Professional Documents
Culture Documents
cfs0018 UK R1 Menvier-Product-Catalogue PDF
cfs0018 UK R1 Menvier-Product-Catalogue PDF
ONE COOPER
Every day, thousands of people all over the world use products made by Cooper
Industries. As a premier global manufacturing company, we believe that great brands are
built on high quality and excellent service. Which is why our brands have earned leading
positions in the markets we serve. Cooper Safety specialises in products designed to save
lives and protect property in commercial, industrial and residential buildings. It’s just one
of the seven divisions that continue to uphold our reputation through unparalleled sales
2
Conventional Intelligent Addressable Ancillaries and Test Equipment
5 Conventional Contents 47 Intelligent Addressable Contents 103 Heavy Duty Relay Unit
7 Fire Panels 49 Fire Panels 105 Power Supply Unit
15 Detectors 61 Repeater Panels 107 Loop Tester Kit
17 Standard Base 65 Sensors 108 Addressable Device Programmer
19 Relay Base 67 Standard Base
21 Remote Indicator 69 Sounder Base
23 Reflective Beam Detectors 71 Sounder Beacon Base
25 Callpoints 73 Loop Connected Remote Indicator
27 Bells 75 Reflective Beam Detectors
29 Flush Sounders 77 Callpoints
31 Sounder and Sounder Beacon 79 Wall Sounders
33 Surface Sounders 81 Wall Sounder Beacons
37 Xenon Beacons 83 LED Beacons
41 LED Beacons 85 Interfaces
45 Door Retainers 97 Micro Interfaces
3
About us
AT
PREVEN
LPCB
ION BO
A
S
R
LO D
Cooper Fire offers a comprehensive range integrated fire detection and alarm system.
of Menvier fire detection products suitable
for a wide range of projects, from a small It is absolutely vital that all the elements of
simple installation to a large complex multi a fire detection system are fully compatible
building site. with each other. To support this
philosophy, a large multi-disciplined
Cooper Fire manufacture a wide range of research and development team is based
products and offers complete fire in the UK at the Cooper Doncaster facility,
solutions, not just individual components. responsible for the integration of the very
A complete system can be specified from latest technology into the design of our
a single source, confident in the comprehensive range of fire products.
knowledge that all the components have
been specifically designed and tested to
4
Conventional Product Range
Conventional Contents
Page 7 Page 31
Control Panels Sounder
MF9300 and Sounder Beacon
MDS824 and MDS824B
Page 11 Page 33
Control Panels Surface Sounders
MF200 and MF400 MWS424SB and MWS424DB
Page 15 Page 35
Detectors Low Current Sounder
MPD821, MPT951, MFR830 MLC624
MMT860 and MHT890
Page 17 Page 37
Standard Base Xenon Beacons
MDB800 MXB124SB and MXB124DB
Page 19 Page 39
Relay Base Xenon Sounder Beacons
MDB800R MCD524SB and MCD524DB
Page 21 Page 41
Remote Indicator LED Beacons
CIR301 MLB124SB and MLB124DB
Page 23 Page 43
Reflective Beam Detectors LED Sounder Beacon
MBD50R and MBD100R MSB124SB and MSB124DB
Page 25 Page 45
Callpoints Heavy Duty Door Retainers
MBG914 and MBG917 MDR240 and MDR25L
Page 27
Bells
MBM246. MBM248 and
MWB824
Page 29
Flush Sounders
MFS324 and MFS324W
5
Conventional System Architecture
The philosophy of a conventional system revolves This increases installation complexity by forcing the
around dividing the building into a number of areas sounder wiring to follow different routes to that of the
called zones. The detectors and callpoints within detector wiring.
each zone are then wired on dedicated circuits. In the
event of a detector or callpoint being triggered, When designing a conventional system it is important
the panel is able to identify which circuit contains the to ensure that the panel has adequate zone capacity
triggered device and thereby indicate which zone the for the size and complexity of the building and that
fire alarm has come from. the panel can support the intended sounder circuit
wiring and loading.
It is then necessary to manually search the indicated
zone to pinpoint the exact cause of the fire alarm.
