Professional Documents
Culture Documents
HDPE FittingsSept2014 PDF
HDPE FittingsSept2014 PDF
TABLE OF CONTENTS
INFO SHEETS………………………………………………P 3-10
PIPE CHARTS………………………………………………P 11-12
FLANGE ADAPTERS…………………………………….P 13-17
STUB ENDS………………………………………………….P 18-20
FLANGES (HDPE BLINDS & CONVOLUTED)..P 21-24
MJ ADAPTERS IPS/DIPS………………………………P 25-27
WALL ANCHOR / WATER STOP……………………P 28-29
IPS/DIPS TRANSITION…………………………………P 30
CAPS…………………………………………………………….P31-32
REDUCERS…………………………………………………..P33-37
ELBOWS……………………………………………………….P38-60
TEES……………………………………………………………..P61-70
CROSSES……………………………………………………...P71-73
LATERALS…………………………………………………….P74-77
ELECTROFUSION COUPLINGS (EF)……………..P78-86
FM INFORMATION……………………………………….P87-89
FM PRICE SHEETS………………………………….……P90-110
INDUSTRIAL PLASTICS ISO CERTIFICATE….111-113
2
9/5/14
FITTING INFORMATION
Machined Fittings:
Machined fittings (i.e.: flange adapters, stub ends, MJ adapters, slip joint anchors,
branch saddles) are normally fully pressure rated to SDR ordered unless otherwise specified.
Machined fittings are normally stocked in most SDR's listed and can be re-machined to a
lesser wall thickness if needed.
Some fittings may require additional machining charges, please inquire for pricing infor-
mation if re-machining is necessary.
Fabricated Fittings:
Fabricated mitered fittings (ie: elbows, line tees, and line crosses with the exception of Wyes
which are @63%) are generally rated at 80% of the pressure rating of the SDR of material that
is used for the fitting (ie: a mitered fitting produced using SDR-11 160 psi material would be
pressure rated for a working pressure of 128 psi).
Fully pressure rated mitered fabricated fittings will be constructed using the next size
heavier SDR material available (ie: fittings rated for a SDR-11 160 psi working pressure rating
would be manufactured using SDR-9 material).
Other fabricated fittings such as branch saddle tees, branch saddle wyes, and waterstops are
normally pressure rated to the SDR ordered.
Molded Fittings:
Molded fittings are stocked in most SDR's listed and are normally fully pressure rated.
3
9/5/14
Customer:
Project Name:
Service: (Size, service, working pressure, etc)
Industrial Plastics fittings are manufactured from pressure rated high density polyethylene pipe grade feedstock
resin made to ASTM F714.
The resin properties are determined by the resin and pipe manufacturers, and can be any one of the
following resins as specified by the customer. Items marked “X” are the subject of this submittal.
ASTM D3350- Standard Specification for Polyethylene Plastic Pipe & Fittings Material
Cell Classification 234373E (Yellow, Medium Density PE 2406/2407) Bi-modal
Cell Classification 234373E (Yellow, Medium Density PE 2406/2407) Uni-modal
Cell Classification 345464C (Black, High Density PE 3408/3608)
Cell Classification 445576C (Black PE 4710 Bi-modal)
Cell Classification 445574C (Black PE 4710 Uni-modal)
The dimensional characteristics and pressure capabilities of Industrial Plastics molded and fabricated
fittings are established in accordance with the following standards, and as specified by the customer. Additional
dimensional data may accompany this submittal. Items marked “X” are the subject of this submittal.
ASTM D2513-09 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing And Fittings
ASTM F2206-02 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe,
Fittings, Sheet Stock, Plate Stock, or Block Stock.
ASTM D3261-03 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for
Polyethylene (PE) Plastic Pipe and Tubing
ASTM D2683-04 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-
Controlled Polyethylene Pipe and Tubing
AWWA C906-07 DIPS Polyethylene (PE) Pressure Pipe and Fittings, 2in through 63in For Water Distribution –
Fittings specified to be AWWA approved meet this specification. Customer waives AWWA hydro-testing
requirement over 24” unless specifically noted on purchase order.
AWWA C906-07 IPS Polyethylene (PE) Pressure Pipe and Fittings, 2in through 63in For Water Distribution –
Fittings specified to be AWWA approved meet this specification. Customer waives AWWA hydro-testing
requirement over 24” unless specifically noted on purchase order.
NSF-61 Drinking Water System Components – Health Effects
Factory Mutual Class 200 Factory Mutual, Class number 1613, Polyethylene (PE) Pipe and Fittings for
Underground Fire Protection
Factory Mutual Class 150 Factory Mutual, Class number 1613, Polyethylene (PE) Pipe and Fittings for
Underground Fire Protection
Other
All fabrication procedures will be carried out according to the IP QA/QC manual including routine in-plant inspections,
quality control, sampling, and long term testing which meets or exceeds the customer specifications or standards
listed above. The IP QA/QC manual is available for customer inspection upon request.
4
9/5/14
Pricing:
All pricing will be issued FOB. Industrial Plastics Division Location unless noted otherwise,. Freight
pricing estimates can be provided upon request.
All prices are based on normal manufacturing lead times at normal costs. Rush manufacturing and
rush shipments may be subject to a service or expediting charge.
All pricing and designs are subject to change without notice.
All orders are subject to Industrial Plastics Division, acceptance and our current conditions of sale..
Ordering:
Freight Charges: Freight will be prepaid and added to the invoice unless otherwise specified.
Order Placement: Orders are taken by our Customer Service Department via phone, facsimile and/or
e-mail and will require a purchase order number.
Availability of Product:
Industrial Plastics Division, has a large inventory of HDPE pipe, fittings and accessories.,
Availability of the products listed in this catalog will always be subject to the availability of raw material.
Large quantities of raw material are kept on hand to provide timely deliveries.
5
9/5/14
RETURN POLICY
6
9/5/14
LIMITED WARRANTY
1. WARRANTY: Subject to the limitations expressed herein, Seller warrants that products manufactured by Seller shall be
free from defects in design, material and workmanship for a period of one (1) year from installation but in no case shall
the warranty period extend longer than eighteen (18) months from the date of sale ("Warranty Period"). This warranty is
void for any damage caused by (a) improper storage or installation (b) accident, damage, abuse or misuse, (c) abnormal
or unusual operating conditions or applications (d) operating conditions or applications not made known to Seller prior to
the date of the sale of the products (e) operating conditions or applications above the rated capacity of the product (f) a
purpose or application in any way different from that for which the product was designed or (g) failure to comply with the
terms of this warranty agreement.
2. REMEDIES. Seller shall repair or replace, at its option and at no additional charge, any non-conforming or otherwise
defective product, upon receipt of notice from Buyer during the Warranty Period of the alleged material defect. Seller
makes NO ADDITIONAL ALLOWANCE FOR THE LABOR OR EXPENSE OF REPAIRING OR REPLACING DEFECTIVE
PRODUCTS OR WORKMANSHIP OR DAMAGE RESULTING FROM SAME. SELLER HEREBY DISCLAIMS ALL OTHER
EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, ALL IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS OR FITNESS FOR A PARTICULAR PURPOSE.
3. BUYER RESPONSIBILITIES. Every claim under this warranty shall be deemed waived unless Buyer submits to Seller a
detailed description of the alleged defect and the manner in which Seller's workmanship is believed to be materially
defective. Such description must be submitted in writing within sixty (60) days of the date Buyer knew or reasonably
should have known of the alleged material defect and within the Warranty Period.
4. LIMITATION OF LIABILITY. The warranty provided above is strictly limited to its terms and is in lieu of all other
warranties expressed, implied and statutory. Buyer specifically understands and agrees that Seller shall not be liable in
tort to Buyer, whether based on negligence, strict liability, or any other theory of tort liability for any action or failure to
act in respect to the manufacture, preparation for sale, sale, delivery or use of Seller's products. Buyer expressly agrees
that his sole and exclusive remedy for breach of the warranty set forth above shall be the remedies set forth above.
BUYER FURTHER SPECIFICALLY UNDERSTANDS AND AGREES THAT, EXCEPT AS PROVIDED NO REMEDY SHALL BE
AVAILABLE TO BUYER, INCLUDING, BUT NOT LIMITED TO, CLAIMS FOR INCIDENTAL, PUNITIVE, SPECIAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND. UNDER NO CIRCUMSTANCES WILL SELLER BE LIABILE FOR LOSS OF
ANTICIPATED PROFITS OR ANY OTHER LOSS CAUSED BY REASON OF NONOPERATION OR INCREASED EXPENSE OF
OPERATION CAUSED BY SELLER'S PRODUCTS. BUYER HEREBY ACKNOWLEDGES AND AGREES THAT UNDER NO
CIRCUMSTANCES, AND IN NO EVENT, SHALL SELLER'S LIABILITY, IF ANY, EXCEED THE NET SALES PRICE OF THE
DEFECTIVE PRODUCT(S) PURCHASED DURING THE PREVIOUS CONTRACT YEAR.
5. RECOMMENDATIONS BY SELLER. Seller may assist Buyer in selection decisions by providing information regarding
products that it manufacturers and those manufactured by others. However, Buyer acknowledges that Buyer ultimately
chooses the product's suitability for its particular use, as normally signified by the signature of Buyer's technical
representative. Any recommendation made by Seller concerning the use, design, application or operation of the products
shall not be construed as representations or warranties, expressed or implied. Failure by Seller to make
recommendations or give advice to Buyer shall not impose any liability upon Seller.
