i RTN-8 Channel 4 IN-8 (+), IN-9 (-)
Channel 5 IN-10 (+), IN-11 (-), i RTN-10 Channel 5 IN-10 (+), IN-11 (-)
Channel 6 IN-12 (+), IN-13 (-), i RTN-12 Channel 6 IN-12 (+), IN-13 (-)
Channel 7 IN-14 (+), IN-15 (-), i RTN-14 Channel 7 IN-14 (+), IN-15 (-)
• All terminals marked RTN are connected internally. • All terminals marked RTN are connected internally.
• A 249 current loop resistor is located between IN-x and i RTN-x terminals. • If multiple (+) or multiple (-) terminals are tied together, connect that tie
• If multiple (+) or multiple (-) terminals are tied together, connect that tie point to point to a RTN terminal to maintain the accuracy of the module.
a RTN terminal to maintain the accuracy of the module. • Terminals marked RTN or i RTN are not used for differential voltage wiring.
• Place additional loop devices (such as strip chart recorders) at the A location in the
current loop. IMPORTANT: When operating in 4-channel, High-Speed mode, only use channels 0, 2, 4,
and 6.
IMPORTANT: When operating in 4-channel, High-Speed mode, only use channels 0, 2, 4, and 6.
i +
IN-0 2 1 i RTN-0 IN-0 2 1 i RTN-0
IN-1 4 3 i RTN-1 IN-1 4 3 i RTN-1
Jumper –
IN-2 6 5 i RTN-2 IN-2 6 5 i RTN-2
Shield Wires IN-3 8 7 i RTN-3
IN-3 8 7 i RTN-3 Shield
Ground RTN 10 9 RTN
RTN 10 9 RTN Ground
IN-4 12 11 i RTN-4
IN-4 12 11 i RTN-4 +
2-wire i IN-5 14 13 i RTN-5
IN-5 14 13 i RTN-5
Transmitter A – IN-6 16 15 i RTN-6
IN-6 16 15 i RTN-6
IN-7 18 17 i RTN-7
IN-7 18 17 i RTN-7
IN-8 20 19 i RTN-8
IN-8 20 19 i RTN-8 IN-9 22 21 i RTN-9
IN-9 22 21 i RTN-9
Shield IN-10 24 23 i RTN-10
IN-10 24 23 i RTN-10 Ground IN-11 26 25 i RTN-11
IN-11 26 25 i RTN-11 RTN 28 27 RTN
RTN 28 27 RTN IN-12 30 29 i RTN-12
IN-12 30 29 i RTN-12 IN-13 32 31 i RTN-13
IN-13 32 31 i RTN-13 IN-14 34 33 i RTN-14
IN-14 34 33 i RTN-14 IN-15 36 35 i RTN-15
IN-15 36 35 i RTN-15
• All terminals marked RTN are connected internally. • All terminals marked RTN are connected internally.
• For current applications, all terminals marked i RTN must be wired to terminals • Terminals marked i RTN are not used for single-ended voltage wiring.
marked RTN.
• A 249 current loop resistor is located between IN-x and iRTN-x terminals.
• Place additional loop devices (such as strip chart recorders) at the A location in the
current loop.
ANALOG INPUT
CAL
OK
1756-TBS6H
Single wire connection: 0.33…2.1 mm² (22…14 AWG) solid or stranded shielded copper wire, rated at
105 °C (221 °F) or greater, 1.2 mm (3/64 in.) insulation max
Terminal block torque specs 1756-TBCH: 0.5 N•m (4.4 lb•in)
Wire category(1) 2 - on signal ports
North American temp code T4A
ATEX temp code T4
IECEx temp code T4
Enclosure type None (open-style)
(1) Use this Conductor Category information for planning conductor routing. See the Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.
(2) Notch filter dependent.
Certifications - 1756-IF16
Certification(1) 1756-IF16
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
CE European Union 2014/30/EU EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2014/35/EU LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
RCM Australian Radiocommunications Act, compliant with:
EN 61000-6-4; Industrial Emissions
Ex European Union 2014/34/EU ATEX Directive, compliant with:
• EN 60079-0; General Requirements
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• DEMKO15ATEX1482X
IECEx IECEx System, compliant with:
• IEC 60079-0; General Requirements
• IEC 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• IECEx UL 15.0053X
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
EAC Russian Customs Union TR CU 020/2011 EMC Technical Regulation
Russian Customs Union TR CU 004/2011 LV Technical Regulation
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IF16H
2 1
+ +- IN0 4 3 IN1
- RTN0 6 5 RTN1
When a common supply is used, tie
IN2 8 7 IN3
the IN- to RTN.
RTN2 10 9 RTN3
+ + + IN4 12 11 IN5
RTN4 14 13 RTN5
- - -
IN6 16 15 IN7
RTN6 18 17 RTN7
IN8 20 19 IN9
RTN8 22 21 RTN9
IN10 24 23 IN11
ANALOG INPUT
RTN10 26 25 RTN11
IN12 28 27 IN13
CAL
RTN12 30 29 RTN13
OK IN14 32 31 IN15
RTN14 34 33 RTN15
HART
36 35
1756-TBS6H
Single wire connection: 0.33…2.1 mm² (22…14 AWG) solid or stranded shielded copper wire, rated at
105 °C (221 °F) or greater, 1.2 mm (3/64 in.) insulation max
Terminal block torque spec 1756-TBCH 0.5 N•m (4.4 lb•in)
Wire category(1) 2 - on signal ports
Wire type Copper
North American temp code T5
ATEX temp code T4
IECEx temp code T4
Enclosure type rating None (open-style)
(1) Use this Conductor Category information for planning conductor routing. See the Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.
