The document provides configuration instructions for a Magnum 10KT managed switch. It consists of 5 steps:
1) Choose the chassis and power input type
2) If using hot-swappable power supplies, choose the power supply modules
3) Choose modules for gigabit slots A and/or B which may include timing and RJ45 or SFP ports
4) Choose 1 port modules for slots C-J which can include RJ45, fiber, or SFP ports
5) Choose any optional extras
The configuration is flexible with 10 modular slots and options for up to 4Gb ports and 32 fiber or copper ports.
Original Description:
Magnum 10KT Managed Switch, base unit is configurable hardened managed switch.
The document provides configuration instructions for a Magnum 10KT managed switch. It consists of 5 steps:
1) Choose the chassis and power input type
2) If using hot-swappable power supplies, choose the power supply modules
3) Choose modules for gigabit slots A and/or B which may include timing and RJ45 or SFP ports
4) Choose 1 port modules for slots C-J which can include RJ45, fiber, or SFP ports
5) Choose any optional extras
The configuration is flexible with 10 modular slots and options for up to 4Gb ports and 32 fiber or copper ports.
The document provides configuration instructions for a Magnum 10KT managed switch. It consists of 5 steps:
1) Choose the chassis and power input type
2) If using hot-swappable power supplies, choose the power supply modules
3) Choose modules for gigabit slots A and/or B which may include timing and RJ45 or SFP ports
4) Choose 1 port modules for slots C-J which can include RJ45, fiber, or SFP ports
5) Choose any optional extras
The configuration is flexible with 10 modular slots and options for up to 4Gb ports and 32 fiber or copper ports.
Slot A Slot C Slot E Slot G Slot I configurable hardened managed switch. Provides 10 modular slots for configuration Slot B Slot D Slot F Slot H Slot J flexibility of up to 4 Gb ports and 32 fiber or copper ports. Opt. dual hot-swap pwr supplies. Step 4. Choose 1 port module for up to Step 1. Choose 10KT chassis and power input type 8 slots (C – J) (some may be blank) Model # Description, Base Unit of Magnum 10KT Managed Switch Configure timing in slots C – J in pairs only i.e. C, D 10KT-HSPHH-TF Front mount with 2 “H”(90-250V AC/DC)Hot Swap power slots Step 1. Choose 10KT chassis and power input type or E, F etc… For example, if slot C has a timing 10KTR-HSPHH-TF Reverse mount w/ 2 “H”(90-250V AC/DC)Hot Swap power slots module, then slot D must have a timing module or Front mount, incl 2 slots for one “H” (90-250V AC/DC) and one “L” be unpopulated. If slot G has timing, then slot H must 10KT-HSPHL-TF (24/48DC) Hot-Swap Power Supply; thermal fins have timing or be unpopulated. Reverse mount, incl 2 slots for one “H” (90-250V AC/DC) and one 10KTR-HSPHL-TF “L” (24/48DC) Hot-Swap Power Supply; thermal fins Module Model # 1588 10/ 100BASE 100BASE- Timing 100 -FX(MM) FX(SM) 10KT-HSPLL-TF Front mount w/ 2 slots for “L” (24/48DC)Hot-Swap PS; thermal fins 10K4-RJ45 4 10KTR-HSPLL-TF Rev. mount w/ 2 slots for “L” (24/48DC)Hot-Swap PS; thermal fins 10K4T-RJ45 X 4 10KT-H-TF Front mount with AC/DC power (90-250V); thermal fins 10K4P-RJ45 4 (PoE) 10KTR-H-TF Reverse mount with AC/DC power (90-250V); thermal fins 10KT-L-TF Front mount with 24/48VDC power; thermal fins *10K4PX-RJ45 4 (PoE+) 10K4-MLC 4 (LC) 10KTR-L-TF Reverse mount with 24/48VDC power; thermal fins 10K4T-MLC X 4 (LC) 10KT-AC-TF Front mount w/ worldwide AC power (100-240V); thermal fins 10K4-SLC Step 1. 