6. EXCUSED PERFORMANCE. Seller will make a good faith effort to complete delivery of the products as indicated by
Seller in writing, but Seller assumes no responsibility or liability and will accept no backcharge or loss or damage due to
delay or inability to deliver, caused by acts of God, war, labor difficulties, accidents, inability to obtain materials, delays of
carriers, contractors or suppliers or any other causes of any kind whatever beyond the control of Seller. Under no
circumstances shall Seller be liable for any special, consequential, incidental, or direct damages, losses, or expenses
(whether or not based on negligence) arising directly or indirectly from delays or failure to give notice of delay.
7. CONTROLLING PROVISIONS. All terms and conditions contained in any prior oral or written communication,
including, without limitation, Buyer's purchase order, which are different from or in addition to the terms and conditions
herein are hereby rejected and shall not be binding on Seller, whether or not they would materially alter this document,
and Seller herby objects thereto. Buyer agrees that all sales are subject to Seller's Terms and Conditions (Terms) which
are available upon request or can be viewed on the web at www.ferguson.com/sales-terms.html. Buyer will be deemed
to have assented to Terms if any part of the goods and/or services are delivered.
Rev:3/30/2007 5:40 PM D:\Price Book\price book from desk top\Price Sheet dated 01 08 2013\3F Industrial Plastics Division Warranty v03.doc
7
9/5/14
8
9/5/14
TRAINERS
Name Position Phone Cell Phone Fax
Director of Training/
Breckenridge, Bill Western Region Trainer (520)-954-7863 (520) 807-9718
Stratton, Allen Eastern Region Trainer (317)-654-4452 (317)-925-0755
OPERATIONS
Name Position Phone Cell Phone Fax
Thorp, Marie Operations Manager (360)835-4002 (360)-518-1967 (360)-835-3521
Raulerson, Roger Operations Support (863)-614-9322 (863)-581-9298 (863)-666-5310
9
WOLSELEY INDUSTIAL PLASTICS
Branch Locations
REGIONAL MAP TBD
AK Clayton Yawn
Lawrence Norris
Jack Cole
Mike Nichols
Gary Burback
WA
Joe Paul
W ashougal Tim Brizzolara
ME
MT
ND
OR MN VT
NH
ID
SD WS NY
Horseheads
WY MI
Ogden IA PA
NV NE
CA OH
10
IN
UT IL Indianapolis
CO WV
MO VA
KS
KY
NC
TN
AZ OK
NM AK SC
GA
Tucson MS AL
TX
LA
HI
Houston FL
Lakeland
9/5/14
9/5/14
Pressure Ratings are calculated using 0.63 design factor for HDS at 73°F as listed in PPI TR-4 for PE 4710 materials. HDPE can accomodate up to 1.5 times the pipe pressure rating for
a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge. Temperature, Chemical, and Environmental use considerations may require use of additional
design factors.
This size and dimension chart is intended for reference purposes. It should not be used in place of the advice from a licensed Professional Engineer. Pipe weights are calculated in
accordance with PPI TR-7. Average inside diameter is calculated using IPS OD and Minimum wall plus 6% for use in estimating fluid flows. Actual ID will vary. When designing
components to fit the pipe ID, refer to pipe dimension and tolerances in the applicable pipe manufacturing specification.
AUGUST 2014
11
9/5/14
DIPS Size and Dimension Data PE4710 (PE3408)
Pressure Ratings are calculated using 0.63 design factor for HDS at 73°F as listed in PPI TR-4 for PE 4710 materials. HDPE can accomodate up to 1.5 times the pipe pressure rating
for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge. Temperature, Chemical, and Environmental use considerations may require use of additional
design factors.
AUGUST 2014
12
9/5/14
Dimensions and weights are approximate and subject to change Rev 18-Aug-2014
13
9/5/14
IPS
100 DR 17 CALL 87 CFP PEI17ABF26
26"
26.00" 160 DR 11 CALL 117 CFP PEI11ABF26
IPS DR
50-100 CALL 90 CFP PEIPS17BFA28
32.5-17
28"
28.00" 160 DR 11 CALL 129 CFP PEI11ABF28
Dimensions and weights are approximate and subject to change Rev 18-Aug-2014
14
9/5/14
IPS DR
50-100 CALL 98 CFP PEI17HBF30
32.5-17
30"
30.00" 160 DR 11 CALL 134 CFP PEI11ABF30
IPS
DR PEI26HBF42
42
42" 50-100
32.5-21
CALL 152 CFP
PEI32HBF42
42.00"
Dimensions and weights are approximate and subject to change Rev 18-Aug-2014
15
9/5/14
Butterfly valve flange adapters should always be tested to fit to the actual valve and then field tested for valve disk clearance and full rotation
prior to butt fusion of the flange to the pipeline. After butt fusion and bolt up of flange repeat this trial at each occurrence to insure final install
is properly centered, thus again allowing valve disk clearance and full rotation.
The above requirement insures proper valve operation prior to burial and also will identify unexpected
situations including valve design changes or valve substitutions at the project.
2.50 38
100 PEI17HBSE24F
24" 160 27 11/16 x 5 PEI11HBSE24F
24.000" 200 PEI9HBSE24F
3.80 45
267
PEI7HBSE24F
1.91 28
26" 100 PEI17HBSE26F
30.00 X 4.00
26.000" 128
2.95 36
160 PEI11HBSE26F
65 PEI26HBSE32F
32" 80 36.50 X 4.00 2.35 51 PEI21HBSE32F
32.000"
100 PEI17HBSE32F
65 PEI26HBSE34F
34" 38.50 X 4.00 2.5 59 PEI21HBSE34F
80
34.000"
100 PEI17HBSE34F
50 PEI32HBSE36F
36" 65 PEI26HBSE36F
40.80 X 4.00 2.65 67
36.000" 100
PEI17HBSE36F
42" 65 PEI26HBSE42F
47.50 X 4.50 3.09 82
42.000" 100
PEI17HBSE42F
50 PEI32HBSE48F
48" 54.00 X 4.50 2.60 87
48.000" 65
PEI26HBSE48F
50 PEI32HBSE54F
54" 60.00 X 4.50 2.60 152
54.000" 65
PEI26HBSE54F
20
9/5/14
36" Non
42 3/4 x 1 1/2 110 1.5 32
36.000" Pressure PEIHBBF36F
42" Non
49 1/2 x 2 147 1.5 36
42.000" Pressure PEIHBBF42F
48" Non
56 x 2 244 1.5 44
48.000" Pressure PEIHBBF48F
54" Non
62 3/4 x 2 303 1.75 44
54.000" Pressure PEIHBBF54F
23
9/5/14
24
9/5/14
4"
160 DR 11 10.25 4.50 4 1/2 4 PEI11HMJSSP