Certifications - 1756-IF16H
Certification(1) 1756-IF16H
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CE European Union 2014/30/EU EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
RCM Australian Radiocommunications Act, compliant with:
• EN 61000-6-4; Industrial Emissions
Ex European Union 2014/34/EU ATEX Directive, compliant with:
• EN 60079-0; General Requirements
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• DEMKO12ATEX1219040X
IECEx IECEx System, compliant with:
• IEC 60079-0; General Requirements
• IEC 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• IECEx UL 16.0109X
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
• Article 58-2 of Radio Waves Act, Clause 3
EAC Russian Customs Union TR CU 020/2011 EMC Technical Regulation
Russian Customs Union TR CU 004/2011 LV Technical Regulation
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IF16IH
1756-TBS6H
Single wire connection: 0.33…2.1 mm² (22…14 AWG) solid or stranded shielded copper wire, rated at
105 °C (221 °F) or greater, 1.2 mm (3/64 in.) insulation max
Terminal block torque specs 1756-TBCH 0.5 N•m (4.4 lb·in)
Wiring category(1) 2 - on signal ports
Wire type Copper
North American temp code T5
ATEX temp code T4
IECEx temp code T4
Enclosure type rating None (open-style)
(1) Use this conductor category information for planning conductor routing. See Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.
Certifications - 1756-IF16IH
Certification(1) 1756-IF16IH
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CE European Union 2014/30/EU EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2014/35/EU LVD, compliant with:
• EN 61131-2; Programmable Controllers (Clause 11)
RCM Australian Radiocommunications Act, compliant with:
• EN 61000-6-4; Industrial Emissions
Ex European Union 2014/34/EU ATEX Directive, compliant with:
• EN 60079-0; General Requirements
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• DEMKO14ATEX1238X
IECEx IECEx System, compliant with:
• IEC 60079-0; General Requirements
• IEC 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• IECEx UL 16.0110X
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
• Article 58-2 of Radio Waves Act, Clause 3
EAC Russian Customs Union TR CU 020/2011 EMC Technical Regulation
Russian Customs Union TR CU 004/2011 LV Technical Regulation
(1) When product is marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IG16
1756-IG16 1756-IG16
– DC
2 1 I/O Wire
2 1 IN-1 IN-0
4 3
IN-1 IN-0
4 3 IN-3 IN-2
5V DC IN-3 IN-2 6 5
6 5 IN-5 IN-4 +
8 7 I/O Wire
IN-5 IN-4
8 7 + IN-7 IN-6
IN-7 IN-6 DC Power Wire 10 9
–
10 9 – DC-0(+) DC COM 0
+ DC DC-0(+) DC COM 0 12 11
12 11 IN-9 IN-8 TTL Input
14 13 Device
IN-9 IN-8
14 13 IN-11 IN-10 Capacitor
16 15
IN-11 IN-10 5V DC Power 0.01 µF Typical
16 15 IN-13 IN-12
(See notes below.)
IN-13 IN-12 18 17
18 17 IN-15 IN-14
IN-15 IN-14 20 19
20 19 DC-1(+) DC COM 1
DC-1(+) DC COM 1
IMPORTANT: I/O cables must be shielded type and cable length must be <10 m (32.8 ft)
Simplified Schematic for maximum EMI noise immunity.
+5 DC
1.5 K
1K 74HCT14
560
IN
DC INPUT
ST 0 1 2 3 4 5 6 7 O
ST 8 9 10 11 12 13 14 15K
1.5 K
1K 74HCT14
560
IN
DC COM
Certifications - 1756-IG16
Certification(1) 1756-IG16
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T5 X Gc
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IH16I
DC INPUT
ST 0 1 2 3 4 5 6 7 O
ST 8 9 10 11 12 13 14 15K
Certifications - 1756-IH16I
Certification(1) 1756-IH16I
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IH16ISOE
ST 0 1 2 3 4 5 6 7 O
ST 8 9 10 11 12 13 14 15 K
Certifications - 1756-IH16ISOE
Certification(1) 1756-IH16ISOE
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IM16I
L1
AC INPUT
ST 0 1 2 3 4 5 6 7 O
ST 8 9 10 11 12 13 14 15 K
Certifications - 1756-IM16I
Certification(1) 1756-IM16I
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IN16
+5V
IN-O 2 1
IN-1 IN-0
4 3
L2-0 L1
IN-3 IN-2
6 5
GND
IN-5 IN-4
L2 Group 0 8
Group 0
7
IN-7 IN-6
ControlLogix Display 10 9
Backplane L2-0 L2-0
Interface 12 11
IN-9 IN-8
14 13
IN-11 IN-10
Group 1 16 15 Group 1
IN-13 IN-12
AC INPUT 18 17
IN-15 IN-14
20 19
ST 0 1 2 3 4 5 6 7 O L2-1 L2-1
ST 8 9 10 11 12 13 14 15 K
Daisy Chain to
Other RTBs
Certifications - 1756-IN16
Certification(1) 1756-IN16
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T3 X Gc
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IR6I
2 1
IN-1/A IN-0/A
4 3
IN-1/B IN-0/B
6 5
RTN-1/C RTN-0/C
8 7 3-wire RTD
IN-3/A IN-2/A
10 9
IN-3/B IN-2/B
12 11
RTN-3/C RTN-2/C Shield Ground
14 13
Not used Not used
16 15
IN-5/A IN-4/A
18 17
IN-5/B IN-4/B
20 19
RTN-5/C RTN-4/C
2 1
IN-1/A IN-0/A
4 3
IN-1/B IN-0/B
6 5
RTN-1/C RTN-0/C
8 7 4-wire RTD
IN-3/A IN-2/A
10 9 ANALOG INPUT
IN-3/B IN-2/B
12 11
CAL
RTN-3/C RTN-2/C Shield Ground
14 13 OK
Not used Not used
16 15
IN-5/A IN-4/A
18 17
IN-5/B IN-4/B
20 19
RTN-5/C RTN-4/C
Certifications - 1756-IR6I
Certification(1) 1756-IR6I
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IRT8I
ControlLogix isolated RTD/Thermocouple analog input module.