4 (20km LC) 10KTR-AC-TF Reverse mount w/ worldwide AC power (100-240V); thermal fins 10KTP-HSPLL-TF Same as 10KT-HSPLL-TF but supports PoE Choose 10K4T-SLC X 4 (20km LC) 10KT 10K4-SLCL 4 (40km LC) 10KTPR-HSPLL-TF Same as 10KTR-HSPLL-TF but supports PoE chassis 10K4T-SLCL X 4 (40km LC) 10KTP-L-TF Same as 10KT-L-TF but supports PoE and power 10K4-MTRJ 4 (MTRJ) 10KTPR-L-TF Same as 10KTR-L-TF but supports PoE input type 10K4T-MTRJ X 4 (MTRJ) Step 2. If “HSP” base unit with hot swappable power supplies 10K2-MSC 2 (SC) is selected, choose up to two power supply modules. 10K2-MST 2 (ST) *Note, for PoE, every power supply chosen must be -48V 10K2T-MST X 2 (ST) HSPM-H AC or DC power (90-250V) 10K2T-SST X 2 (20km) (ST) 24/48 DC power (22-60V) Note: for PoE at -48VDC: Input HSPM-L 10K2-SSC 2 (20km SC) should be -44 to10/ 1588 -57VDC. 100BASE 100BASE- Module Model # 10K2-SSCL 2 (40km SC) HSPM-HF AC Timing or DC power100 -FX(MM) (90-250V) FX(SM)fan w/internal cooling 10K4-RJ45 10K2-F10ST Module with two multi-mode 10Mb ST ports 24/48 DC power 4(22-60V) w/ internal cooling fan; Note: for HSPM-LF 10K4T-RJ45 PoE atX-48VDC: Input 4 should be -44 to -57VDC. 10K4-FXSFP SFP module w/ 4 100Mb SFP open xcvr slots 10K-PSBLNK 10K4P-RJ45 * Blank cover for one hot-swap power supply slot 4 (PoE) * Configure in 48VDC base units only, up to thirty-two 802.3af PoE ports or sixteen 802.3at PoE+ ports. 10K4-MLC 4 (LC) Step 3 Choose modules for Gb Slots A and/or B (may be blank) 10K4T-MLC 100Mb SFP transceivers Configure timing Xin slots A - B in 4 (LC) pairs only. … 10K4-SLC For example, if slot A has a timing module,4 (20km LC)slot B then SFP100P-FXMM2 100FX fiber SFP transceiver; multi-mode, 2km 1588 10/ 100BASE 100BASE- must have a timing 10K4T-SLC X module or be unpopulated. 4 (20km LC) SFP100P-FXSM20 100FX Module Model # fiber SFP transceiver sgl-mode, 20km Timing 100 -FX(MM) FX(SM) 10K4-SLCL SFP100P-FXSM40 100FX fiber SFP transceiver sgl-mode, 40km Module# Gigabit Modules for Slots A -4B(40km LC) 10K4-RJ45 4 10K4T-SLCL X Gigabit RJ-45 ports, 15884timing (40km LC) SFP100P-RJ45 10/100Mb, RJ45 SFP transceiver 10K2T-2GCU Two 10K4T-RJ45 X 4 Step 3 Choose models for Gigabit 10K4-MTRJ Slots A and/or B 4 (MTRJ) Step 5 (final step)S Choose options & extras: 10K2T-2GSFP (may be blank) Two Gigabit SFP slots, 1588 timing 10K4P-RJ45 * 4 (PoE) 10K4T-MTRJ 10K2-2GCU X Gigabit RJ-45 Two 4 (MTRJ) ports 10K4-MLCDescription 4 (LC) Model # 10K2-MST 10K2-2GSFP 2 (ST) Two Gigabit SFP slots 10K4T-MLC X 4 (LC) Removable Fan for extra fiber ports and cooling; Optional for 10K2-MSC 2 (SC) KT-RFAN 10K4-SLC up to 16 fiber ports. Required for 18 to 36 fiber ports. 4 (20km LC) Gb SFP transceivers 10K2-SSC 2 (20km SC) 10KT-BLNK 10K4T-SLC Blank cover for X 1 unused 10KT port module slot 4 (20km LC) SFP-GTP Gb Copper 10K2-SSCL 2 (40km SC) 10K4-SLCL Console attachment cable serial null Modem cable4with (40km one LC) SFP-SX Gb SX, 850nm wavelength, 550 meters distance CONSOLE-CBLQD Step 2. If “HSP” base unit with hot swappable power supplies RJ-45 for the 10KT and a DB-9 10K4T-SLCL X 4 (40km LC) isSFP-ESX selected,Gbchoose SX, 1310nm up wavelength, to two power2km distance supplies. CONSOLE-CBLQU Console attachment cable serial null Modem cable with one 10K4-MTRJ RJ-45 for the 10KT and a USB 4 (MTRJ) SFP-LX10 *Note, Gb LX,every for PoE, 1310nm wavelength, power supply10kmchosen distance must be -48V 10K4T-MTRJ MNS-6K-SECURE X per switch for extra Optional, licensed 4 (MTRJ) security SFP-LX25 Gb LX, 1310nm wavelength, 25km distance SFP-ZX40 Gb ZX, 1550nm wavelength, 40km distance S-RING-KEY 10K2-MSTSoftware, optional self-healing redundant 2 (ST) ring management 10K2-MSC 2 (SC) CONFORM05-RMOD Conformal coating, 5 mil, for moisture protection SFP-ZX70 Gb ZX, 1550nm wavelength, 70km distance 10K2-SSC 2 (20km SC) CONFORM08-RMOD Conformal coating, 8 mil, for corrosive environments 10K2-SSCL 2 (40km SC)