4.5000"
6"
160 DR 11 11.31 6.62 5 4 PEI11HMJSSU
6.625"
8"
160 DR 11 11.94 8.62 5 6 PEI11HMJSSX
8.625"
10"
160 DR 11 13.56 10.75 6 8 PEI11HMJSS10
10.750"
12"
160 DR 11 13.00 12.75 6 8 PEI11HMJSS12
12.750"
4"
160 DR 11 10.25 4.80 4 1/2 4 PED11HMJP
4.800"
200 DR 9
6"
160 DR 11 11.31 6.90 5 4 PED11HMJU
6.900"
200 DR 9
8"
160 DR 11 14.00 9.05 5 6 PED11HMJX
9.050"
200 DR 9
10"
160 DR 11 13.56 11.10 6 8 PED11HMJ10
11.100"
200 DR 9
12"
160 DR 11 13.00 13.20 6 8 PED11HMJ12
13.200"
200 DR 9
14"
160 DR 11 13.00 15.30 7 10 PED11HMJ14
15.30"
200 DR 9
16"
160 DR 11 13.00 17.40 7 12 PED11HMJ16
17.400"
200 DR 9
18" W/STIFFNER
13.00 19.50 7 12
19.500" 160 DR 11 PED11HMJ18
200 DR 9 CFP
W/STIFFNER
20"
160 DR 11 16.00 21.60 7 14 PED11HMJ20
21.600"
200 DR 9 CFP
W/STIFFNER
24"
160 DR 11 18.00 25.80 7 14 PED11HMJ24
25.800"
200 DR 9 CFP
27
9/5/14
160 PEI11HBWAWSKF
2" 200 1 5 1/2 x 5/8 x 3 1/2 1 PEI9HBWAWSKF
160 PEI11HBWAWSMF
3" 200 1 5 1/2 x 5/16 x 4 1/2 2 PEI9HBWAWSMF
160 PEI11HBWAWSPF
4" 200 1 5 1/2 x 1 1/4 x 6 1/4 4 PEI9HBWAWSPF
160 8 PEI11HBWAWSUF
6" 200 1 7 x 1 15/16 x 8 3/8 12 PEI9HBWAWSUF
160 12 PEI11HBWAWSXF
8" 200 1 7 x 2 1/2 x 10 1/2 22 PEI9HBWAWSXF
160 20 PEI11HBWAWS10F
10" 200 1 7 x 2 1/2 x 12 3/4 34 PEI9HBWAWS10F
160 36 PEI11HBWAWS12F
12" 200 1 7 x 2 1/2 x 15 1/4 52 PEI9HBWAWS12F
160 56 PEI11HBWAWS14F
14" 200 1 10 x 2 1/2 x 17 1/4 80 PEI9HBWAWS14F
160 74 PEI11HBWAWS16F
16" 200 1 10 x 3 3/8 x 19 3/4 106 PEI9HBWAWS16F
160 1 88 PEI11HBWAWS18F
18" 200 2 10 x 3 3/8 x 20 1/2 110 PEI9HBWAWS18F
160 1 112 PEI11HBWAWS20F
20" 200 2 10 x 3 3/8 x 23 3/8 140 PEI9HBWAWS20F
160 1 136 PEI11HBWAWS22F
22" 200 2 10 x 3 3/8 x 25 1/2 170 PEI9HBWAWS22F
160 1 168 PEI11HBWAWS24F
24" 200 2 10 x 3 3/8 x 27 3/4 204 PEI9HBWAWS24F
160 PEI11HBWAWS26F
26" 200 2 11 1/2 x 3 1/2 x 30 242 PEI9HBWAWS26F
160 PEI11HBWAWS28F
28" 200 2 11 1/2 x 3 1/2 x 32 1/4 304 PEI9HBWAWS28F
160 PEI11HBWAWS30F
30" 200 2 11 1/2 x 3 1/2 x 34 1/4 368 PEI9HBWAWS30F
100 PEI17HBWAWS32F
32" 160 2 11 1/2 x 3 1/2 x 36 1/2 377 PEI11HBWAWS32F
100 PEI17HBWAWS34F
34" 160 2 11 1/2 x 4 x 38 1/2 442 PEI11HBWAWS34F
100 PEI17HBWAWS36F
36" 160 2 11 1/2 x 4 x 40 3/4 523 PEI11HBWAWS36F
80 PEI21HBWAWS42F
42" 100 2 18 x 4 x 47 1/2 505 PEI17HBWAWS42F
80 PEI21HBWAWS48F
48" 100 2 18 x 4 x 53 7/8 672 PEI17HBWAWS48F
80 PEI21HBWAWS54F
54" 100 2 18 x 4 x 60 955 PEI17HBWAWS54F
4" 1
160 7 x 1 1/4 x 6 1/4 4 PED11HBWAWSPF
4.80" 200 2 PED9HBWAWSPF
6" 1 8
160 7 x 1 15/16 x 8 3/8 PED11HBWAWSUF
6.90" 200 2 12 PED9HBWAWSUF
8" 1 12
160 7 x 2 1/2 x 10 7/8 PED11HBWAWSXF
9.05" 200 2 22 PED9HBWAWSXF
10" 1 20
160 7 x 2 1/2 x 13 3 /16 PED11HBWAWS10F
11.10" 200 2 32 PED9HBWAWS10F
12" 1 36
160 7 x 2 1/2 x 15 5/16 PED11HBWAWS12F
13.20" 200 2 52 PED9HBWAWS12F
14" 1 54
160 10 x 2 1/2 x 17 3/8 PED11HBWAWS14F
15.30" 200 2 68 PED9HBWAWS14F
16" 1 72
10 x 23 3/8 x 19 1/2
17.40" 160 PED11HBWAWS16F
200 2 90 PED9HBWAWS16F
18" 1 88
160 10 x 3 3/8 x 21 5/8 PED11HBWAWS18F
19.50" 200 2 110 PED9HBWAWS18F
20" 1 106
160 10 x 3 3/8 25 13/16 PED11HBWAWS20F
21.60" 200 2 132 PED9HBWAWS20F
24" 1 160
160 10 x 3 3/8 x 31 PED11HBWAWS24F
25.80" 200 2 200 PED9HBWAWS24F
160 3 PEIPED11HBTPF
4" x 4" 10
4.8" x 4.5" 200 4 PEIPED9HBTPF
160 6 PEIPED11HBTUF
6" x 6" 11 3/4
6.9" x 6.6" 200 7 PEIPED9HBTUF
160 10 PEIPED11HBTXF
8" x 8" 13
9.1" x 8.6" 200 12 PEIPED9HBTXF
160 14 PEIPED11HBT10F
10" x10" 13
11.1" x 10.8" 200 17 PEIPED9HBT10F
160 20 PEIPED11HBT12F
12" x 12" 15
13.2" x 12.8" 200 24 PEIPED9HBT12F
160 35 PEIPED11HBT14F
14" x 14" 15
15.3" x 14.0" 200 41 PEIPED9HBT14F
160 45 PEIPED11HBT16F
16" x 16" 15
17.4" x 16.0" 200 53 PEIPED9HBT16F
160 56 PEIPED11HBT18F
18" x 18" 15
19.5" x 18.0" 200 67 PEIPED9HBT18F
160 69 PEIPED11HBT20F
20" x 20" 15
21.6" x 20.0" 200 82 PEIPED9HBT20F
160 98 PEIPED11HBT24F
24" x 24" 15
25.8" x 24.0' 200 117 PEIPED9HBT24F
30
9/5/14
10” 200 DR 9 N 12
10 ”
10.75” PEI9HBCA10F
12” 200 DR 9 N 16
12.75 PEI9HBCA12F
14” 200 DR 9 N 23
14.00” PEI9HBCA14F
160 DR 11 N PEI11HBCA16F
16” 28
16.00” 200 DR 9 N PEI9HBCA16F
100 DR 17 N PEI17HBCA22F
22” 55
22.00” 160 DR 11 N PEI11HBCA22F
100 DR 17 N PEI17HBCA24F
24” 64
24.00” 160 DR 11 N PEI11HBCA24F
32
9/5/14
List
Nominal Size Pressure Dimension Weight per
Price Part #
Actual OD Class (psi) L (in) Item (lbs)
6" x 4"
160 6 7 PED11HBRUPF
6.900" x 4.800'
8" x 6"
160 10 11 PED11HBRXUF
9.050" x 6.900"
10" x 8"
160 12 16 PED11HBR10XF
11." x 9.050"
12"x 10"
160 12 23 PED11HBR1210F
13.200" x 11.10"
14''x 12" 14
15.30" x 13.20" 160 33 PED11HBR1412F
16''x 14"
14
17.40" x 15.30" 160 33 PED11HBR1614F
18" x 16" 14
19.50" x 17.40" 160 53 PED11HBR1816F
20" x 18" 25
21.00" x 19.50" 160 74 PED11HBR2018F
24" x 20"
25
25.88" x 21.60" 160 125 PED11HBR2420F
80 DR 17 1 PEI17HB225KF2
2" 128 DR 11 1 PEI11HB225KF2
13 1/8 x 4 x 4 1/4
2.3750" 160 DR 9 1 PEI9HB225KF2
200 DR 7 1 PEI7HB225KF2
80 DR 17 1 PEI17HB225MF2
3" 128 DR 11 1 PEI11HB225MF2
13 5/8 x 4 x 4 3/8
3.50" 160 DR 9 1 PEI9HB225MF2
200 DR 7 2 PEI7HB225MF2
80 DR 17 2 PEI17HB225PF2
4" 128 DR 11 2 PEI11HB225PF2
14 1/4 x 5 x 5 1/2
4.5000" 160 DR 9 3 PEI9HB225PF2
200 DR 7 3 PEI7HB225PF2
80 DR 17 6 PEI17HB225UF2
6" 128 DR 11 6 PEI11HB225UF2
15 1/4 x 6 x 16 5/8
6.625" 160 DR 9 7 PEI9HB225UF2
200 DR 7 8 PEI7HB225UF2
80 DR 17 16 1/4 x 6 1/2 x 7 10 PEI17HB225XF2
8" 128 DR 11 10 PEI11HB225XF2
8.625" 160 DR 9 12 PEI9HB225XF2
200 DR 7 3/8 15 PEI7HB225XF2
80 DR 17 17 1/4 x 6 1/2 x 7 11 PEI17HB22510F2
10" 128 DR 11 17 PEI11HB22510F2
10.750" 160 DR 9 20 PEI9HB22510F2
200 DR 7 5/8 24 PEI7HB22510F2
80 DR 17 19 PEI17HB22512F2
12" 128 DR 11 28 PEI11HB22512F2
19 1/2 x 8 x 9 1/4
12.750" 160 DR 9 34 PEI9HB22512F2
200 DR 7 42 PEI7HB22512F2
80 DR 17 23 PEI17HB22514F2
14" 128 DR 11 21 x 8 x 9 3/8 35 PEI11HB22514F2
14.000" 160 DR 9 41 PEI9HB22514F2
