Professional Documents
Culture Documents
Active Switch: Provisioning A New Member For A Switch Stack
Active Switch: Provisioning A New Member For A Switch Stack
1.By default, switches are numbered as 1. Renumber it to 3 if you are adding the 3rd switch
switch# switch 1 renum 3
WARNING: Changing the switch number may result in a configuration change for that switch.
The interface configuration associated with the old switch number will remain as a provisioned configuration.
Do you want to continue?[y/n] Y
switch# wr mem
switch# reload
1. Change priority to 13
switch# switch 3 priority 13
WARNING: Changing the switch number may result in a configuration change for that switch.
The interface configuration associated with the old switch number will remain as a provisioned configuration.
Do you want to continue?[y/n] Y
switch# wr mem
switch# reload
1. Turn Off the switch and connect stack cables now. DO NOT POWER IT ON NOw
SUMMARY STEPS
1. show switch
2. configure terminal
3. switch stack-member-number provision type
4. end
5. copy running-config startup-config