CJC Sensor
Certifications - 1756-IRT8I
Certification(1) 1756-IRT8I
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
EN 61000-6-4; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 Gc X
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IR12
Certifications - 1756-IR12
Certification(1)
Description
(when product is marked)
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CE European Union 2004/108/EC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
• EN 61010-2-201; Control Equipment Safety Requirements
RCM Australian Radiocommunications Act, compliant with:
• EN 61000-6-4; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-0; General Requirements
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n" II 3 G Ex nA IIC T4 Gc DEMKO15ATEX1482X
IECEx IECEx System, compliant with:
• IEC 60079-0; General Requirements
• IEC 60079-15; Potentially Explosive Atmospheres, Protection "n" II 3 G Ex nA IIC T4 Gc IECEx UL 15.0053X
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
• Article 58-2 of Radio Waves Act, Clause 3
EAC Russian Customs Union TR CU 020/2011 EMC Technical Regulation
Russian Customs Union TR CU 004/2011 LV Technical Regulation
(1) See the Product Certification link at www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IT6I
2 1
+
IN-1 IN-0
4 3
Not Used Not Used
Cold 6 5
Junction
Sensor RTN-1 RTN-0
8 7 –
Lug
IN-3 IN-2
Thermocouple
ANALOG INPUT 10 9
CJC+ Not Used
CAL 12 11
RTN-3 RTN-2
OK 14 13
CJC- Not Used
16 15
One CJC, part number 94238301, is shipped with the module. A replacement can be ordered as
RP-94238301.
Certifications - 1756-IT6I
Certification(1) 1756-IT6I
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IT6I2
CJC– CJC+
RTN-0 IN-0
Analog Input
RTN-1 IN-1
RTN- IN-4
RTN-5 IN-5
CJC– CJC+
Cold Junction
Wire Spade Lug
Sensor
Two CJCs, part number 94286501, are shipped with the module. Replacements can be ordered as
RP-94286501.
Certifications - 1756-IT6I2
Certification(1) 1756-IT6I2
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IT16
Certifications - 1756-IT16
Certification(1) Description
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CE European Union 2004/108/EC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
• EN 61010-2-201; Control Equipment Safety Requirements
RCM Australian Radiocommunications Act, compliant with:
• EN 61000-6-4; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-0; General Requirements
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n" II 3 G Ex nA IIC T4 Gc DEMKO15ATEX1482X
IECEx IECEx System, compliant with:
• IEC 60079-0; General Requirements
• IEC 60079-15; Potentially Explosive Atmospheres, Protection "n" II 3 G Ex nA IIC T4 Gc IECEx UL 15.0053X
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
• Article 58-2 of Radio Waves Act, Clause 3
EAC Russian Customs Union TR CU 020/2011 EMC Technical Regulation
Russian Customs Union TR CU 004/2011 LV Technical Regulation
(1) When marked. See the Product Certification link at www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IV16
DC-0 + DC-0 +
ControlLogix Display 12 11
Backplane IN-9 IN-8
Interface 14 13
IN-11 IN-10
16 15
Group 1 IN-13 IN-12 Group 1
18 17
IN-15 IN-14
DC INPUT 20 19
DC-1 + DC-1 +
ST 0 1 2 3 4 5 6 7 O
ST 8 9 10 111213 1415 K
+ – DC COM
Certifications - 1756-IV16
Certification(1) 1756-IV16
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-IV32
ST 0 1 2 3 4 5 6 7 IN-31 34 33 IN-30
1 1 1 1 1 1 O DC-1 (+) 36 35 DC-1 (+)
ST 8 9 0 1 2 3 4 5
K
11 1 1 2 2 2 2
ST 6 7 8 9 0 1 2 3
22 2 2 2 2 3 3
ST 4 5 6 7 8 9 0 1
+ –
DC COM
Certifications - 1756-IV32
Certification(1) 1756-IV32
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OA8
L1-0 OUT-1
6 5
L1-0 OUT-3
ControlLogix Backplane Interface
10 9
Display Not Used
L1-0
12 11
18 17
L1-1 OUT-7
20 19
0 43 ms
Time
Daisy Chain to
Other RTBs
L1
AC OUTPUT
ST 0 1 2 3 4 5 6 7 O
K
Certifications - 1756-OA8
Certification(1) 1756-OA8
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OA8D
L1-0 OUT-3
Display Loss of Field Power
12 11
20 19
Continuous @ 30 °C (86 °F) L1-1 L2-1
1A
Continuous @ 60 °C (140 °F)
500 mA
L2
0 43 ms
Time Daisy Chain to
Other RTBs
L1
AC OUTPUT
ST 0 1 2 3 4 5 6 7 O
K
FLT 0 1 2 3 4 5 6 7
DIAGNOSTIC
On to Off 9.3 ms @ 60 Hz
11 ms @ 50 Hz
Current draw @ 5.1V 175 mA
Current draw @ 24V 250 mA
Total backplane power 6.89 W
Power dissipation, max 5.3 W @ 60 °C (140 °F)
Thermal dissipation 18.0 BTU/hr
Off-state leakage current, max 3 mA per point
On-state voltage drop, max 2.5V peak @ 0.5 A
3V peak @ 1 A
Current per point, max 1 A @ 30 °C (86 °F) linear derating
0.5 A @ 60 °C (140 °F) linear derating
Current per module, max 8 A @ 30 °C (86 °F) linear derating
4 A @ 60 °C (140 °F) linear derating
Surge current per point 8 A for 43 ms per point, repeatable every 2 s @ 30 °C (86 °F)
5 A for 43 ms per point, repeatable every 1 s @ 60 °C (140 °F)
Load current, min 10 mA per point
Scheduled outputs Synchronization within 16.7 s max, reference to the Coordinated System Time
States in Fault mode per point Hold last state, On or Off (Off is default)
States in Program mode per point Hold last state, On or Off (Off is default)
Isolation voltage 125V (continuous), basic insulation type, outputs-to-backplane, and output group-to-group
No isolation between individual group outputs
Routine tested @ 1200V AC for 2 s
Inhibit voltage, max Zero crossing 25V peak
Module keying Electronic, software configurable
Fusing Electronically fused per point
Removable terminal block 1756-TBNH
1756-TBSH
RTB keying User-defined mechanical
Slot width 1
Wire category 1(2)
North American temperature code T4A
Enclosure type None (open style)
(1) UL certification for 120V 50/60 Hz nominal. Rockwell Automation specified to 74…132V, 47…63 Hz.
