Professional Documents
Culture Documents
Design
The one-way flow control valve is screwed to a universal plate. The component is fitted onto the slotted profile plate using the locking system
with the blue lever (fitting version "A"). The component can be moved in the direction of the slot.
Function
The one-way flow control valve consists of a combination of flow control valve and non-return valve. The non-return valve closes the flow of
air in one direction. This causes the air to flow through the flow control valve. The restrictor cross section can be adjusted using a knurled
screw. The setting can be fixed using a knurled nut. The direction of flow control is identified by two arrows on the housing. In the other
direction the air flows freely through the non-return valve.
Technical data
Pneumatic components
Standard nominal flow rate against flow control 100 – 110 l/min
direction
Subject to change