200 DR 7 51 PEI7HB22514F2
80 DR 17 31 PEI17HB22516F2
16" 128 DR 11 46 PEI11HB22516F2
24 x 8 x 9 5/8
16.000" 160 DR 9 55 PEI9HB22516F2
200 DR 7 66 PEI7HB22516F2
80 DR 17 41 PEI17HB22518F2
18" 128 DR 11 60 PEI11HB22518F2
27 x 8 x 9 3/4
18.000" 160 DR 9 71 PEI9HB22518F2
200 DR 7 85 PEI7HB22518F2
80 DR 17 51 PEI17HB22520F2
20" 128 DR 11 75 PEI11HB22520F2
160 DR 9 30 x 8 x 10 90 PEI9HB22520F2
20.000"
200 DR 7 108 PEI7HB22520F2
80 DR 17 63 PEI17HB22522F2
22" 128 DR 11 93 PEI11HB22522F2
33 x 8 x 10 1/4
22.000" 160 DR 9 111 PEI9HB22522F2
200 DR 7 133 PEI7HB22522F2
80 DR 17 76 PEI17HB22524F2
24" 128 DR 11 113 PEI11HB22524F2
36 x 8 x 10 3/8
24.000" 160 DR 9 135 PEI9HB22524F2
200 DR 7 161 PEI7HB22524F2
80 DR 17 142 PEI17HB22526F2
26"
128 DR 11 39 x 14 x 16 5/8 220 PEI11HB22526F2
26.000"
160 DR 9 253 PEI9HB22526F2
80 DR 17 167 PEI17HB22528F2
28"
128 DR 11 42 x 14 x 16 3/4 249 PEI11HB22528F2
28.000"
160 DR 9 297 PEI9HB22528F2
80 DR 17 45 x 14 x 17 194 PEI17HB22530F2
30"
128 DR 11 289 PEI11HB22530F2
30.000"
160 DR9 345 PEI9HB22530F2
32" 80 DR 17 223 PEI17HB22532F2
48 Xx14 x 17 1/8
32.000" 128 DR 11 333 PEI11HB22532F2
34" 80 DR 17 255 PEI17HB22534F2
51 x 14 x 17 3/8
34.000" 128 DR 11 380 PEI11HB22534F2
36" 80 DR 17 286 PEI17HB22536F2
54 x 14 x 17 5/8
36.000" 128 DR 11 426 PEI11HB22536F2
42" 65 DR 21 462 PEI21HB22542F2
63 x 21 x 25 1/8
42.000" 80 DR 17 563 PEI17HB22542F2
48" 65 DR 21 617 PEI21HB22548F2
72 x 21 x 25 3/4
48.000" 80 DR 17 753 PEI17HB22548F2
54" 50 DR 26 652 PEI26HB22554F2
81 x 21 x 26 3/8
54.000" 65 DR 21 799 PEI21HB22554F2
128 DR 11 1 PEI11HB3KF2
2" 160 DR 9 6 7/8 x 4 x 4 3/8 1 PEI9HB3KF2
2.375" 200 DR 7 1 PEI7HB3KF2
128 DR 11 1 PEI11HB3MF2
3" 160 DR 9 7 3/8 x 4 x 4 1/2 2 PEI9HB3MF2
3.500" 200 DR 7 2 PEI7HB3MF2
128 DR 11 2 PEI11HB3PF2
4" 160 DR 9 7 7/8 x 5 x 5 5/8 3 PEI9HB3PF2
4.500" 200 DR 7 3 PEI7HB3PF2
128 DR 11 6 PEI11HB3UF2
6" 160 DR 9 12 5/8 x 6 x 6 7/8 7 PEI9HB3UF2
6.625" 200 DR 7 8 PEI7HB3UF2
128 DR 11 11 PEI11HB3XF2
8" 160 DR 9 13 5/8 x 6 1/2 x 7 5/8 13 PEI9HB3XF2
8.625" 200 DR 7 15 PEI7HB3XF2
80 DR 17 12 PEI17HB310F2
10" 128 DR 11 18 PEI11HB310F2
16 1/2 X 6 1/2 X 8
10.750" 160 DR 9 22 PEI9HB310F2
200 DR 7 26 PEI7HB310F2
80 DR 17 21 PEI17HB312F2
12" 128 DR 11 32 PEI11HB312F2
19 1/8 X 8 X 9 3/4
12.750" 160 DR 9 38 PEI9HB312F2
200 DR 7 45 PEI7HB312F2
80 DR 17 27 PEI17HB314F2
14" 128 DR 11 40 PEI11HB314F2
21 X8 X 9 7/8
14.000" 160 DR 9 48 PEI9HB314F2
200 DR 7 58 PEI7HB314F2
80 DR 17 37 PEI17HB316F2
16" 128 DR 11 55 PEI11HB316F2
24 X 8 X 10 1/8
16.000" 160 DR 9 66 PEI9HB316F2
200 DR 7 79 PEI7HB316F2
80 DR 17 47 PEI17HB318F2
18" 128 DR 11 70 PEI11HB318F2
27 X 8 X 10 1/2
18.000" 160 DR 9 83 PEI9HB318F2
200 DR 7 100 PEI7HB318F2
80 DR 17 60 PEI17HB320F2
20" 128 DR 11 90 PEI11HB320F2
30 X 8 X 10 3/4
20.000" 160 DR 9 108 PEI9HB320F2
200 DR 7 129 PEI7HB320F2
80 DR 17 76 PEI17HB322F2
22" 128 DR 11 114 PEI11HB322F2
33 X 8 X 11
22.000" 160 DR 9 136 PEI9HB322F2
128 DR 7 162 PEI7HB322F2
80 DR 17 94 PEI17HB324F2
24" 128 DR 11 141 PEI11HB324F2
36 X 8 X 11 1/4
24.000" 160 DR 9 168 PEI9HB324F2
200 DR 7 201 PEI7HB324F2
80 DR 17 198 PEI17HB328F2
28" 128 DR 11 42 X 14 X 17 3/4 295 PEI11HB328F2
28.000" 160 DR 9 353 PEI9HB328F2
80 DR 17 45 X 14 X 18 228 PEI17HB330F2
128 DR 11 339 PEI11HB330F2
30" 160 DR 9 405 PEI9HB330F2
32" 80 DR 17 266 PEI17HB332F2
48 X 14 X 18 1/4
32.000" 128 DR 11 396 PEI11HB332F2
34" 80 DR 17 307 PEI17HB334F2
51 X 14 X 18 1/2
34.000" 128 DR 11 458 PEI11HB334F2
36" 80 DR 17 353 PEI17HB336F2
54 X 14 X 18 7/8
128 DR 11 525 PEI11HB336F2
36 000"
42" 65 DR 21 513 PEI21HB342F2
63 X 21 X 26 5/8
42.000" 80 DR 17 659 PEI17HB342F2
48" 65 DR 21 742 PEI21HB348F2
72 X 21 X 27 1/2
48.000" 80 DR 17 900 PEI17HB348F2
54" 50 DR 26 81 X 21 X 28 1/2 775 PEI26HB354F2
54.000" 65 DR 21 969 PEI21HB354F2
80 DR 17 12 PEI17HB410F2
10" 128 DR 11
12 5/8 x 6 1/2 x 8 3/4
18 PEI11HB410F2
10.750" 160 DR 9 22 PEI9HB410F2
200 DR 7 26 PEI7HB410F2
12" 80 DR 17 21 PEI17HB412F2
12.750" 128 DR 11 32 PEI11HB412F2
13 5/8 x 8 x 10 5/8
160 DR 9 38 PEI9HB412F2
200 DR 7 45 PEI7HB412F2
14" 80 DR 17 27 PEI17HB414F2
128 DR 11 40 PEI11HB414F2
14.000" 14 1/4 x 8 x 10 7/8
160 DR 9 48 PEI9HB414F2
200 DR 7 58 PEI7HB414F2
80 DR 17 37 PEI17HB416F2
16" 128 DR 11
15 1/4 x 8 x 11 5 /16
55 PEI11HB416F2
16.000" 160 DR 9 66 PEI9HB416F2
200 DR 7 79 PEI7HB416F2
80 DR 17 47 PEI17HB418F2
18" 128 DR 11
16 1/4 x 8 x 11 3/4
70 PEI11HB418F2
18.000" 160 DR 9 83 PEI9HB418F2
200 DR 7 100 PEI7HB418F2
80 DR 17 60 PEI17HB420F2
20" 128 DR 11
17 1/4 x 8 x 12 1/8
90 PEI11HB420F2
20.000" 160 DR 9 108 PEI9HB420F2
200 DR 7 129 PEI7HB420F2
80 DR 17 76 PEI17HB422F2
22" 128 DR 11
23 1/16 x 8 x 12 9/16
114 PEI11HB422F2
22.000" 160 DR 9 136 PEI9HB422F2
200 DR 7 162 PEI7HB422F2
80 DR 17 94 PEI17HB424F2
24" 128 DR 11
24 1/16 x 8 x 13
141 PEI11HB424F2
24.000" 160 DR 9 168 PEI9HB424F2
200 DR 7 201 PEI7HB424F2
80 DR 17 38 3/16 x 14 x 19 198 PEI17HB428F2
28" 128 DR 11 295 PEI11HB428F2
28.000" 160 DR 9 13/16 353 PEI9HB428F2
30" 80 DR 17 38 5/16 x 14 x 20 228 PEI17HB430F2
128 DR 11 339 PEI11HB430F2
30 000"
30.000
160 DR 9 405 PEI9HB430F2
3/16
80 DR 17 266 PEI17HB432F2
32" 38 3/8 x 14 x 20 5/8
32.000" 128 DR 11 396
PEI11HB432F2
80 DR 17 38 7/16 x 14 x 21 307 PEI17HB434F2
34"
34.000" 128 DR 11 1/16 458 PEI11HB434F2
80 DR 17 353 PEI17HB436F2
36" 38 1/2 x 14 x 21 7/16
36.000" 128 DR 11 525 PEI11HB436F2
65 DR 21 50 5/16 x 21 x 29 513 PEI21HB442F2
42"
42.000" 80 DR 17
11/16 659 PEI17HB442F2
65 DR 21 742 PEI21HB448F2
48" 50 9/16 x 21 x 30
48.000" 80 DR 17 15/16 905 PEI17HB448F2
50 DR 26 775 PEI26HB454F2
54"
54.000" 65 DR 21 50 3/4 x 21 x 32 3/16 969 PEI21HB454F2
Part #
Nominal Size Pressure Feed Dimension Weight per
List Price