(2) Use this conductor category information for planning conductor routing as described in the system-level installation manual. See the Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.
Certifications - 1756-OA8D
Certification(1) 1756-OA8D
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OA8E
L1-0 OUT-3
12 11
Surge Current Chart
Daisy L1-1 OUT-4
Chain to 14 13
Surge Other
20 A L1-1 OUT-5
RTBs
16 15
L1-1 OUT-6
Current
18 17
L2
0 43 ms Daisy Chain to
Time Other RTBs
L1
AC OUTPUT
ST 0 1 2 3 4 5 6 7 O
FUSE 0 1 2 3 4 5 6 7K
ELECTRONICALLY FUSED
On to Off 9.3 ms @ 60 Hz
11 ms @ 50 Hz
Current draw @ 5.1V 200 mA
Current draw @ 24V 250 mA
Total backplane power 7.02 W
Power dissipation, max 5.5 W @ 60 °C (140 °F)
Thermal dissipation 18.76 BTU/hr
Off-state leakage current, max 3 mA per point
On-state voltage drop, max 4V peak @ 2 A
Current per point, max 2 A @ 60 °C (140 °F)
Current per group, max 4 A @ 30 °C (86 °F) linear derating
2 A @ 60 °C (140 °F) linear derating
Current per module, max 8 A @ 30 °C (86 °F) linear derating
4 A @ 60 °C (140 °F) linear derating
Surge current per point 20 A for 43 ms per point, repeatable every 2 s @ 60 °C (140 °F)
Load current, min 10 mA per point
Scheduled outputs Synchronization within 16.7 s max, reference to the Coordinated System Time
States in Fault mode per point Hold last state, On or Off (default is Off)
States in Program mode per point Hold last state, On or Off (default is Off)
Isolation voltage 125V (continuous), basic insulation type, outputs-to-backplane, and output group-to-group
No isolation between individual group outputs
Routine tested @ 1200V AC for 2 s
Inhibit voltage, max Zero crossing 25V peak
Module keying Electronic, software configurable
Fusing Electronically fused per point
Removable terminal block 1756-TBNH
1756-TBSH
RTB keying User-defined mechanical
Slot width 1
Wire category 1(2)
North American temperature code T4A
Enclosure type None (open style)
(1) UL certification for 120V 50/60Hz nominal. Rockwell Automation specified to 74…132V, 47…63 Hz.
(2) Use this conductor category information for planning conductor routing as described in the system-level installation manual. See the Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.
Certifications - 1756-OA8E
Certification(1) 1756-OA8E
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OA16
L1-0 L2-0
12 11
OUT-0
OUT-9 OUT-8
ControlLogix Backplane Interface 14 13
OUT-11 OUT-10
16 15
5A
2A
500 mA
0 43 ms L1 L2
Time
AC OUTPUT
ST 0 1 2 3 4 5 6 7
FUSE O
K
ST 8 9 10 11 12 13 14 15
FUSE
On to Off 9.3 ms @ 60 Hz
11 ms @ 50 Hz
Current draw @ 5.1V 400 mA
Current draw @ 24V 2 mA
Total backplane power 2.1 W
Power dissipation, max 6.5 W @ 60 °C (140 °F)
Thermal dissipation 22.17 BTU/hr
Off-state leakage current, max 3 mA per point
On-state voltage drop, max 1.5V @ 0.5 A
5.7V @ load current < 50 mA
Current per point, max 0.5 A @ 60 °C (140 °F)
Current per group, max 2 A @ 60 °C (140 °F)
Current per module, max 4 A @ 60 °C (140 °F)
Surge current per point 5 A for 43 ms per point, repeatable every 2 s @ 60 °C (140 °F)
Surge current per group 15 A for 43 ms per point, repeatable every 2 s @ 60 °C (140 °F)
Load current, min 10 mA per point
Commutating voltage 4V/s for loads > 50 mA
0.2V/s for loads < 50 mA(2)
Scheduled outputs Synchronization within 16.7 s max, reference to the Coordinated System Time
States in Fault mode per point Hold last state, On or Off (Off is default)
States in Program mode per point Hold last state, On or Off (Off is default)
Isolation voltage 250V (continuous), basic insulation type, outputs-to-backplane, and output group-to-group
No isolation between individual group outputs
Routine tested @ 1400V AC for 2 s
Inhibit voltage, max Zero crossing 60V peak
Module keying Electronic, software configurable
Fusing Mechanically fused/group, 3.15 A @ 250V AC slow blow, 1500 A interruption current, Littelfuse p/n H2153.15
Removable terminal block 1756-TBNH
1756-TBSH
RTB keying User-defined mechanical
Slot width 1
Certifications - 1756-OA16
Certification(1) 1756-OA16
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OA16I
+5V 1756-OA161
L1-0
Isolated Wiring
L1-13 28 27 OUT-13
L1-14 30 29 OUT-14
Continuous @ 30 °C (86 °F)
2A L1-15 32 31 OUT-15
Continuous @ 60 °C (140 °F) L1
1A L1-15 34 33 Not Used
Not Used 36 35 Not Used
L2
0 43 ms
Time
