Professional Documents
Culture Documents
Deshuttering Oil PDF
Deshuttering Oil PDF
Description
Dr. Fixit Deshuttering oil is a concentrated mould or shuttering release agent. It is suitable for use with all
types of moulds and formwork of concrete including wood, steel, etc. for easy release / stripping of hardened
concrete It is a water dilutable product, diluted just before application.
Method of Application
2 MIXING
}} Mix the content of the container thoroughly to an uniform mix.
}} Mix concentrated Dr. Fixit Deshuttering Oil with recommended quantity of clean potable water in a clean
container thoroughly.
3 APPLICATION
}} Apply one coat on the formwork with a brush, roller or by spraying. Allow the formwork to dry completely
}} Excess application of emulsion may cause “bugholes” or imperfections in the concrete finish.
Technical Information
Coverage
}} For untreated wooden surface - 75 – 100 m2 / 6 ltrs
}} For pre-oiled wooden surface – 90 – 150 m2 / 6 ltrs
}} For steel surface - 125 to 180 m2 / 6 ltrs
Packaging
}} 10 litres
Pidilite Industries Limited DISCLAIMER The product information & application details given by the
company & its agents has been provided in good faith & meant to serve
Construction Chemicals Division
only as a general guideline during usage. Users are advised to carry
Ramkrishna Mandir Road out tests & take trials to ensure on the suitability of products meeting
Post Box No. 17411 their requirement prior to full scale usage of our products. Since the
correct identification of the problems, quality of other materials used
Andheri (E) Mumbai 400059 INDIA
and the on-site workmanship are factors beyond our control, there are
Tel +91-22-2835 7000 • Fax +91-22-2835 7008 no expressed or implied guarantee / warranty as to the results obtained.
website www.doctor-fixit.com • E-mail drfixit@pidilite.com The company does not assume any liability or consequential damage for
Toll Free No.: 1800-22-5502 unsatisfactory results, arising from the use of our products.