Actual OD Class (psi) Stock R x C x B (in) Item (lbs)
Un-Machined
128 DR 11 1 PEI11HB4KF3
2" 160 DR 9 13 1/8 x 4 x 7 1 PEI9HB4KF3
2.375" 200 DR 7 1 PEI7H4BKF3
128 DR 11 2 PEI11HB4MF3
3" 160 DR 9 13 5/8 x 4 x 7 1/4 2 PEI9HB4MF3
3.500" 200 DR 7 3 PEI7HB4MF3
128 DR 11 3 PEI11HB4PF3
4" 160 DR 9 14 1/4 x 5 x 8 1/2 4 PEI9HB4PF3
4.500" 200 DR 7 5 PEI7HB4PF3
128 DR 11 8 PEI11HB4UF3
6" 160 DR 9 15 1/4 x 6 x 10 10 PEI9HB4UF3
6.625" 200 DR 7 12 PEI7HB4UF3
128 DR 11 15 PEI11HB4XF3
8" 160 DR 9 16 1/4 x 6 1/2 x 10 7/8 18 PEI9HB4XF3
8.625" 200 DR 7 22 PEI7HB4XF3
80 DR 17 16 PEI17HB410F3
10" 128 DR 11 24 PEI11HB410F3
17 1/4 x 6 1/2 x 11 1/4
10.750" 160 DR 9 29 PEI9HB410F3
200 DR 7 35 PEI7HB410F3
80 DR 17 27 PEI17HB412F3
12" 128 DR 11 40 PEI11HB412F3
19 1/2 x 8 x 13 1/2
12.750" 160 DR 9 48 PEI9HB412F3
200 DR 7 60 PEI7HB412F3
14" 80 DR 17 34 PEI17HB414F3
128 DR 11 21 x 8 x 13 7/8 50 PEI11HB414F3
14.000"
160 DR 9 60 PEI9HB414F3
200 DR 7 74 PEI7HB414F3
80 DR 17 46 PEI17HB416F
16" 128 DR 11 70 PEI11HB416F3
24 x 8 x 14 3/4
16.000" 160 DR 9 83 PEI9HB416F3
200 DR 7 99 PEI7HB416F3
44
9/5/14
Part #
Nominal Size Pressure Feed Dimension Weight per
List Price
Actual OD Class (psi) Stock R x C x B (in) Item (lbs)
Un-Machined
80 DR 17 62 PEI17HB418F3
18" 128 DR 11 92 PEI11HB418F3
27 x 8 x 15 5/8
18.000" 160 DR 9 111 PEI9HB418F3
200 DR 7 132 PEI7HB418F3
80 DR 17 80 PEI17HB420F3
20" 128 DR 11 121 PEI11HB420F3
30 x 8 x 16 1/2
20.000" 160 DR 9 144 PEI9HB420F3
200 DR 7 171 PEI7HB420F3
80 DR 17 104 PEI17HB422F3
22" 128 DR 11 153 PEI11HB422F3
33 x 8 x 17 1/4
22.000" 160 DR 9 183 PEI9HB422F3
200 DR 7 219 PEI7HB422F3
80 DR 17 129 PEI17HB424F3
24" 128 DR 11 191 PEI11HB424F3
36 x 8 x 18 1/8
24.000" 160 DR 9 228 PEI9HB424F3
200 DR 7 272 PEI7HB424F3
80 DR 17 209 PEI17HB426F3
26" 128 DR 11 323 PEI11HB426F3
39 x 14 x 25
26.000" 160 DR 9 371 PEI9HB426F3
200 DR 7 443 PEI7HB426F3
80 DR 17 250 PEI17HB428F3
28" 128 DR 11 42 x 14 x 25 7/8 372 PEI11HB428F3
28.000" 160 DR 9 444 PEI9HB428F3
80 DR 17 296 PEI17HB430F3
30" 128 DR 11 45 x 14 x 26 5/8 441 PEI11HB430F3
30.000"
160 DR9 526 PEI9HB430F3
80 DR 17 347 PEI17HB432F3
32" 48 x 14 x 27 1/2
32.000" 128 DR 11
516 PEI11HB432F3
45
9/5/14
Part #
Nominal Size Pressure Feed Dimension Weight per
List Price
Actual OD Class (psi) Stock R x C x B (in) Item (lbs)
Un-Machined
80 DR 17 404 PEI17HB434F3
34" 51 x 14 x 28 3/8
34.000" 128 DR 11
601 PEI11HB434F3
80 DR 17 466 PEI17HB436F3
36" 54 x 14 x 29 1/4
36.000" 128 DR 11 693 PEI11HB436F3
42" 65 DR 21 691 PEI21HB442F3
63 x 21 x 38 3/4
42.000" 80 DR 17 844 PEI17HB442F3
48" 65 DR 21 960 PEI21HB448F3
72 x 21 x 41 1/4
48.000" 80 DR 17 1171 PEI17HB448F3
50 DR 26 1051 PEI26HB454F3
54" 81 x 21 x 43 3/4
54.000" 65 DR 21 1287 PEI21HB454F3
46
9/5/14
80 DR 17 14 PEI17HB9XF3
8” 128 DR 11 20 PEI11HB9XF3
10 3/4 X 6 1/2 X 14 5/8
8.625” 160 DR 9 23 PEI9HB9XF3
200 DR 7 29 PEI7HB9XF3
80 DR 17 21 PEI17HB910F3
10” 128 DR 11
12 5/8 x 6 1/2 x 16 1/8
31 PEI11HB910F3
10.750” 160 DR 9 37 PED9HB910F3
200 DR 7 43 PEI7HB910F3
12” 80 DR 17 34 PEI17HB912F3
12.750” 128 DR 11 51 PEI11HB912F3
13 5/8 x 8 x 18 5/8
160 DR 9 61 PEI9HB912F3
200 DR 7 72 PEI7HB912F3
14” 80 DR 17 42 PEI17HB914F3
14.000” 128 DR 11 62 PEI11HB914F3
14 1/4 x 8 x 19 1/4
160 DR 9 75 PEI9HB914F3
200 DR 7 89 PEI7HB914F3
16” 80 DR 17 56 PEI17HB916F3
16.000” 128 DR 11 84 PEI11HB916F3
15 1/4 x 8 x 20 1/4
160 DR 9 100 PEI9HB916F3
200 DR 7 120 PEI7HB916F3
18” 80 DR 17 76 PEI17HB918F3
18.000” 128 DR 11 113 PEI11HB918F3
16 1/4 x 8 x 21 1/4
160 DR 9 135 PEI9HB918F3
200 DR 7 161 PEI7HB918F3
20” 80 DR 17 98 PEI17HB920F3
20.000” 128 DR 11 147 PEI11HB920F3
17 1/4 x 8 x 22 1/4
160 DR 9 175 PEI9HB920F3
200 DR 7 209 PEI7HB920F3
22” 80 DR 17 134 PEI17HB922F3
22.000” 128 DR 11 201 PEI11HB922F3
23 1/16 x 8 x 26 1/16
160 DR 9 239 PEI9HB922F3
200 DR 7 286 PEI7HB922F3
80 DR 17 167 PEI17HB924F3
24” 128 DR 11
24 1/16 x 8 x 27 1/16
250 PEI11HB924F3
24.000” 160 DR 9 298 PED9HB924F3
200 DR 7 356 PEI7HB924F3
47
Dimensions and weights are approximate and subject to change
9/5/14
80 DR 17 352 PEI17HB928F3
28Ӡ 128 DR 11 38 3/16 x 14 x 42 3/16 525 PEI11HB928F3
28.000” 160 DR 9 626 PEI9HB928F3
80 DR 17 410 PEI17HB930F3
30Ӡ 128 DR 11 38 5/16 x 14 x 42 5/8 611 PEI11HB930F3
30.000” 160 DR 9 729 PEI9HB930F3
80 DR 17 473 PEI17HB932F3
32Ӡ 38 3/8 x 14 x 43 1/8
32.000” 128 DR 11 705
PEI11HB932F3
80 DR 17 542 PEI17HB934F3
34Ӡ 38 7/16 x 14 x 43 9/16
34.000” 128 DR 11 807 PEI11HB934F3
80 DR 17 616 PEI17HB936F3
36Ӡ 38 1/2 x 14 x 44
36.000” 128 DR 11 917 PEI11HB936F3
42Ӡ 65 DR 21 925 PEI21HB942F3
50 5/16 x 21 x 59 3/16
42.000” 80 DR 17 1,129 PEI17HB942F3
48” 65 DR 21 1,244 PEI21HB948F3
50 9/16 x 21 x 60 9/16
48.000” 80 DR 17 1,518 PEI17HB948F3
54” 50 DR 26 1,284 PEI26HB954F3
50 3/4 x 21 x 61 15/16
54.000” 65 DR 21 1,605 PEI21HB954F3
48
Dimensions and weights are approximate and subject to change
9/5/14
14" 80 DR 17 54 PEI17HB914F5
128 DR 11 21 x 8 x 26 1/4 81 PEI11HB914F5
14.000"
160 DR 9 97 PEI9HB914F5
200 DR 7 120 PEI7HB914F5
80 DR 17 77 PEI17HB916F5
16" 128 DR 11 115 PEI11HB916F5
24 x 8 x 28 7/8
16.000" 160 DR 9 137 PEI9HB916F5
200 DR 7 164 PEI7HB916F5
80 DR 17 106 PEI17HB918F5
18" 128 DR 11 158 PEI11HB918F5
27 x 8 x 31 3/8
18.000" 160 DR 9 189 PEI9HB918F5
200 DR 7 225 PEI7HB918F5
80 DR 17 141 PEI17HB920F5
20" 128 DR 11 210 PEI11HB920F5
30 x 8 x 34
20.000" 160 DR 9 251 PEI9HB920F5
200 DR 7 300 PEI7HB920F5
80 DR 17 183 PEI17HB922F5
22" 128 DR 11 273 PEI11HB922F5
33 x 8 x 36 5/8
22.000" 160 DR 9 325 PEI9HB922F5
200 DR 7 389 PEI7HB922F5
80 DR 17 232 PEI17HB924F5
24" 128 DR 11 346 PEI11HB924F5
36 x 8 x 39 1/4
24.000" 160 DR 9 413 PEI 9HB924F5
200 DR 7 493 PEI7HB924F5
80 DR 17 376 PEI17HB926F5
26" 128 DR 11 583 PEI11HB926F5
39 x 14 x 47 7/8