AC OUTPUT
On to Off 9.3 ms @ 60 Hz
11 ms @ 50 Hz
Current draw @ 5.1V 300 mA
Current draw @ 24V 2.5 mA
Total backplane power 1.59 W
Power dissipation, max 5.5 W @ 60 °C (140 °F)
Certifications - 1756-OA16I
Certification(1) 1756-OA16I
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OB8
2A 18 17
DC-1 (+) OUT-7
20 19
RTN OUT-1 RTN OUT-1
0 10 ms
Time Daisy Chain to
Other RTBs
+ –
DC OUTPUT DC COM
ST 0 1 2 3 4 5 6 7 O
K
Certifications - 1756-OB8
Certification(1) 1756-OB8
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OB8EI
DC-0(+)
+
DC-0 (+) 2 1 OUT-0
Isolated - RTN OUT-0 4 3 OUT-0
OUT-0 Wiring
DC-1 (+) 6 5 OUT-1
RTN OUT-1 8 7 OUT-1
+
OUT-0 DC-2 (+) 10 9 OUT-2
- RTN OUT-2 12 11 OUT-2
Display RTN
Output 14 13
DC-3 (+) OUT-3
ControlLogix Backplane Interface Device OUT-0
RTN OUT-3 16 15 OUT-3
DC-4 (+) 18 17 OUT-4
Nonisolated RTN OUT-4 20 19 OUT-4
Surge Current Chart Wiring
DC-5 (+) 22 21 OUT-5
RTN OUT-5 24 23 OUT-5
Surge
4A DC-6 (+) 26 25 OUT-6
Daisy Chain to
Other RTBs RTN OUT-6 28 27 OUT-6
DC-7 (+) 30 29 OUT-7
Continuous @ 60 °C (140 °F) RTN OUT-7 32 31 OUT-7
Current
2A
Not Used 34 33 Not Used
Daisy Chain to
Other RTBs Not Used 36 35 Not Used
0 10 ms
Time
+ –
DC OUTPUT
DC COM
ST 0 1 2 3 4 5 6 7 O
FUSE 0 1 2 3 4 5 6 7 K
ELECTRONICALLY FUSED
Certifications - 1756-OB8EI
Certification(1) 1756-OB8EI
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OB8I
Other
2A RTBs
0 10 ms
Time
DC OUTPUT
ST 01234567 O
K
Certifications - 1756-OB8I
Certification(1) 1756-OB8I
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OB16D
2A
GND-1 32 31 OUT-15
Continuous @ 60 °C (140 °F) GND-1 34 33 Not Used
Not Used 36 35 Not Used
0 10 ms Daisy Chain
to Other RTBs
Time
+ – DC COM
DC OUTPUT
ST 0 1 2 3 4 5 6 7
O
FLT 0 1 2 3 4 5 6 7
K
ST 8 9 10 11 12 13 14 15
FLT 8 9 10 11 12 13 14 15
DIAGNOSTIC
Certifications - 1756-OB16D
Certification(1) 1756-OB16D
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OB16E
OUT-1 OUT-0
4 3
OUT-9 OUT-8
14 13
OUT-11 OUT-10
DC OUTPUT 16 15
ST 0 1 2 3 4 5 6 7 OUT-13 OUT-12
FUSE O Group 1 18 17 Group 1
K
ST 8 9 10 11 12 13 14 15 OUT-15 OUT-14
20 19
FUSE
ELECTRONICALLY FUSED
DC-1(+) RTN OUT-1
+ –
DC COM
Certifications - 1756-OB16E
Certification(1) 1756-OB16E
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OB16I
2A
Not Used 36 Not Used
35
DC(-)
1A Continuous @ 60 °C (140 °F)
ST 0 1 2 3 4 5 6 7 O
ST 8 9 10 11 12 13 14 15K
Certifications - 1756-OB16I
Certification(1) 1756-OB16I
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OB16IEF
ControlLogix DC (10…30V) electronically protected, sinking or sourcing, isolated, fast output module
DC OUTPUT
ST 01 2 3 4 56 7
DIAG 01 2 3 4 5 6 7 O
K
ST 8 9 10 11 12 13 14 15
DIAG 8 9 10 11 12 13 14 15
PEER DEVICE
Certifications - 1756-OB16IEF
Certification(1) 1756-OB16IEF
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OB16IEFS
ControlLogix DC (10…30V) scheduled, electronically protected, sinking or sourcing, isolated, fast output module
DC OUTPUT
ST 0 1 2 3 4 5 6 7
FLT 0 1 2 3 4 5 6 7 O
K
ST 8 9 10 11 12 13 14 15
FLT 8 9 10 11 12 13 14 15
SCHEDULED
Certifications - 1756-OB16IEFS
Certification(1) 1756-OB16IEFS
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OB16IS
ST 0 1 2 3 4 5 6 7 O
ST 8 9 10 11 12 13 14 15 K
Certifications - 1756-OB16IS
Certification(1) 1756-OB16IS
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OB32
DC COM
DC OUTPUT
ST 0 1 2 3 4 5 6 7
1 11 11 1 O
ST 8 9 0 12 3 4 5
K
1 1 1 12 22 2
ST 6 7 8 90 1 2 3
2 2 2 22 23 3
ST 4 5 6 78 9 0 1
Certifications - 1756-OB32
Certification(1) 1756-OB32
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T3 X Gc
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OC8
+5V 2 1
OUT-0 DC-0 (+) OUT-0
4 3
DC-0 (+) OUT-1
RTN OUT-0 Group 0 6 Group 0
5
DC-0 (+) OUT-2
ControlLogix Backplane Interface 8 7
DC-0 (+) OUT-3
Display
10 9
DC-1(+) OUT-4
Surge Current Chart
14 13
DC-1(+) OUT-5
Surge
4A Group 1 16 15 Group 1
DC-1(+) OUT-6
18 17
2A 20 19
RTN OUT-1 RTN OUT-1
Daisy Chain to
Other RTBs
0 10 ms + –
Time
DC COM
DC OUTPUT
ST 0 1 2 3 4 5 6 7 O
K
Certifications - 1756-OC8
Certification(1) 1756-OC8
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OF4
2 1 2 1 +
Not Used VOUT-0 i Not Used VOUT-0
4 3 4 3
• Place additional loop devices (such as strip chart recorders) at the A location noted All terminals marked RTN are connected internally.
in the drawing.
