Professional Documents
Culture Documents
Motor Handbook V31a-Edit 2-1
Motor Handbook V31a-Edit 2-1
Table of Contents
Introduction.................................... 1 Upper Watermelon Mill Dimensional Data........................ 12
Features/Benefits .......................... 2 Dimensional Data Reaming Watermelon Mill
Whipstock System Service Units... 3 Drawing No. 961-978-00P01 ...... 8 Dimensional Data
Maintenance Instructions............... 3 Dimensional Data Drawing No. 940-691-00P02.... 13
Lower Watermelon Mill Drawing No. 961-978-00P02 ...... 9 Dimensional Data........................ 14
Dimensional Data Dimensional Data ........................ 10 Dimensional Data
Drawing No. E01-151-00P01 ...... 4 Full Cut Watermelon Mill Drawing No. 945-249-00P02.... 17
Dimensional Data Dimensional Data Dimensional Data........................ 18
Drawing No. E01-151-00P02 ...... 5 Drawing No. 961-957-00P03 .... 11
Dimensional Data .......................... 6
Introduction
There are four types of Watermelon Mills listed in this Service Unit.
• Lower Watermelon Mills (Product Family H15170) are used to ream the top of the casing exit to
provide maximum clearance for passing equipment through the window.
• Upper Watermelon Mills (Product Family H15109) primary purpose is to keep the Window Mill on the
whipstock as long as possible.
• Full Cut Watermelon Mills (Product Family H15146) combines the features of the Lower and Upper
Watermelon Mills into one mill.
• Reaming Watermelon Mills (Product Family H15109) also known as Type E mills are used to dress
the casing exit to remove possible obstructions in the window.
Features/Benefits
• Dressed with durable Superloy Cutting
Structure
• Mill Body has flex section to reduce stress on
connections
H151-70-0054 7.75 4.000 3.470 3.125 0.360 1.362 54.8 FOR THIS SIZE 2.375 REG Box H0E-01673-04
MILL
H151-70-0055 5.00 99.00 8.22 46.54 4.125 3.595 2.750 3.125 0.423 1.595 55.2 H0E-01673-05 H0E-01651-00
H151-70-0056 8.69 4.250 3.720 1.00 0.485 1.829 55.7 5 H0E-01673-06
H151-70-0001 4.375 3.845 0.360 1.344 H0E-01155-01
8.0 23.5 10.4
H151-70-0002 4.500 3.970 0.423 1.579 0.50 H0E-01155-02
5.50
or sold, either alone or in conjunction with equipment or product. © 5/30/07 Baker Hughes Incorporated.
with the purpose of the document, without the written consent of Baker Hughes. This document is not rented, loaned
Hughes on request and may not be reproduced, used or disclosed to persons not having a need to know consistent
revealed for limited purposes only. This document is the property of Baker Hughes and is to be returned to Baker
This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is
Dimensional Data
Refer to Drawing Nos. E01-151-00P01 and E01-151-00P02. (Continued)
Blade Body
Material No. Csg OD A B C D1 D2 D3 D4 D5 D6 E F G H J K L M N P Q
Material No. Material. No.
H151-70-0024 7.000 6.345 0.423 1.579 H0E-01155-20
H151-70-0025 9.0 7.125 6.470 0.485 1.810 28.3 0.50 11.5 H0E-01155-21
H151-70-0026 7.250 6.595 0.548 2.045 NC-46 H0E-01155-22
H151-70-0027 8.63 18.78 7.375 6.720 5.500 5.75 5.50 0.610 2.277 (4.00 IF) H0E-01155-23 H09-47069-00
0.75
THIS DOCUMENT IS FOR INTERNAL USE ONLY
5.50 2.875
H151-09-4603 4.625 4.095 0.485 H09-61975-02
57.0 15.0 3.125 3.13 1.00 3.13 33.5 6 20.3 10º PAC DSI H09-44523-00
THIS DOCUMENT IS FOR INTERNAL USE ONLY
9.50
7.77
F
48.21
89.72
86.82
E
3.125
7.750
6.375
D6
Refer to Drawing No. 961-957-00P03.
Full Cut Watermelon Mill
1.00
3.50
2.25
D5
Dimensional Data
3.125
6.375
7.750
D4
3.125
5.750
9.750
D3
11.550
3.971
7.845
D2
12.250
4.500
8.500
D1
13.00
17.00
16.00
C
24.36
39.28
34.64
B
13.375 148.00
9.625 116.00
5.500 67.70
Csg OD A
H151-46-B000
H151-46-5000
H151-46-7000
Material No.
THIS DOCUMENT IS FOR INTERNAL USE ONLY
Unit No. SU 10564 This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is
revealed for limited purposes only. This document is the property of Baker Hughes and is to be returned to Baker
May 30, 2007 Hughes on request and may not be reproduced, used or disclosed to persons not having a need to know consistent
with the purpose of the document, without the written consent of Baker Hughes. This document is not rented, loaned
Page 12 of 18 Rev. A or sold, either alone or in conjunction with equipment or product. © 5/30/07 Baker Hughes Incorporated.