26.000" 160 DR 9 669 PEI9HB926F5
200 DR 7 800 PEI7HB926F5
80 DR 17 415 PEI17HB928F5
28" 128 DR 11 42 x 14 x 50 3/8 619 PEI11HB928F5
28.000" 160 DR 9 739 PEI9HB928F5
30" 80 DR 17 500 PEI17HB930F5
128 DR 11 45 x 14 x 53 744 PEI11HB930F5
30.000" 160 DR 9 888 PEI9HB930F5
80 DR 17 594 PEI17HB932F5
32"
32 48 x 14 x 55 5/8 PEI11HB932F5
32.000" 128 DR 11 885
IPS SWEEP 90
CFP = CALL FOR PRICE
Size (IPS) Pressure
Radius List Part #
Class (psi) Feed Weight
200 DR 9 3 P29LS90
2" 160 DR 11 2.0 7.13 P211LS90
100 DR 17 2.0 P217LS90
200 DR 9 5.0 P39LS90
3" 160 DR 11 4.0 10.5 P311LS90
100 DR 17 3.0 P317LS90
200 DR 9 8.0 P49LS90
4" 160 DR 11 7.0 13.5 P411LS90
100 DR 17 6.0 P417LS90
200 DR 9 24.0 P69LS90
6" 160 DR 11 20.0 19.9 P611LS90
100 DR 17 14.0 P617LS90
200 DR 9 50.0 P89LS90
8" 160 DR 11 44.0 24.5 P811LS90
100 DR 17 19.0 P817LS90
200 DR 9 101.0 P109LS90
10" 160 DR 11 85.0 32.25 P1011LS90
100 DR 17 57.0 P1017LS90
200 DR 9 165.0 P129LS90
12" 160 DR 11 138.0 38.3 P1211LS90
100 DR 17 93.0 P1217LS90
200 DR 9 202.0 P149LS90
14" 160 DR 11 169.0 38.9 P1411LS90
100 DR 17 114.0 P1417LS90
52
9/5/14
128 DR 11 2 PED11HB225PF2
4"
160 DR 9 14 1/4 X 5 X 5 1/2 3 PED9HB225PF2
4.800" 200 DR 7 4 PED7HB225PF2
128 DR 11 6 PED11HB225UF2
6"
160 DR 9 15 1/4 X 6 X 6 5/8 7 PED9HB225UF2
6.900" 200 DR 7 8 PED7HB225UF2
128 DR 11 10 PED11HB225XF2
8"
160 DR 9 16 1/4 X 6 1/2 X 7 3/8 12 PED9HB225XF2
9.050" 200 DR 7 17 PED7HB225XF2
80 DR 17 11 PED17HB22510F2
10" 128 DR 11 17 PED11HB22510F2
17 1/4 X 6 1/2 X 7 5/8
11.100" 160 DR 9 20 PED9HB22510F2
200 DR 7 26 PED7HB22510F2
80 DR 17 19 PED17HB22512F2
12" 128 DR 11 28 PED11HB22512F2
19 1/2 X 8 X 9 1/4
13.200" 160 DR 9 34 PED9HB22512F2
200 DR 7 45 PED7HB22512F2
14" 80 DR 17 27 PED17HB22514F2
128 DR 11 41 PED11HB22514F2
15.300" 21 X 8 X 9 3/8
160 DR 9 49 PED9HB22514F2
200 DR 7 61 PED7HB22514F2
80 DR 17 39 PED17HB22516F2
16" 128 DR 11 55 PED11HB22516F2
24 X 8 X 9 3/8
17.400" 160 DR 9 65 PED9HB22516F2
200 DR 7 81 PED7HB22516F2
80 DR 17 47 PED17HB22518F2
18" 128 DR 11 70 PED11HB22518F2
27 X 8 X9 3/4
19.500" 160 DR 9 84 PED9HB22518F2
200 DR 7 104 PED7HB22518F2
80 DR 17 60 PED17HB22520F2
20" 128 DR 11 88 PED11HB22520F2
30 X 8 X 10
21.600" 160 DR 9 105 PED9HB22520F2
200 DR 7 130 PED7HB22520F2
80 DR 17 138 PED17HB22524F2
24" 128 DR 11 206 PED11HB22524F2
36 X 14 X 16 3/8
25.800" 160 DR 9 246 PED9HB22524F2
200 DR 7 304 PED7HB22524F2
53
9/5/14
128 DR 11 3 PED11HB4PF2
4" 160 DR 9 6 x 5 1/2 x 6 1/2 4 PED9HB4PF2
4.800" 200 DR 7 5 PED7HB4PF2
128 DR 11 8 PED11HB4UF2
6" 160 DR 9 9 1/2 x 6 x 7 3/8 9 PED9HB4UF2
6.900" 200 DR 7 10 PED7HB4UF2
128 DR 11 15 PED11HB4XF2
8" 160 DR 9 10 1/2 x 6 1/2 x 8 3/8 18 PED9HB4XF2
9.050" 200 DR 7 20 PED7HB4XF2
80 DR 17 16 PED17HB410F2
10" 128 DR 11 24 PED11HB410F2
12 3/4 x 6 1/2 x 10 3/4
11.100" 160 DR 9 29 PED9HB410F2
200 DR 7 38 PED7HB410F2
80 DR 17 27 PED17HB412F2
12" 128 DR 11 40 PED11HB412F2
13 7/8 x 8 1/2 x 11 1/4
13.200" 160 DR 9 48 PED9HB412F2
200 DR 7 54 PED7HB412F2
14" 80 DR 17 34 PED17HB414F2
128 DR 11 50 PED11HB414F2
15.300" 14 7/8 x 8 1/2 x 11 5/8
160 DR 9 60 PED9HB414F2
200 DR 7 75 PED7HB414F2
80 DR 17 55 PED17HB416F2
16" 128 DR 11 82 PED11HB416F2
16 x 8 1/2 x 13 5/8
17.400" 160 DR 9 97 PED9HB416F2
200 DR 7 114 PED7HB416F2
80 DR 17 73 PED17HB418F2
18" 128 DR 11 108 PED11HB418F2
17 X 8 1/2 X14
19.500" 160 DR 9 129 PED9HB418F2
200 DR 7 148 PED7HB418F2
80 DR 17 101 PED17HB420F2
20" 128 DR 11 128 PED11HB420F2
22 7/8 X 8 1/2 X14 1/2
21.600" 160 DR 9 152 PED9HB420F2
200 DR 7 189 PED7HB420F2
80 DR 17 157 PED17HB424F2
24" 128 DR 11 195 PED11HB424F2
25 X 8 1/2 X15 3/8
25.800" 160 DR 9 233 PED9HB424F2
128 DR 7 288 PED7HB424F2
54
9/5/14
55
9/5/14
IPS MOLDED 90
56
9/5/14
IPS MOLDED 90
DR 7 27.2 PEI7AB9U
DR 9 26.8 PEI9AB9U
6" IPS DR 11/11.5 4.38 X 9 17.3 PEI11AB9U
DR 13.5
16.6
DR 17 PEI17AB9U
DR 7 PEI7AB9X
26.5
DR 9 PEI9AB9X
8" IPS DR 11 6.00 X 12 PEI11AB9X
DR 13.5 20.2
DR 17 PEI17AB9X
DR17 PEI17AB910
10" IPS 6.00 x 13.25 37.5
DR11 PEI11AB910
DR17 PEI17AB912
12" IPS 7.50 X 15.88 67
DR11 PEI11AB912
57
9/5/14
DIPS 90 ELL
Standard
PART #
Nominal Size Pressure SDR Dimensions Weight per List Price
Actual OD Class (psi) AxB (in) Item Item (lbs.)
160 11 11 PED11AB9U
6” 5.1 x 9.67 Y
6.90”
IPS MOLDED 45
59
9/5/14
Weight
Nominal Size Pressure Feed Dimension List Price
per Part #
Actual OD Class (psi) Stock A x C x E (in) Un-Machined
Item (lbs)
80 DR 17 PED17HBTPF
4" 128 DR 11 7 PED11HBTPF
6 x 16.8 x 6
4.800" 160 DR 9 9 PED9HBTPF
200 DR 7 11 PED7HBTPF
80 DR 17 PED17HBTUF
6" 128 DR 11 15 PED11HBTUF
6 x 18.9 x 6
6.900" 160 DR 9 18 PED9HBTUF
200 DR 7 23 PED7HBTUF
80 DR 17 PED17HBTXF
8" 128 DR 11 31 PED11HBTXF
8 x 25 x 8
9.050" 160 DR 9 37 PED9HBTXF
200 DR 7 46 PED7HBTXF
80 DR 17 35 PED17HBT10F
10" 128 DR 11 52 PED11HBT10F
8 x 27.1 x 8
11.100" 160 DR 9 62 PED9HBT10F
200 DR 7 76 PED7HBT10F
80 DR 17 59 PED17HBT12F
12" 128 DR 11 88 PED11HBT12F
8 x 29.2 x 8
13.200" 160 DR 9 105 PED9HBT12F
200 DR 7 129 PED7HBT12F
80 DR 17 86 PED17HBT14F
14" 128 DR 11 128 PED11HBT14F
9 x 33.3 x 9
15.300" 160 DR 9 153 PED9HBT14F
200 DR 7 189 PED7HBT14F
80 DR 17 119 PED17HBT16F
16" 128 DR 11 178 PED11HBT16F
9 x 33.3 x 9
17.400" 160 DR 9 212 PED9HBT16F
200 DR 7 262 PED7HBT16F
80 DR 17 100 PED17HBT18F
18" 128 DR 11 260 PED11HBT18F
10 x 39.5 x 10
19.50" 160 DR 9 310 PED9HBT18F
200 DR 7 384 PED7HBT18F
80 DR 17 226 PED17HBT20F
20" 128 DR 11 336 PED11HBT20F
10 x 41.6 x 10
21.60" 160 DR 9 402 PED9HBT20F
200 DR 7 498 PED7HBT20F
80 DR 17 564 PED17HBT24F
24" 128 DR 11 840 PED11HBT24F
12 x 49.8 x 12
25.80" 160 DR 9 1003 PED9HBT24F
200 DR 7 1240 PED7HBT24F
68
Dimensions and weights are approximate and subject to change
9/5/14
69
9/5/14
DIPS TEE
Dimensions Package
DR/Wall LIST PART #
AxBXCXDXE (in) Weight (lbs.)
