You are on page 1of 4

EBS GEN3 MEDIUM SOFTWARE

PACKAGE

• Hill start assist reduces wear on driveline components.


• Safer driving when starting uphill
• Better driving on slippery conditions

The the new generation of EBS system, introduced


0335 offers different levels of functionality. For all trucks equipped with
EBS-STD it is possible to change this software package to EBS-MED.
The EBS Medium software package offers benefits like automatic
differential lock, hill start assistance and throttle release torque control.
Throttle release torque control

Throttle release torque control can prevent


the driving wheels locking on slippery roads
when the accelerator is released. If the
wheels begin to lock, the auxiliary brake
will be shut off and the driving wheels obtain a
rotational speed which is equivalent to the
vehicle’s speed. The wheels will then regain
grip with the road. The function automatically
re-engages, if the vehicle’s speed >10 kph.
When the vehicle is disengaged or ABS is
active on the front axle, the function
automatically is disengaged.

Automatic differential lock


(4x2/6x2/8x2 )

Automatic differential lock (DLC, Diff Lock


Control) is only available on vehicles with
one drive axle. Differential lock
is activated automatically when the driving
wheels begin to rotate with different
speeds. Before the function is
engaged, the wheel speeds are
synchronised. Automatic
differential lock functions only at speeds
<15 kph and automatically disengages if
the speed exceeds 15 kph.
Hill start assist

Hill start assist helps the driver to start in


uphill sections.By activating the function,
the brakes are not immediately
released and the driver has extra time to
accelerate. The function is deactivated
when the switch is pressed in a
second time.Hill start assist functions in
different ways dependent on the gearbox:

Manual gearbox:
The brake pressure is maintained until
the clutch pedal is released or until a
specific engine torque is achieved.
Automatic gearbox:
The brake pressure is maintained
constant for a specific time period after
the brake pedal is released or until a
specific engine torque is achieved.
Version 2 0335
FH/FM
EBS-STD
Software kit
85107474

Switch
3987950

Symbol Lens
20508977
Switch
4x2/6x2/8x2 8157759
Symbol Lens
4x2/6x2/8x2
1594566
Installation Instruction 85107767

You might also like