Professional Documents
Culture Documents
COPY QUALITY
Note: This copy intended as master of original
SYMPTOM:
Not all of the ink is supplied from the ink cartridge.
MECHANICAL
CAUSE:
Valve
The small ball, which is used as a valve, is not pushed back Spring Added
properly.
Socket
PRODUCTION COUNTERMEASURE:
ELECTRICAL
A spring has been added inside the ink pump to ensure the ball is pushed back as it should be.
REFERENCE
PART NUMBER DESCRIPTION QTY PAGE ITEM
C2244715 Pump Spring - 13mm 1 41 27*
PAPER PATH
C2004827 Packing 1 41 28*
C2004826 Pump Rubber 1 41 25
* DENOTES NEW ITEM
UNITS AFFECTED:
All VT2105 Priports manufactured from December ’95 (C321512XXXX) will have the Pump Spring added
FSM
during production.
FIELD COUNTERMEASURE:
Install the Pump Spring (C2244715) after removing the socket (2 screws). PARTS
NOTE: 1. When you remove the socket, ink will leak out. Make
sure to place absorbent material under the work area
prior to disassembling the ink pump.
2. There is a packing (gasket) (C2004827) between the
socket and the housing (see illustration above). If it is
damaged, you may need to replace the packing,
however, this normally is not necessary.
OTHER