Butt Tee 0.090
71
9/5/14
80 DR 17 316 PEI17HBC28F
28" 128 DR 11 14 x 56 433 PEI11HBC28F
160 DR 9 620 PEI9HBC28F
80 DR 17 316 PEI17HBC30F
30" 128 DR 11
14 x 58
433 PEI11HBC30F
80 DR 17 316 PEI17HBC32F
32" 128 DR 11
14 x 60
433 PEI11HBC32F
80 DR 17 316 PEI17HBC36F
36" 128 DR 11
20 X 76
433 PEI11HBC36F
72
9/5/14
128 DR 11 10 PED11HBCPF
4" 160 DR 9
4 x 12 3/4
15 PED9HBCPF
128 DR 11 21 PED11HBCUF
6" 160 DR 9
6 x 18 7/8
31 PED9HBCUF
128 DR 11 42 PED11HBCXF
8" 160 DR 9
6 1/2 x 22
62 PED9HBCXF
128 DR 11 69 PED11HBC10F
10" 160 DR 9
8 x 27 1/8
102 PED9HBC10F
128 DR 11 123 PED11HBC12F
12" 160 DR 9
8 x 29 1/4
182 PED9HBC12F
128 DR 11 170 PED11HBC14F
14" 160 DR 9
8n x 31 1/4
252 PED9HBC14F
128 DR 11 232 PED11HBC16F
16" 160 DR 9
14 x 45 3/8
343 PED9HBC16F
128 DR 11 307 PED11HBC18F
18" 160 DR 9
14 x 47 1/2
453 PED9HBC18F
128 DR 11 405 PED11HBC20F
20" 160 DR 9
14 x 49 5/8
597 PED9HBC20F
128 DR 11 644 PED11HBC24F
24" 160 DR 9
14 x 53 3/4
950 PED9HBC24F
30" 128 DR 11 1098 PED11HBC30F
73
9/5/14
74
9/5/14
63 DR 17 325 PEI17HBY20F
20"
100 DR 11 78 x 12 x 62 485 PEI11HBY20F
20.00" 126 DR 9 PEI9HBY20F
63 DR 17 411 PEI17HBY22F
22"
100 DR 11 80 x 12 x 63 1/2 613 PEI11HBY22F
22.000" 126 DR 9 PEI9HBY22F
63 DR 17 510 PEI17HBY24F
24"
100 DR 11 82 x 12 x 65 760 PEI11HBY24F
24.00" 126 DR 9 PEI9HBY24F
75
9/5/14
4" IPS 4.7R ASTM D2513/F1055-GAS AWWA C906 FM 1610 CL 200 C10000360
6" IPS 4.7R ASTM D2513/F1055-GAS AWWA C906 FM 1610 CL 200 C10000359
8" IPS 4.7R ASTM D2513/F1055-GAS AWWA C906 FM 1610 CL 200 C10000361
10" IPS 4.7S ASTM 02513/F1055 AWWA C906 FM 1610 CL150 C10000362
12" IPS 4.7R ASTM 025131F1055 AWWA C906 FM 1610 CL150 C10000363
78
9/5/14
79
9/5/14
80
9/5/14
81
ELECTROFUSION FITTINGS FULL COUPLINGS
9/5/14
FOR REFERENCE ONLY
LARGE DIAMETER DIPS
Georg Fischer Central Plastics LLC Phone: 800-654-3872 PLOW-IN STYLE SINGLE COIL
39605 Independence St. 405-273-6302
Shawnee, OK USA 74801 Fax: 800-733-5993
www.centralplastics.com 405-273-5993
NOMINAL INSIDE DIA. INSIDE DIA. OUTSIDE DIA. STAB DEPTH OVERALL LENGTH
SIZE (MAXIMUM) (MINIMUM) (NOMINAL) (NOMINAL) (NOMINAL)
I.D. I.D. O.D. D L
4 DIPS 4.846 4.810 6.06 3.46 6.93
123.09 mm 122.17 mm 154.0 mm 88.0 mm 176.0 mm
6 DIPS 6.966 6.925 8.74 4.09 8.19
176.94 mm 175.90 mm 222.0 mm 104.0 mm 208.0 mm
8 DIPS 9.140 9.110 11.14 5.08 10.16
232.16 mm 231.39 mm 283.0 mm 129.0 mm 258.0 mm
10 DIPS 11.110 11.080 13.7 5.5 10.9
282.19 mm 281.43 mm 347 mm 139 mm 278 mm
12 DIPS 13.210 13.180 16.2 6.4 12.8
335.53 mm 334.77 mm 412 mm 163 mm 326 mm
82
EF LDC 4-12 DIPS SINGLE COIL PLOW-IN 02/06/09
FULL COUPLINGS
ELECTOFUSION FITTINGS
9/5/14
LARGE DIAMETER IPS SDR 11 PLOW-IN STYLE SINGLE COIL
83
FULL COUPLINGS
ELECTOFUSION FITTINGS
9/5/14
LARGE DIAMETER IPS SDR 11 PLOW-IN STYLE DUAL COIL
84
9/5/14
85
FULL COUPLINGS
ELECTOFUSION FITTINGS
9/5/14
LARGE DIAMETER DIPS DR 11 PLOW-IN STYLE DUAL COIL
86
9/5/14
Many industrial facilities require the FM Global approval for the plant piping
components. Major insurance companies that focus on insuring large
manufacturing facilities have found that risk was reduced when the fire and
safety piping systems in a facility met the standards recognized by Factory
Mutual.
FM Global
Approved
1. (www.fmglobal.com)
87
9/5/14
Material Standards
Industrial Plastics Division manufactures FM Global approved HDPE fittings from
HDPE pipe that is produced per ASTM D 3350-02 to a cell classification of
345464C.
All FM Global HDPE fittings produced at our manufacturing facility have passed
the requirements listed by FM Global. These fittings have passed our strict
testing and quality control system. Our quality control system provides a marking
on the product that is permanent and can not be altered or removed.
Manufacturing Standards
Industrial Plastics Division manufactures the HDPE FM fittings using state of the
art fusion machinery. All fittings are made using a data logging system to insure
all parts of the fusion process are in compliance and traceable. Industrial Plastics
Division also marks the fittings with a stamp to insure that the fitting can always
be traced back to the manufacturing information. Industrial Plastics Division is the
only HDPE fitting manufacturer to add this level of control.
FM Global
88
9/5/14
Approved
Industrial Plastics Division Polyethylene FM Catalog
Table 1____________________________________________________
89
9/5/14
FINISH
Weight
IPS Size PC SDR A C List Price Product Code
(lbs)
Supplements
DWG 14
12/14/2009
* Dimensions and weights are approximate and subject to change.
90
9/5/14
FINISH
Weight
IPS Size PC SDR R A C LIST PRICE Product Code
(lbs)
DWG 1
Last Update
11/17/2009
* Dimensions and weights are approximate and subject to change.
91
9/5/14
FINISH
Weight
IPS Size PC SDR R A C LIST PRICE Product Code
(lbs)
DWG 2
Last Update
11/17/2009
* Dimensions and weights are approximate and subject to change.
92
9/5/14
IPS Fabricated 3-Segment 90۫ º ELL
All sizes up to 24" conform to AWWA C906 Requirements.
Pressure Ratings are for water at 73.4۫ F.
FINISH
Weight LIST
IPS Size PC SDR R A C Product Code
(lbs) PRICE
DWG 3
Last Update
11/17/2009
* Dimensions and weights are approximate and subject to change.
93
9/5/14
FINISH
Weight
IPS Size PC SDR R A C LIST PRICE Product Code
(lbs)
DWG 4
Last Update
11/17/2009
* Dimensions and weights are approximate and subject to change.
94
9/5/14
FINISH
Weight
IPS Size PC SDR A C E LIST PRICE Product Code
(lbs)
DWG 5
Last Update
11/17/2009
* Dimensions and weights are approximate and subject to change.