Zone 1 Zone 2
Unwanted Alarms
Because most conventional detectors are simple two
state devices they can only be in either a normal or
fire condition. Although modern components and
good system design can go some way to reducing
potential problems, it is not uncommon for
conventional systems to generate unwanted alarms
due to certain operating conditions or transient
environmental conditions such as the presence of
steam near to a smoke detector.
Sounder Circuits
In addition to the detection circuits, there is also a
need for separate circuits of alarm annunciation
devices such as sounders and beacons to signal the
existence of a fire alarm condition to the building
users. For sounder circuit continuity monitoring to
function effectively, sounder circuits have to be wired
in a single radial circuit, spurs and tees are not
permitted. Zone 3 Zone 4
6
Conventional Product Range
Overview Features
The Menvier MF9300 is a range of high specification • 2, 4, 8 or 16 zone panels
conventional control panels designed for a wide • Matching repeaters available
for 4, 8 and 16 zone panels
range of building types and sizes at a competitive
• Coincidence detection and
price. non-latching zone features on
4, 8 and 16 zone panels
Available in a choice of 2, 4, 8 or 16 zone versions, the • Surface or flush mounting
MFR9300 repeater panel MF9300 range is designed for ease of installation and option as standard
simple operation. • Up to 32 detectors per zone
• 72 hour standby as standard
All panels can be either surface or flush mounted, • 24 hour standby available
without the need of additional bezels or back boxes.
7
Conventional Control Panel - MF9300 Range
Technical Specification
Code MF9302 MF9304 MF9308 MF9316
Description 2 zone control panel 4 zone control panel 8 zone control panel 16 zone control panel
Standards EN54 Pt2 & Pt4 1998 EN54 Pt2 & Pt4 1998 EN54 Pt2 & Pt4 1998 EN54 Pt2 & Pt4 1998
EN50130-4:1996 EN50130-4:1996 EN50130-4:1996 EN50130-4:1996
EN500081-1:1992 & EN61000-2-2:1994 EN500081-1:1992 & EN61000-2-2:1994 EN500081-1:1992 & EN61000-2-2:1994 EN500081-1:1992 & EN61000-2-2:1994
Specification
Number of Zones 2 4 8 16
Detectors per Zone 32 32 32 32
Number of Alarm Circuits 2 2 4 4
Alarm Circuit Load 500mA per circuit. 1A total 500mA per circuit. 1A total 500mA per circuit. 2A total 500mA per circuit. 2A total
End of Line Devices Detection circuits: 12KΩ resistor Detection circuits: 12KΩ resistor Detection circuits: 12KΩ resistor Detection circuits: 12KΩ resistor
Alarm lines: 12KΩ resistor Alarm lines: 12KΩ resistor Alarm lines: 12KΩ resistor Alarm lines: 12KΩ resistor
Auxiliary Fire Signal Output 1A 24V dc (resistive) single pole 1A 2 4V dc (resistive) single pole 1A 24V dc (resistive) single pole 1A 24V dc (resistive) single pole
changeover contacts. Isolate facility available changeover contacts. Isolate facility available changeover contacts. Isolate facility available changeover contacts. Isolate facility available
Auxiliary Fault Output N/A 1A 2 4V dc (resistive) single pole 1A 24V dc (resistive) single pole 1A 24V dc (resistive) single pole
changeover contacts changeover contacts changeover contacts
Auxiliary Common Output 24V dc pull to 0V. Max 10mA 24V dc pull to 0V. Max 10mA 24V dc pull to 0V. Max 10mA 24V dc pull to 0V. Max 10mA
Auxiliary dc Output 24V dc fused. 100mA 24V dc fused. 100mA 24V dc fused. 350mA 24V dc fused. 350mA