Dimensional Data Drawing No. 940-691-00P02
Reaming Watermelon Mill THIS DOCUMENT IS FOR INTERNAL USE ONLY
This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is Unit No. SU 10564
revealed for limited purposes only. This document is the property of Baker Hughes and is to be returned to Baker
Hughes on request and may not be reproduced, used or disclosed to persons not having a need to know consistent May 30, 2007
with the purpose of the document, without the written consent of Baker Hughes. This document is not rented, loaned
or sold, either alone or in conjunction with equipment or product. © 5/30/07 Baker Hughes Incorporated. Rev. A Page 13 of 18
1.00
'K'
J Pin
3.125
Refer to Drawing No. 940-691-00P02.
G
Reaming Watermelon Mill
Dimensional Data
3.125
3.313
3.563
3.688
3.810
3.828
3.937
4.063
4.188
4.313
F
3.750
3.875
4.125
4.250
4.375
4.390
4.500
4.625
4.750
4.875
E
45.00
D
C
12.00
B
47.50
A
H151-09-3705
H151-09-3706
H151-09-3920
H151-09-3921
H151-09-4103
H151-09-4104
H151-09-4205
H151-09-4206
H151-09-4301
H151-09-4302
H151-09-4303
H151-09-4304
H151-09-4505
H151-09-4506
H151-09-4604
H151-09-4605
H151-09-4709
H151-09-4710
H151-09-4805
H151-09-4806
Material No.
THIS DOCUMENT IS FOR INTERNAL USE ONLY
Unit No. SU 10564 This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is
revealed for limited purposes only. This document is the property of Baker Hughes and is to be returned to Baker
May 30, 2007 Hughes on request and may not be reproduced, used or disclosed to persons not having a need to know consistent
with the purpose of the document, without the written consent of Baker Hughes. This document is not rented, loaned
Page 14 of 18 Rev. A or sold, either alone or in conjunction with equipment or product. © 5/30/07 Baker Hughes Incorporated.
Reaming Watermelon Mill
or sold, either alone or in conjunction with equipment or product. © 5/30/07 Baker Hughes Incorporated.
with the purpose of the document, without the written consent of Baker Hughes. This document is not rented, loaned
Hughes on request and may not be reproduced, used or disclosed to persons not having a need to know consistent
revealed for limited purposes only. This document is the property of Baker Hughes and is to be returned to Baker
This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is
Dimensional Data
Refer to Drawing No. 940-691-00P02. (Continued)
Material No. A B C D E F G H Box J Pin 'K'
H151-09-5301 54.00 15.00 50.25
5.375 4.690
H151-09-5302
H151-09-5503 48.00 12.50 12.55 44.25 5.500 4.815
H151-09-5602 5.625 4.937
THIS DOCUMENT IS FOR INTERNAL USE ONLY
3.50
'K'
J Pin
6.75
7.75
G
Reaming Watermelon Mill
Dimensional Data
10.070
10.190
11.440
11.560
11.690
8.810
8.950
9.070
9.190
9.820
9.940
F
10.500
10.625
10.750
10.875
12.125
12.250
12.375
9.500
9.625
9.750
9.875
E
67.25
67.00
D
16.25
14.00
C
19.00
23.00
B
72.00
A
H151-09-9501
H151-09-9601
H151-09-9701
H151-09-9801
H151-09-1001
H151-09-1003
H151-09-1005
H151-09-1007
H151-09-1203
H151-09-1202
H151-09-1205
Material No.
THIS DOCUMENT IS FOR INTERNAL USE ONLY
Unit No. SU 10564 This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is
revealed for limited purposes only. This document is the property of Baker Hughes and is to be returned to Baker
May 30, 2007 Hughes on request and may not be reproduced, used or disclosed to persons not having a need to know consistent
with the purpose of the document, without the written consent of Baker Hughes. This document is not rented, loaned
Page 16 of 18 Rev. A or sold, either alone or in conjunction with equipment or product. © 5/30/07 Baker Hughes Incorporated.
Dimensional Data Drawing No. 945-249-00P02
Reaming Watermelon Mill THIS DOCUMENT IS FOR INTERNAL USE ONLY
This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is Unit No. SU 10564
revealed for limited purposes only. This document is the property of Baker Hughes and is to be returned to Baker
Hughes on request and may not be reproduced, used or disclosed to persons not having a need to know consistent May 30, 2007
with the purpose of the document, without the written consent of Baker Hughes. This document is not rented, loaned
or sold, either alone or in conjunction with equipment or product. © 5/30/07 Baker Hughes Incorporated. Rev. A Page 17 of 18
Page 18 of 18
May 30, 2007
Unit No. SU 10564 Reaming Watermelon Mill
Dimensional Data
Refer to Drawing No. 945-249-00P02.
Material No. A B C D E F G H J Box K Pin L
H151-09-7302 7.375 6.688
Rev. A
H151-09-7604 50.13 46.38 12.50 12.55 4.25 5.50 7.625 6.938 3.50" API REG 1.50
H151-09-7703 7.750 7.063
H151-09-7802 7.875 7.188
H151-09-8301 8.375 7.69
or sold, either alone or in conjunction with equipment or product. © 5/30/07 Baker Hughes Incorporated.
with the purpose of the document, without the written consent of Baker Hughes. This document is not rented, loaned
Hughes on request and may not be reproduced, used or disclosed to persons not having a need to know consistent
revealed for limited purposes only. This document is the property of Baker Hughes and is to be returned to Baker
This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is