• All terminals marked RTN are connected internally.
ANALOG OUTPUT
CAL
OK
1756-TBSH
Single wire connection: 0.33…2.1 mm² (22…14 AWG) solid or stranded shielded copper wire, rated at 105 °C (221 °F)
or greater, 1.2 mm (3/64 in.) insulation max.
Do not wire multiple conductors on any terminal.
Terminal block torque specs 1756-TBNH: 1.36 N•m (12 lb•in)
(1)
Wiring category 1 - on signal ports
North American temp code T4A
ATEX temp code T4
IECEx temp code T4
Enclosure type None (open-style)
(1) Use this conductor category information for planning conductor routing. See the Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.
Certifications - 1756-OF4
Certification(1) 1756-OF4
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OF6CI
2 1 2 1
6 5 6 5
ANALOG OUTPUT
CAL
OK
Certifications - 1756-OF6CI
Certification(1) 1756-OF6CI
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OF6VI
Certifications - 1756-OF6VI
Certification(1) 1756-OF6VI
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OF8
2 1 2 1
+
VOUT-4 VOUT-0 i VOUT-4 VOUT-0
4 3 4 3
ANALOG OUTPUT
CAL
OK
1756-TBSH
Single wire connection, 0.33…2.1 mm² (22…14 AWG) solid or stranded shielded copper wire rated at
105 °C (221 °F), or greater, 1.2 mm (3/64 in.) insulation max.
Do not wire multiple conductors on any terminal.
Terminal block torque specs 1756-TBNH: 1.36 N•m (12 lb•in)
(1)
Wiring category 1 - on signal ports
North American temp code T4A
ATEX temp code T4
IECEx temp code T4
Enclosure type None (open-style)
(1) Use this Conductor Category information for planning conductor routing. See the Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.
Certifications - 1756-OF8
Certification(1) 1756-OF8
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
CE European Union 2014/30/EU EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2014/35/EU LVD, compliant with:
• EN 61010-2-201; Control Equipment Safety Requirements
RCM Australian Radiocommunications Act, compliant with:
EN 61000-6-4; Industrial Emissions
Ex European Union 2014/34/EU ATEX Directive, compliant with:
• EN 60079-0; General Requirements
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• DEMKO15ATEX1482X
IECEx IECEx System, compliant with:
• IEC 60079-0; General Requirements
• IEC 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• IECEx UL 15.0053X
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
EAC Russian Customs Union TR CU 020/2011 EMC Technical Regulation
Russian Customs Union TR CU 004/2011 LV Technical Regulation
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OF8H
1756-OF8H
ANALOG OUTPUT
CAL
OK
HART
1756-TBSH
Single wire connection: 0.33…2.1 mm² (22…14 AWG) solid or stranded shielded copper wire, rated at 105 °C (221 °F)
or greater, 1.2 mm (3/64 in.) insulation max
Terminal block torque specs 1756-TBNH 1.36 N•m (12 lb·in)
Wire category(1) 2 - on signal ports
Wire type Copper
North American temp code T4
ATEX temp code T4
IECEx temp code T4
Enclosure type rating None (open-style)
(1) Use this Conductor Category information for planning conductor routing. See the Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.
Certifications - 1756-OF8H
Certification(1) 1756-OF8H
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CE European Union 2014/30/EU EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
RCM Australian Radiocommunications Act, compliant with:
EN 61000-6-4: Industrial Emissions
Ex European Union 2014/34/EU ATEX Directive, compliant with:
• EN 60079-0; General Requirements
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• DEMKO12ATEX1219040X
IECEx IECEx System, compliant with:
• IEC 60079-0; General Requirements
• IEC 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• IECEx UL 16.0109X
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
EAC Russian Customs Union TR CU 020/2011 EMC Technical Regulation
Russian Customs Union TR CU 004/2011 LV Technical Regulation
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OF8I
ST O
K
FLT
Certifications - 1756-OF8I
Certification(1) 1756-OF8I
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
EN 61000-6-4; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 Gc X
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OF8IH
XMTR2
Not used 2 1 Not used
ANALOG OUTPUT
IOUT0 4 3 IOUT1
RTN0 6 5 RTN1
Not used 8 7 Reserved CAL
Not used 10 9 Reserved
IOUT2 12 11 IOUT3 OK
RTN2 14 13 RTN3
Not used 16 15 Not used HART
Not used 18 17 Not used
IOUT4 20 19 IOUT5
RTN4 22 21 RTN5
Not used 24 23 Not used
Not used 26 25 Not used
IOUT6 28 27 IOUT7
RTN6 30 29 RTN7
Not used 32 31 Not used
Not used 34 33 Not used
Not used 36 35 Not used
1756-TBS6H
Single wire connection: 0.33…2.1 mm² (22…14 AWG) solid or stranded shielded copper wire, rated at 105 °C (221 °F)
or greater, 1.2 mm (3/64 in.) insulation max
Terminal block torque specs 1756-TBCH 0.5 N•m (4.4 lb•in)
Wiring category(1) 2 - on signal ports
Wire type Copper
North American temp code T4A
ATEX temp code T4
IECEx temp code T4
Enclosure type rating None (open-style)
(1) Use this Conductor Category information for planning conductor routing. See the Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.