Repeater output N/A 2 wire serial link 2 wire serial link 2 wire serial link
(repeater also requires separate 230V ac supply) (repeater also requires separate 230V ac supply) (repeater also requires separate 230V ac supply)
Mains Input Voltage 230V ac ±10%. 50/60Hz 230V ac ±10%. 50/60Hz 230V ac ±10%. 50/60Hz 230V ac ±10%. 50/60Hz
System Operating Voltage 24V dc 24V dc 24V dc 24V dc
Standby Duration 72 hours 72 hours 72 hours (24 hours option) 72 hours (24 hours option)
Battery 2 x 7Ah sealed lead acid battery 2 x 7Ah sealed lead acid battery 2 x 12Ah sealed lead acid battery 2 x 12Ah sealed lead acid battery
Recharge Period 24 hours 24 hours 24 hours 24 hours
Environmental
Operating Temperature -5°C to +40°C -5°C to +40°C -5°C to +40°C -5°C to +40°C
Humidity (Non Condensing) 0 to 75% RH 0 to 75% RH 0 to 75% RH 0 to 75% RH
Physical
Construction ABS/Polycarbonate housing & back box ABS/Polycarbonate housing & back box ABS/Polycarbonate housing & steel back box ABS/Polycarbonate housing & steel back box
Dimensions (H x W x D) 344mm x 395mm x 95mm 344mm x 395mm x 114mm 386mm x 395mm x 114mm 386mm x 395mm x 114mm
Weight 10.6kg 10.6kg 16.8kg (24 hours option 16.0kg) 16.9kg (24 hours option 16.0kg)
Ingress Protection IP20 IP20 IP20 IP20
Cable entries Top: 13 x 20mm knockouts Top: 13 x 20mm knockouts Top: 27 x 20mm knockouts Top: 27 x 20mm knockouts
Back: 1 x 20mm knockout Back: 1 x 20mm knockout Back: 1 x 20mm knockout Back: 1 x 20mm knockout
Note: If a repeater panel is required to operate Dimensions Description H (mm) W (mm) D1 (mm) D2 (mm)
with the MF9304, use the MFR9308, 8 zone MF9302 344 395 25 70
repeater. D1 MF9304 344 395 25 70
W
D2 MF9308 386 395 25 119
MF9316 386 395 25 119
MFR9308 386 395 25 119
MFR9316 386 395 25 119
H
Description Cut-out (mm)
MF9302 324 x 385
MF9304 324 x 385
MF9308 376 x 385
MF9316 376 x 385
Note: If surface mounting add D1 and D2 to obtain
depth dimension.
Product Codes
Code Description
MF9302 Conventional 2 zone control panel
MF9304 Conventional 4 zone control panel
MF9308 Conventional 8 zone control panel
MF9316 Conventional 16 zone control panel
MF9308L Conventional 8 zone control panel (24 hour standby)
MF9316L Conventional 16 zone control panel (24 hour standby)
MFR9308 Conventional 8 zone repeater panel
MFR9316 Conventional 16 zone repeater panel
MFALOG Fire alarm system log book
8
Conventional Control Panel - MF9300 Range
9
Conventional Control Panel - MF9300 Range
END OF LINE
12K RESISTOR TO DOOR RELEASE UNITS
MDB800 NC NC
DETECTOR MAR724 -
BASE HEAVY 24V dc 10mA COIL
DUTY
END OF LINE RELAY +
12K RESISTOR
C C
TO REPEATER PANEL
- VE + VE
REQUIRING RELAY
TO APPLICATIONS
IN & OUT IN & OUT 230V ac +/- 10% 50/60Hz
ON 2 ON 1
TO VOLT FREE
+
CONTACTS
(NOTE 3)
MBG914/917
FAULT
CALLPOINT
connect as per (NOTE 1) +
instructions
subsequent alarm lines
subsequent zones
- + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + NC C NO NC C NO - + - +
EARTH
FAULT REMOTE
RELAY SIGNAL
RELAY
NOTES:
1. All sounders must be polarised and suppressed.
2. Connection details for door release units when required.
3. Connection details for repeater panels when required.
10
Conventional Product Range
Overview Features
The Menvier MF200 and MF400 range of • 2 or 4 zone panels
conventional control panels offer a competitive • Competitively priced
• Supplied complete with battery
solution for smaller installations.
