Professional Documents
Culture Documents
Congratulations on purchasing your new RS DVR. Internal Connections OSD Main Menu Date / Time Setting
We hope that this Quick Setup Guide will help you quickly setup CH1 CH2
CH1
CH3
CH2
CH4
7 G • To enter the main menu, press the SETUP button • Select SYSTEM tab from the main menu.
and configure your new Speco Technologies DVR.
CH3 CH4 S1 N S3 A D+
D
on the remote control or right click on the mouse and • Select Date & Time Setup.
ETHERNET
2 6
1 3 10
5 9
Thank you! select SETUP from the submenu. • Adjust the date & time settings.
8
• The new date/time settings will take effect after the
G
D4RS/D4WRS
admin and password is 1111. settings are saved and the unit reboots.
DVR Unit
• It is strongly suggested to change the password to prevent
(D4WRS* / D8WRS* / D16WRS* or 5 6
8
unauthorized access.
Recording Setup
D4RS / D8RS / D16RS) 1 2
9
10
3 4
D8RS/D8WRS
5 6
7 8 10
1 2 9
3 4
Remote Control
D16RS/D16WRS
PTZ Camera Setup Connect the DVR via Web-Browser Viewer Mobile View Software Connect the DVR via SpecoTech
Setup Requirements Multi-Client Viewer Software
• Connect the RS-485 cables of PTZ camera • Make sure PC is connected to the Internet. The RS provides mobile surveillance software for the
to the RS-485 port on the rear panel. • Make sure DVR is already setup following the Network iPhone® , iPad® and the Android™.
Setup steps.
iPhone® / iPad®
Internet Settings
• Search for ‘Speco Player’ in the Apple App Store
• Start Internet Explorer; go to ‘Tools’ → ‘Internet
and install the app.
Options’ → ‘Security’ tab.
• Select ‘Trusted sites’ and click ‘Sites’ to specify its
security setting.
• Uncheck ‘Require server verification (https:) for all sizes
in this zone”. Enter the IP address of the DVR in this
field and click ‘Add’ to add this website to the zone.
• In the Security Level area, click ‘Custom Level’. Under
‘ActiveX controls and plug-ins’, set all items to ‘Enable’
• In the SETUP menu, select the DEVICE tab and click
or ‘Prompt’.
on CONTROLLER & PTZ.
• Click ‘OK’ to accept the settings and close the ‘Security
• Set the channel, name, speed and ID on the PTZ setup
Settings’ screen.
screen. SpecoTech Multi-Client Viewer Software is a multiple
• Right click on the PTZ channel and click on PTZ from Obtain Network Information of the DVR site monitoring client software that allows streaming of
the Sub Menu. video and audio, and transmission of alarm signals from
the DVRs over the network. The SpecoTech Multi-Client
can display up to 16 DVRs and supports dual monitors.
Network Setup PTZ camera control is also supported by this software.
• Press (+) on the upper right and enter site information. By attaching a microphone and speaker system to
• Click SAVE to save the site information. devices on site, the user may make bi-directional audio
• Select the saved site from “Devices” communication over the network.
• Select a channel(s) to view.
• Select Playback/Live then click CONNECT Refer to the complete manual for more information.
12-785