Certifications - 1756-OF8IH
Certification(1) 1756-OF8IH
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CE European Union 2014/30/EU EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A and B)
European Union 2014/35/EU LVD, compliant with:
• EN 61131-2; Programmable Controllers (Clause 11)
RCM Australian Radiocommunications Act, compliant with:
EN 61000-6-4; Industrial Emissions
Ex European Union 2014/34/EU ATEX Directive, compliant with:
• EN 60079-0; General Requirements
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• DEMKO14ATEX1238X
IECEx IECEx System, compliant with:
• IEC 60079-0; General Requirements
• IEC 60079-15; Potentially Explosive Atmospheres, Protection "n"
• II 3 G Ex nA IIC T4 Gc
• IECEx UL 16.0110X
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
EAC Russian Customs Union TR CU 020/2011 EMC Technical Regulation
Russian Customs Union TR CU 004/2011 LV Technical Regulation
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OG16
OUT-1 Power –
OUT-0 OUT-1 OUT-0
4 3 4 3
OUT-3 OUT-2 OUT-3 OUT-2
+5 V DC 6 5 6 5
OUT-5 OUT-4 OUT-5 OUT-4
8 7
8 7
OUT-7 OUT-6
OUT-7 OUT-6
10 9
+ I/O Wire 10 9
+ DC DC-0(+) DC COM 0 DC-0(+)
12 11 DC COM 0
12 11
OUT-9 OUT-8 –
14 13 TTL OUT-9 OUT-8
14 13
OUT-11 OUT-10 Output
16 15 Device OUT-11 OUT-10
16 15
OUT-13 OUT-12 Capacitor
18 17 0.01 µF Typical OUT-13 OUT-12
OUT-15 OUT-14 (See notes below.) 18 17
20 19 OUT-15 OUT-14
DC-1(+) DC COM 1 20 19
DC-1(+) DC COM 1
Simplified Schematic
IMPORTANT: I/O cables must be shielded type and cable length must be
+5 DC
<10 m (32.8 ft) for maximum EMI noise immunity.
74AC14
OUT
DC OUTPUT
ST 0 1 2 3 4 5 6 7 O
ST 8 9 10 11 12 13 14 15 K
74AC14
OUT
DC COM
Certifications - 1756-OG16
Certification(1) 1756-OG16
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T5 X Gc
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OH8I
DC OUTPUT
ST 0 1 2 3 4 5 6 7 O
K
Certifications - 1756-OH8I
Certification(1) 1756-OH8I
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-ON8
2 1
L1-0 OUT-0
4 3
L1-0 OUT-1
OUT-0 6 5
Group 0 L1-0 OUT-2 Group 0
ControlLogix Backplane Interface
8 7
L1-1 OUT-5
Current
16 15
Group 1 Group 1
L1-1 OUT-6
18 17
2A L1-1 OUT-7
20 19
L1
AC OUTPUT
ST 0 1 2 3 4 5 6 7 O
K
On to Off 9.3 ms @ 60 Hz
11 ms @ 50 Hz
Current draw @ 5.1V 200 mA
Current draw @ 24V 2 mA
Total backplane power 1.07 W
Certifications - 1756-ON8
Certification(1) 1756-ON8
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OV16E
OUT-3 OUT-2
OUT-0 6 5
Group 0 OUT-5 OUT-4 Group 0
8 7
1A
0 10 ms + –
Time
DC COM
Daisy Chain to Other RTBs Daisy Chain to Other RTBs
DC OUTPUT
ST 0 1 2 3 4 5 6 7
FUSE O
K
ST 8 9 10111213 1415
FUSE
ELECTRONICALLYFUSED
Certifications - 1756-OV16E
Certification(1) 1756-OV16E
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OV32E
1A
+ _
0 10 ms
Time DC COM
DC OUTPUT
ST 0 1 2 3 4 5 6 7 F
0
1 1 1 11 1
ST 8 9 0 1 2 3 4 5 O
1 1 1 1 2 22 2 K
ST 6 7 8 9 0 1 2 3
2 2 2 2 2 23 3 F
ST 4 5 6 7 8 9 0 1 1
ELECTRONIC FUSING
Certifications - 1756-OV32E
Certification(1) 1756-OV32E
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OW16I
Certifications - 1756-OW16I
Certification(1) 1756-OW16I
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-OX8I
Certifications - 1756-OX8I
Certification(1) 1756-OX8I
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
FM FM Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous Locations
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-CFM
2 1 2 1
Z0 12-24V DC Z1 12-24V DC Z0 12-24V DC Z1 12-24V DC
4 3 4 3
Z0 5V DC Z1 5V DC Z0 5V DC Z1 5V DC
6 5
6 5
Z0 Return Z1 RET Z0 Return Z1 RET
8 7
8 7
F0 F1
+ F0 F1
Input 10 9
Device 10 9
– F0 Return F1 Return
F0 Return F1 Return
12 11
12 11
Not Used Not Used
Not Used Not Used
Shield 14 13
14 13 Not Used Not Used
Ground
Not Used Not Used
16 15
16 15 Output 0 Output 1
Output 0 Output 1 18 17
18 17 Customer VCC Customer
Customer VCC Customer Common
+ 20 19 +
Common
20 19 Customer VCC Customer
Customer Load Common Load
Customer VCC
Common
– –
+
–
This wiring diagram can be used in applications with 50 mV (magnetic pickup), 1.3V (TTL), or 4V
(preamp level) thresholds. You must use RSLogix 5000® software to choose the appropriate
threshold level for your specific application.
The 1756-CFM module provides Totalizer mode for metering applications, or high-speed frequency measurements for
speed or rate control applications, on two channels connected to flowmeters.
12-24V DC 2 1
+ Z1 12-
Z0 12-24V DC
24V DC
– 4 3
Z0 5V DC Z1 5V DC
6 5
Shield Ground Z0 Return Z1 RET
8 7 METERING
+ F0 F1
Input F Z F Z
Device 10 9 0 0 1 1
– O
F0 Return F1 Return K
O O
12 11
0 1
Shield Ground Not Used Not Used
14 13 DC I/O
Not Used Not Used
16 15
Output 0 Output 1
18 17
Customer VCC Customer
Common
20 19
Customer VCC Customer
Common
Certifications - 1756-CFM
Certification(1) 1756-CFM
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-HSC
The 1756-HSC module provides four high-speed, output-switching, on-off windows. The module uses pulses for
counting and frequency.