and end of line devices
11
Conventional Control Panels - MF200 and MF400
Technical Specification
Code MF200 MF400
Description 2 zone control panel 4 zone control panel
Standards EN54 Pt2 & Pt4 1998, EN50130 Pt4 1996 EN54 Pt2 & Pt4 1998, EN50130 Pt4 1996
Specification
Number of Zones 2 4
Detectors per Zone 20 20
Number of Alarm Lines 2 2
Alarm Circuit Load 375mA per circuit. 750mA total 375mA per circuit. 750mA total
End of Line Devices Detection circuits: 22KΩ resistor Detection circuits: 22KΩ resistor
Alarm lines: 22KΩ resistor Alarm lines: 22KΩ resistor
Auxiliary Fire Signal Output 24V dc pull to 0V. Max 10mA 24V dc pull to 0V. Max 10mA
Auxiliary Fault Output 24V dc pull to 0V. Max 10mA 24V dc pull to 0V. Max 10mA
Auxiliary dc Output 24V dc fused. 32mA 24V dc fused. 32mA
(up to 100mA at the expense of alarm load) (up to 100mA at the expense of alarm load)
Mains Input Voltage 240V ac +10%-15% 240V ac +10%-15%
System Operating Voltage 24V dc 24V dc
Standby Duration 24 hours 24 hours (72 hours on MF400-72)
Battery 1 x 4Ah sealed lead acid battery 1 x 4Ah sealed lead acid battery
(1 x 7Ah on MF400-72)
Recharge Period 48 hours (80% in 24 hours) 48 hours (80% in 24 hours)
Environmental
Operating Temperature -5°C to +40°C -5°C to +40°C
Humidity (Non Condensing) 0 to 75% RH 0 to 75% RH
Physical
Construction ABS/Polycarbonate housing. Steel back box. ABS/Polycarbonate housing. Steel back box.
Dimensions (H x W x D) 300mm x 300mm x 74mm 300mm x 300mm x 74mm
Weight 4.8kg 4.8kg (6.0kg on MF400-72)
Ingress Protection IP30 IP30
Cable entries Top: 10 x 20mm conduit entries Top: 10 x 20mm conduit entries
Bottom: 1 x 20mm conduit entry (mains cable) Bottom: 1 x 20mm conduit entry (mains cable)
Back: 1 x mains cable entry slot Back: 1 x mains cable entry slot
Dimensions
D W
H (mm) W (mm) D (mm)
300 300 74
Product Codes
Code Description
MF200 Conventional 2 zone control panel
MF400 Conventional 4 zone control panel
MF400-72 Conventional 4 zone control panel (72 hour standby)
MAR424 Conventional fire and fault relay PCB
MFALOG Fire alarm system log book
12
Conventional Control Panels - MF200 and MF400
13
Conventional Control Panels - MF200 and MF400
SWITCH /CONTACTOR/TIMER
24V dc 10mA DOOR RELEASE UNITS
END OF LINE PULL TO 0V RELAY OUTPUTS
22KOhm RESISTOR 240V dc 10A
(APPLY NO VOLTAGE)
MDB800
NC C NO NO C NC
DETECTOR
MAR724
BASE
FIRE SIGNAL
+ -
ISOLATING
SIGNAL
FAULT
10mA
END OF LINE COIL
22KOhm RESISTOR
+ VE - VE + - E + - E
IN & OUT IN & OUT AUX FAULT / AUX FAULT /
MAR724 REMOTE SIGNAL REMOTE SIGNAL
ON 1 ON 2
MAR424
24V 10mA
AUX RELAY OUTPUTS REMOTE
FAULT 24V 1A (resistive) SIGNAL
MBG914/917
CALLPOINT
C NC NO E E C NC NO
connect as per
instuctions subsequent subsequent MAR424
zones alarm lines + - E + -
24V 24V
10mA 10mA
COIL COIL
+ - E + - E + - E + - E + - E + - E + - E + - E + - E + - E + - E + - E
ZONE ZONE ZONE ZONE ALARM ALARM AUX REM CLASS AUX AUX REMOTE
1 2 3* 4* 1 2 FAULT SIG CHANGE DC FAULT SIGNAL
* MF400 ONLY
C = COMMON
NC = NOT NORMALLY CONNECTED
NO = NORMALLY OPEN
14
Conventional Product Range
Detectors
Overview Features
The Menvier range of conventional detectors • Quick and simple to install
have been specifically designed to operate with • Stylish low profile design
• 360º viewable LED
Menvier control panels.
