Professional Documents
Culture Documents
Choice board
SkinPress FITTINGS
GOOD REASONS COMPLEMENTARY Geometry* 14 16 18 20 26 32 40 50 63
1 EFFECTIVENESS: suitable for all • Proven technology, ideal for new construction and renovation Threaded elbow, male • • • • • • • - -
Coupling • •X • •X •X •X • • •
configurations • To complement or replace traditional techniques
Threaded coupling, female • • • • • • • • •
With multiconnect, you choose the material that’s best for your • Implementation that’s always professional, faster and more
Threaded coupling, male • • • • • • • • •
work sites: synthetic, carbon/stainless steel, or copper. Our couplings secure, for long-lasting and effective site-wide installations
allow you to go from one material to another with ease. that meet new requirements for economic and environmental Mini Ball valve - • • • • - - - -
performance Tee • •X • •X •X •X • • •
PEX Threaded tee, female • • • • • • • • -
Threaded tee, male - • - • • • • - -
*other products are available - • : Brass - X : PPSU
SkinPress MultiSkin PIPES, PEX / AL / PEX (Aluminium layer of 0.4 mm for 16 mm diameter)
Press-fittings and multi-layer pipes
Outer diameter 14 16 18 20 26 32 40 50 62
Multi-layer Copper
Naked pipes in bar 5m 3/5m 5m 3/5m 3/5m 3/5m 5m 5m 5m
Naked pipes in coil 100 m 100 / 200 m 100 m 100 m 50 m 50 m - - -
Corrugated 100 m 50 / 100 m 100 m 50 m 50 m 50 m - - -
Insulated 6 mm 100 m 100 m 50 m 50 m 50 m 25 m - - -
Multiconnect adaptors, a COMAP exclusive solution
Insulated 10 mm 50 m 50 m 50 m 50 m 25 / 50 m 25 m - - -
SudoPress
Press-fittings for copper pipes COMAP: FROM GENERATOR TO EMITTER,
3 QUALITY: for secure, long-lasting
installations COMPLETE SOLUTIONS FOR ENERGY EFFICIENCY
The products in our multiconnect range are manufactured in our
For more than 60 years, COMAP has been building expertise in plumbing products and systems are developed and manufactured in Europe, in the
European factories, in France, Belgium and Italy, all of which are ISO
and climate-control systems. Connection and control solutions by COMAP Group’s design offices and factories in France and Italy.
9001 certified (ISO 14001, as well, in some cases). Because we have
reduce overall energy consumption in buildings while optimising comfort
complete control over our materials and design, you can work with COMAP is a French industrial group operating internationally. It has a
and safety. COMAP also markets water-treatment products.
confidence in our totally dependable products. sales network in more than 20 countries, employs 1,000 people and since
The COMAP Group is the only large-scale designer and manufacturer 2006 it has been part of the Aalberts Industries Group (AI) NV, which had
able to offer all thermal generator-emitter interface solutions. Our a turnover of 2.025 billion euros in 2012 (2012 annual report).
Tectite
Push-fittings for copper and carbon steel pipes
GARANTIE 10 ANS
4
COMAP Group
SERVICE: made-to-measure support for 16 avenue Paul Santy - BP 8211
your projects 69355 Lyon cedex 08 - France www.comap.fr
+33 (0)4 78 78 16 00 www.aalberts.nl
• A network of distribution partners near you
• A technical hotline at your service comap-group.com
Process water
BENDING AND SHAPE RETENTION
Vacuum for more effective work
SAVE TIME AND MONEY Multi-layer piping stands out from copper
Compressed air (oil < 25 mg/m3) • Fewer connections: on average, half as many fittings as with a metal system and steel because of its flexibility. The
• Less risk of theft: on average, multi-layer piping is a third as expensive as copper piping An accomplished design that
pipes are simple and pleasant to work with,
• Speed: a press-fit connection can be made in less than 7 seconds allows oring endomagement and they retain their shape after bending.
Gas This shape retention offers two big
advantages:
* Numerous other applications are available by request
+ HIGH-PERFORMANCE • It simplifies and speeds up installation of pipes.
• It limits cutting, meaning you use fewer fittings to connect pipes
• Multi-layer butt-welded pipe (5 layers)
For its multi-layer piping together.
• Low linear expansion
systems (MultiSkin and Tin plated fittings: prevents
Visualisation • Excellent noise attenuation
BetaSkin) and fittings of tube insertion corrosion in embedded
installations • TH profile, compatible with the main
(SkinPress), COMAP
crimping tools
+ SAFE
Visu-Control Ring:
GARANTIE 10 ANS
offers a manufacturer’s crimping visual indicator Patented Oring:
prevents overlooking
guarantee of 10 years for all ensures correct positioning of
• Highly secure installation: no flame or smoke
press tool unpressed fittings
incidents in which it is responsible. • Dielectric protection: insulation between the
For more information on the terms aluminium and the fitting SkinPress fittings with M22 connec-
of the guarantee, please refer to the • Visu-control: press-fitting indicator that tions, a solution system exclusive to
COMAP guarantee conditions. assures correct positioning of the press tool COMAP bythat allows the integration
COMAP
WIDE RANGE
• Multilayer press-fittings, available in brass and PPSU
• Patented Oring: shows when a fitting is
forgotten leplus of heating pipes into the multi-layer
system.
• Multilayer pipes, available in 2 versions: MultiSkin (PEX / AL / PEX - alu 0.4 mm) - BENEFITS
Stainless-steel sluve for strong
BetaSkin (PE-RT / AL / PE-RT - alu 0.2 mm) corrosion resistance • Quick implementation at the work site
• Economy
• Aesthetics