95
9/5/14
FINISH
Weight
IPS Size PC SDR A B L LIST PRICE Product Code
(lbs)
200 7 33 PEI7FMBTXMF
8"x8"x3" 6 1/2 12 17
150 9 30 PEI9FMBTXMF
200 7 43 PEI7FMBT10MF
10"x10"x3" 6 1/2 13 17
150 9 37 PEI9FMBT10MF
200 7 59 PEI7FMBT12MF
12"x12"x3" 8 14 20
150 9 51 PEI9FMBT12MF
200 7 67 PEI7FMBT14MF
14"x14"x3" 8 15 20
150 9 58 PEI9FMBT14MF
200 7 83 PEI7FMBT16MF
16"x16"x3" 8 16 20
150 9 71 PEI9FMBT16MF
200 7 100 PEI7FMBT18MF
18"x18"x3" 8 17 20
150 9 86 PEI9FMBT18MF
200 7 119 PEI7FMBT20MF
20"x20"x3" 8 18 20
150 9 102 PEI9FMBT20MF
200 7 164 PEI7FMBT24MF
24"x24"x3" 8 20 20
150 9 139 PEI9FMBT24MF
DWG 5.75
NEW
6/25/2010
FINISH
Weight
IPS Size PC SDR A B L LIST PRICE Product Code
(lbs)
200 7 35 PEI7FMBTXPF
8"x8"x4" 6 1/2 12 18
150 9 32 PEI9FMBTXPF
200 7 45 PEI7FMBT10PF
10"x10"x4" 6 1/2 13 18
150 9 39 PEI9FMBT10PF
200 7 61 PEI7FMBT12PF
12"x12"x4" 8 14 21
150 9 53 PEI9FMBT12PF
200 7 69 PEI7FMBT14PF
14"x14"x4" 8 15 21
150 9 60 PEI9FMBT14PF
200 7 85 PEI7FMBT16PF
16"x16"x4" 8 16 21
150 9 73 PEI9FMBT16PF
200 7 102 PEI7FMBT18PF
18"x18"x4" 8 17 21
150 9 88 PEI9FMBT18PF
200 7 121 PEI7FMBT20PF
20"x20"x4" 8 18 21
150 9 104 PEI9FMBT20PF
200 7 166 PEI7FMBT24PF
24"x24"x4" 8 20 21
150 9 141 PEI9FMBT24PF
DWG 6
Last Update
11/17/2009
* Dimensions and weights are approximate and subject to change.
97
9/5/14
IPS Saddle Reducing Tees 6" Branch
All saddle reducing tees thru 24" mains conform to
AWWA C906 Requirements.
Pressure Ratings are for water at 73.4۫ F.
FINISH
Weight
IPS Size PC SDR A B L LIST PRICE Product Code
(lbs)
200 7 45 PEI7FMBT10UF
10"x10"x6" 6 1/2 15 20
150 9 39 PEI9FMBT10UF
200 7 61 PEI7FMBT12UF
12"x12"x6" 8 16 23
150 9 53 PEI9FMBT12UF
200 7 69 PEI7FMBT14UF
14"x14"x6" 8 17 23
150 9 60 PEI9FMBT14UF
200 7 85 PEI7FMBT16UF
16"x16"x6" 8 18 23
150 9 73 PEI9FMBT16UF
200 7 117 PEI7FMBT18UF
18"x18"x6" 8 19 23
150 9 99 PEI9FMBT18UF
200 7 138 PEI7FMBT20UF
20"x20"x6" 8 20 23
150 9 118 PEI9FMBT20UF
200 7 188 PEI7FMBT24UF
24"x24"x6" 8 22 23
150 9 159 PEI9FMBT24UF
DWG 7
Last Update
11/17/2009
* Dimensions and weights are approximate and subject to change.
98
9/5/14
FINISH
IPS Size SDR A B L Weight
PC LIST PRICE Product Code
(lbs)
200 7 100 PEI7FMBT12XF
12"x12"x8" 8 17 25
150 9 89 PEI9FMBT12XF
200 7 110 PEI7FMBT14XF
14"x14"x8" 8 18 25
150 9 97 PEI9FMBT14XF
200 7 129 PEI7FMBT16XF
16"x16"x8" 8 19 25
150 9 113 PEI9FMBT16XF
200 7 149 PEI7FMBT18XF
18"x18"x8" 8 20 25
150 9 129 PEI9FMBT18XF
200 7 172 PEI7FMBT20XF
20"x20"x8" 8 21 25
150 9 149 PEI9FMBT20XF
200 7 225 PEI7FMBT24XF
24"x24"x8" 8 23 25
150 9 194 PEI9FMBT24XF
DWG 8
Last Update
11/17/2009
* Dimensions and weights are approximate and subject to change.
99
9/5/14
IPS Saddle Reducing Tees 10" Branch
All saddle reducing tees thru 24" mains conform to
AWWA C906 Requirements.
Pressure Ratings are for water at 73.4۫ F.
FINISH
IPS Size SDR A B L Weight
PC LIST PRICE Product Code
(lbs)
200 7 138 PEI7FMBT1410F
14"x14"x10" 8 18 27
150 9 122 PEI9FMBT1410F
200 7 158 PEI7FMBT1610F
16"x16"x10" 8 19 27
150 9 139 PEI9FMBT1610F
200 7 180 PEI7FMBT1810F
18"x18"x10" 8 20 27
150 9 157 PEI9FMBT1810F
200 7 205 PEI7FMBT2010F
20"x20"x10" 8 21 27
150 9 178 PEI9FMBT2010F
200 7 262 PEI7FMBT2410F
24"x24"x10" 8 23 27
150 9 226 PEI9FMBT2410F
DWG 9
Last Update
11/17/2009
* Dimensions and weights are approximate and subject to change.
100
9/5/14
FINISH
Weight
IPS Size PC SDR A B L LIST PRICE Product Code
(lbs)
200 7 181 PEI7FMBT1612F
16"x16"x12" 8 20 29
150 9 158 PEI9FMBT1612F
200 7 208 PEI7FMBT1812F
18"x18"x12" 8 21 29
150 9 178 PEI9FMBT1812F
200 7 230 PEI7FMBT2012F
20"x20"x12" 8 22 29
150 9 199 PEI9FMBT2012F
200 7 291 PEI7FMBT2412F
24"x24"x12" 8 24 29
150 9 251 PEI9FMBT2412F
DWG 10
Last Update
11/17/2009
* Dimensions and weights are approximate and subject to change.
101
9/5/14
IPS FABRICATED Reducers
Dimension Weight
IPS Size PC LIST PRICE Product Code
L (lbs)
200 43 PEI9FMBR1412
14"IPS x 12"IPS 20
150 36 PEI11FMBR1412
200 57 PEI9FMBR1614
16" IPSx 14" IPS 20
150 48 PEI11FMBR1614
200 77 PEI9FMBR1816
18" IPSx 16"IPS 20
150 64 PEI11FMBR1816
200 99 PEI9FMBR2018
20" IPS x 18"IPS 20
150 83 PEI11FMBR2018
200 147 PEI9FMBR2420
24" IPS x 20" IPS 20
150 123 PEI11FMBR2420
DWG 11
Last Update
11/17/2009
* Dimensions and weights are approximate and subject to change.
102
9/5/14
IPS FLANGE ADAPTER
PE 3408 HDPE
All sizes up to 24" conform to AWWA C906 Requirements.
Pressure Ratings are for water at 73.4۫ F.
DIMENSIONS
Weight LIST PRICE
IPS Size PC A T C Product Code
(lbs)
DWG 12
Last Update
11/17/2009
* Dimensions and weights are approximate and subject to change.
103
9/5/14
Ductile Iron Back-Up Ring
Medium pressure flange for use on HDPE, SS and carbon steel stub ends
Cast in ductile iron A536 (65/45/12) tensile 65,000 psi; yeild 45,000 psi; 12% elongation
Bolt circle is ANSI/B16.5 class 150. Mates with ANSIB16.5, B16.47, AWWA C207
Fishished in red oxide primer, hot dipped galvanized, epoxy coated
WEIGHT FM
IPS Size O.D. T I.D B.D B.C LIST PRICE Product Code
( LBS ) 150 200
DWG 13
Last Update
11/17/2009
* Dimensions and weights are approximate and subject to change.
104
9/5/14
IPS MJ Adaptor
Pressure Ratings are for water at 73.4۫ F.
DWG SO-1
Last Update
2/23/2010
DWG SO-2
Last Update
2/23/2010
* Dimensions and weights are approximate and subject to change.
106
9/5/14
IPS Molded 90
Pressure Ratings are for water at 73.4۫ F.
DWG SO-3
Last Update
2/23/2010
* Dimensions and weights are approximate and subject to change.
107
9/5/14
Dimension Weight
Nominal Size PC LIST PRICE Product Code
(L) (lbs)
** FABRICATED
DWG SO-4
Last Update
2/23/2010
* Dimensions and weights are approximate and subject to change.
108
9/5/14
IPS Molded Reducer
Pressure Ratings are for water at 73.4۫ F.
Dimensions Weight
Nominal Size PC LIST PRICE Product Code
L x A x B (in) (lbs)
DWG SO-5
Last Update
2/23/2010
* Dimensions and weights are approximate and subject to change.
109
9/5/14
IPS Molded TEE
Pressure Ratings are for water at 73.4۫ F.
Dimensions
Nominal Size PC Weight (lbs) LIST PRICE Product Code
A x B x L (in)
DWG SO-6
Last Update
2/23/2010
* Dimensions and weights are approximate and subject to change.
110
9/5/14
applicable to:
The sale, fabrication, and wholesale distribution of pipe, pipe fittings, specialty products,
and related industrial products; rental of related industrial equipment.
K
EAC Code: 29
f
Page 1 of 3
111
This approval is subject to the company maintaining its system to the required standard, which will be monitored by NQA, USA, an
accredited organization under the ANSI-ASQ National Accreditation Board.
9/5/14
Page 2 of 3
112
This approval is subject to the company maintaining its system to the required standard, which will be monitored by NQA, USA, an
accredited organization under the ANSI-ASQ National Accreditation Board.
9/5/14
Page 3 of 3
113
This approval is subject to the company maintaining its system to the required standard, which will be monitored by NQA, USA, an
accredited organization under the ANSI-ASQ National Accreditation Board.