Certifications - 1756-HSC
Certification(1) 1756-HSC
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-LSC8XIB8I
Current Limiter
IN-x or CTR-x Opto-isolator Display
ControlLogix Backplane Interface
GND-0 2 1 IN-0
DC-1 (-) GND-1 4 3 IN-1 DC-1 (+)
DC-2 (-) GND-2 6 5 IN-2 DC-2 (+)
GND-3 8 7 IN-3
Source Input Wiring GND-4 10 9 IN-4
DC-5 (-) GND-5 12 11 IN-5 (+) DC-5 (+)
DC-6 (-) GND-6 14 13 IN-6 (+) DC-6 (+)
GND-7 16 15 IN-7
Jumper Bar Cut to Length CTR-GND-0 18 17 CTR-0
CTR GND-1 Sink Input Wiring
20 19 CTR-1
CTR GND-2 22 21 CTR-2
CTR GND- 3 24 23 CTR-3
Nonisolated Wiring CTR GND-4 26 25 CTR-4 See page 231 for proximity
CTR GND- 5 28 27 CTR-5 sensor wiring.
CTR GND-6 30 29 CTR-6
CTR GND- 7 32 31 CTR-7
DC (-) CTR GND-7 34 33 Not Used DC (+)
Not Used 36 35 Not Used
COUNTER
ST 01234567 O
K
CTR 01234567
PEER DEVICE
The following diagram shows how to wire a proximity sensor to the module’s eight counters or eight hardware inputs.
Counters use incoming pulses for counts and frequency with two user-configurable On/Off windows per counter.
Hardware inputs provide standard input or counter-control functionality.
Brown Black
12…24V DC
Blue
12…24V DC Return GND-0 2 1 IN-0
GND-1 4 3 IN-1
GND-2 6 5 IN-2
GND-3 8 7 IN-3 Counter Control Hardware
GND-4 10 9 IN-4 Inputs 0…7
GND-5 12 11 IN-5
Allen-Bradley Bulletin 872 3-wire DC Proximity
GND-6 14 13 IN-6
Sensor—Normally Open NPN
GND-7 16 15 IN-7
CTR-GND-0 18 17 CTR-0
CTR GND-1 20 19 CTR-1
Brown CTR GND-2
12…24V DC 22 21 CTR-2
CTR GND- 3 24 23 CTR-3 Counters 0…7
CTR GND-4 26 25 CTR-4
Blue Black CTR GND- 5 28 27 CTR-5
12…24V DC Return CTR GND-6 CTR-6
30 29
CTR GND- 7 32 31 CTR-7
CTR GND-7 34 33 Not Used
Not Used 36 35 Not Used
Module Source Input Wiring
Certifications - 1756-LSC8XIB8I
Certification(1) 1756-LSC8XIB8I
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
KC Korean Registration of Broadcasting and Communications Equipment, compliant with Article 58-2 of Radio Waves Act, Clause 3
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
1756-PLS
INPUT 6
+ OUTPUT 14 INPUT 14
OUTPUT 6
18 17 18 17
The 1756-PLS module supports enhanced packaging applications. The module requires three contiguous slots in the
chassis.
1756-PLS Resolver
2 1
Indicator for Left Slot I/O Module Indicator for Left Resolver Module Indicator for Right Slot I/O Module
OUT 0 1 2 3 4 5 6 7 OUT 8 9 10 11 12 13 14 15
O O O
IN 0 1 2 3 4 5 6 7 K K IN 8 9 10 11 12 13 14 15 K
Certifications - 1756-PLS
Certification(1) 1756-PLS
UL UL Listed Industrial Control Equipment. See UL File E65584.
CSA CSA Certified Process Control Equipment. See CSA File LR54689C.
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.
CE European Union 2004/108/IEC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 X Gc
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
• For more information on chassis specifications, see ControlLogix Chassis Specifications Technical Data,
publication 1756-TD006.
• For more information on power supply specifications, see ControlLogix Power Supply Specifications Technical
Data, publication 1756-TD005.
• For more information on how to choose the right power supply for your application, see the additional product
documentation, for example, a user manual, for your 1756 ControlLogix I/O module.
ATTENTION: If separate power sources are used, do not exceed the specified isolation voltage: referring to the specifications for
each individual module on the preceding pages.
Wiring Systems
As an alternative to buying RTBs and connecting the wires yourself, you can buy a wiring system of the following:
• Interface modules (IFMs) that provide the output terminal blocks for digital I/O modules. Use the pre-wired
cables that match the I/O module to the IFM.
• Analog interface modules (AIFMs) that provide the output terminal blocks for analog I/O modules. Use the pre-
wired cables that match the I/O module to the AIFM.
• I/O module-ready cables. One end of the cable assembly is an RTB that plugs into the front of the I/O module.
The other end has individually color-coded conductors that connect to a standard terminal block.
Connector
Additional Resources
These documents contain additional information concerning related products from Rockwell Automation.
Resource Description
ControlLogix System User Manual, publication 1756-UM001 Provides information on how to use a ControlLogix system.
ControlLogix 5580 Controllers User Manual, publication 1756-UM543 Provides information on how to use a ControlLogix 5580 controllers.
Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1 Provides general guidelines for installing a Rockwell Automation industrial system.
Product Certifications website, http://www.ab.com Provides declarations of conformity, certificates, and other certification details.
Product Compatibility and Download Center Get help determining how products interact, check www.rockwellautomation.com/global/support/pcdc.page
features and capabilities, and find associated
(PCDC) firmware.
Documentation Feedback
Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this document, complete the
How Are We Doing? form at http://literature.rockwellautomation.com/idc/groups/literature/documents/du/ra-du002_-en-e.pdf.
Rockwell Automation maintains current product environmental information on its website at http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page.
Allen-Bradley, ControlLogix, LISTEN.THINK.SOLVE, Rockwell Automation, Rockwell Software, and RSLogix 5000 are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400