Professional Documents
Culture Documents
h a n g e Pro
3512 Generator Set Engine 67Z00772-UP(SEBP2640 - 60) - Systems & Components Page 1 of 3 XChange Pro
F- d F- d
uc
uc
PD
PD
!
!
W
W
t
t
O
O
N
N
y
y
bu
bu
to
to
ww
ww
om
om
k
k
lic
lic
C
C
.c
.c
w
w
tr re tr re
.
.
ac ac
k e r- s o ft w a k e r- s o ft w a
Shutdown SIS
Previous Screen
Specifications
3500 Generator Set Engines
Media Number -SENR2361-12 Publication Date -01/01/2013 Date Updated -07/06/2017
i04905680
S/N - 23Z1-UP
S/N - 24Z1-UP
S/N - 25Z1-UP
S/N - 67Z1-UP
S/N - 70Z1-UP
S/N - 73Z1-UP
S/N - LN21-UP
S/N - LN31-UP
S/N - LY21-UP
S/N - SRN1-UP
S/N - SRR1-UP
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 12/24/2018
XC
h a n g e Pro
3512 Generator Set Engine 67Z00772-UP(SEBP2640 - 60) - Systems & Components Page 2 of 3 XChange Pro
F- d F- d
uc
uc
PD
PD
!
!
W
W
t
t
O
O
N
N
y
y
bu
bu
to
to
ww
ww
om
om
k
k
lic
lic
C
C
.c
.c
w
w
tr re tr re
.
.
ac ac
k e r- s o ft w a k e r- s o ft w a
Illustration 1 g03065796
Table 1
Specification for 195-1926 Valve Mechanism Gp and 379-4834 Valve Mechanism Gp
Item Qty Part Specification Description
1 1 3J-9196 Jam Nut Torque to 70 ± 15 N·m (52 ± 11 lb ft).
Diameter is 37.084 ± 0.013 mm (1.4600 ± 0.0005 inch).
7C-2377 Arm
2 1 Bore of the bearing is 37.140 ± 0.015 mm
Shaft Assembly
(1.4622 ± 0.0006 inch).
Use the following procedure in order to install the fuel injector:
1. Put multipurpose grease in the bore of the cylinder head in
order to lubricate the O-ring seals.
2.Put the fuel injector in the bore. Use the bolt and the clamp in
order to push the fuel injector into the correct position.
- - - Note: Do not tap or hit surface "Y" in order to install the
injector.
3.Tighten bolt (3) that holds the fuel injector clamp. Torque to
65 ± 7 N·m (48 ± 5 lb ft).
3.After the clamp has been tightened, the fuel injector rack "X"
must move freely.
A - - Fuel timing dimension:
Refer to TMI (Technical Marketing Information) for the correct
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 12/24/2018
XC
h a n g e Pro
3512 Generator Set Engine 67Z00772-UP(SEBP2640 - 60) - Systems & Components Page 3 of 3 XChange Pro
F- d F- d
uc
uc
PD
PD
!
!
W
W
t
t
O
O
N
N
y
y
bu
bu
to
to
ww
ww
om
om
k
k
lic
lic
C
C
.c
.c
w
w
tr tr
re
timing specifications for the adjustment of the fuel injection re
.
.
ac ac
k e r- s o ft w a k e r- s o ft w a
pump.
7N-4782 Lifter Guide springs must not be used again. Always install new guide
5 3
Guide Spring springs.
Diameter of new lifter assembly is 29.900 ± 0.010 mm
346-7515 Lifter (1.1772 ± 0.0004 inch).
6 3
As Bore in head for lifter assembly is 30.000 ± 0.025 mm
(1.1811 ± 0.0010 inch).
Copyright 1993 - 2018 Caterpillar Inc. Mon Dec 24 23:51:20 UTC+0200 2018
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 12/24/2018