Professional Documents
Culture Documents
Epacad: Developed by Ita Universidad Politécnica de Valencia WWW - Ita.Upv - Es
Epacad: Developed by Ita Universidad Politécnica de Valencia WWW - Ita.Upv - Es
Developed by ITA
Universidad Politécnica de Valencia
www.ita.upv.es
EpaCAD allows converting AutoCAD files which contain pipes
into files that can be opened with EPANET, the most popular
water distribution system analysis program
PROGRAM HELP
Open
File should have .dxf extension (AutoCAD allows to save files with this
extension). EpaCAD program reads files saved as dxf from AutoCAD
R12/LT2/2000/LT2000/2004 and later versions.
1st Select the layers which contain the pipes of model (a single or
Pipe layers multiple selection is allowed).
selection
2nd Indicate the conversion mode of the polylines of the selected
Conversion layers.
Mode
There are two options:
• Vertex Mode:
• Node Mode:
T1
T2
Once the network has been converted, EpaCAD shows a previsualization.
If the previsualization is correct press FINALIZE bottom indicating the path where
the .inp file must be saved later.
Another icons of the program:
Launching
Information