1. Install AutoCAD Electrical 2019 and the Network License Manager, configure the license server to point to the license file and start the license server service.
2. Launch AutoCAD Electrical, select the local license server, then exit to copy the license file to generated license folders.
3. Run the crack executable and launch AutoCAD Electrical again selecting the local license server to activate the cracked license.
1. Install AutoCAD Electrical 2019 and the Network License Manager, configure the license server to point to the license file and start the license server service.
2. Launch AutoCAD Electrical, select the local license server, then exit to copy the license file to generated license folders.
3. Run the crack executable and launch AutoCAD Electrical again selecting the local license server to activate the cracked license.
1. Install AutoCAD Electrical 2019 and the Network License Manager, configure the license server to point to the license file and start the license server service.
2. Launch AutoCAD Electrical, select the local license server, then exit to copy the license file to generated license folders.
3. Run the crack executable and launch AutoCAD Electrical again selecting the local license server to activate the cracked license.
2. Go to folder named "CRACK". Install Network License Manager
("nlm11.14.1.3_ipv4_ipv6_win64.msi") and change "this_host" in ADESK.DAT to your host name. Setup & start license server (LMTOOLS Utility) and Select "Configuration using Services" Go to "Config Services" tab and Select "path to the lmgrd.exe file" to your lmgdr.exe (typically C:\Autodesk\Network License Manager\lmgdr.exe) , Path to License file (Choose to show *.dat files) and select "ADESK.DAT) Go to "Start/Stop/Reload" TAB and click "Start Server" (see https://knowledge.autodesk.com/sites/default/files/file_downloads/nlm11.14.1.3_ipv4 _ipv6_win64_readme.htm if you have problems)
3. Disconnect the Internet (if it is possible) and start Autodesk AutoCAD
Electrical 2019 and Choose Multi User Select License server model: Single License Server type "locahost" in Server name AutoCAD Electrical 2019 will generate folder that ends with _2019.0.0.F located in \ProgramData\Autodesk\CLM\LGS\ Exit Autodesk AutoCAD Electrical 2019
3. Copy/overwrite LICPATH.LIC to all subfolders by path
\ProgramData\Autodesk\CLM\LGS\ Like - \ProgramData\Autodesk\CLM\LGS\128K1_2019.0.0.F\licpath.lic - \ProgramData\Autodesk\CLM\LGS\919K1_2019.0.0.F\licpath.lic
4. Run electr2019crk.exe
5. Start Autodesk AutoCAD Electrical 2019 and Choose Multi User
Select License server model: Single License Server type "locahost" in Server name