• Removable detector chamber
• Drift compensation
The Menvier optical detector MPD821 is suitable for
most applications giving the fastest response to slow
burning or smouldering fires which give rise to large Benefits
visible smoke particles.
• ‘Clean me’ feature means
The Menvier photo-thermal detector MPT951 will detector can be cleaned on
innovative light pipe technology allows LED to be site using the Menvier manual
seen from any angle respond quickly to fast clean burning fires yet
maintain the advantage of optical detectors when cleaning procedure
detecting smouldering fires. The thermal • Common mounting base
enhancement of this detector allows a higher alarm • Positive ‘lock’ indication
threshold which provides a greater rejection of false
alarms. The detector will also raise an alarm at
temperatures exceeding 60ºC.
15
Conventional Detectors
Technical Specification
Code MPD821 MPT951 MFR830 MMT860 MHT890
Description Optical smoke Detector Photo-thermal detector Rate of rise detector Fixed heat detector (77ºC) Fixed heat detector (92ºC)
Standards EN54 Pt7 2000, A1 2002 EN54 Pt 5 & Pt 7 2000, A1 2002 EN54 Pt 5 2000, A1 2002 EN54 Pt 5 2000, A1 2002 EN54 Pt 5 2000, A1 2002
Supply Ratings
Operating Voltage 15V dc to 30V dc 15V dc to 30V dc 15V dc to 30V dc 15V dc to 30V dc 15V dc to 30V dc
Standby Current 30µA (max) 30μA (max) 30μA (max) 30μA (max) 30μA (max)
Startup Current 340µA (max) 340μA (max) N/A N/A N/A
Alarm Current 25mA (max) 25mA (max) 25mA (max) 25mA (max) 25mA (max)
Fixing Information
Mounting Position Ceiling in open areas Ceiling in open areas Ceiling in open areas Ceiling in open areas Ceiling in open areas
Mounting Options Surface mount with MDB800 base Surface mount with MDB800 base Surface mount with MDB800 base Surface mount with MDB800 base Surface mount with MDB800 base
Area Coverage 100m² (subject to local standards) 100m² (subject to local standards) 50m² (subject to local standards) 50m² (subject to local standards) 50m² (subject to local standards)
System Wiring 2 Core 2 Core 2 Core 2 Core 2 Core
Operation
Detection Mode Light scatter principle Light scatter principle & Heat sensitive element Heat sensitive element Heat sensitive element
Heat sensitive element
Heat Class N/A A2S A2R BS CS
Alarm Temperature N/A 60ºC 60ºC 77ºC 92ºC
Indication 360º visible LED 360º visible LED 360º visible LED 360º visible LED 360º visible LED
Environmental
Operating Temperature -20ºC to 60ºC -20ºC to 45ºC -20ºC to 45ºC -20ºC to 60ºC -20ºC to 75ºC
Humidity (Non Condensing) 0 to 93% RH 0 to 93% RH 0 to 93% RH 0 to 93% RH 0 to 93% RH
Physical
Construction PC/ABS PC/ABS PC/ABS PC/ABS PC/ABS
Colour White White White White White
Dimensions Excl Base (Dia x H) 101mm x 33mm 101mm x 43mm 100mm x 43mm 101mm x 43mm 101mm x 43mm
Dimensions Incl Base (Dia x H) 101mm x 45mm 101mm x 55mm 100mm x 55mm 101mm x 55mm 101mm x 55mm
Ingress Protection IP40 IP40 IP40 IP40 IP40
EMC CE Marked CE Marked CE Marked CE Marked CE Marked
Compatibility
Suitable for use with Menvier conventional fire systems Menvier conventional fire systems Menvier conventional fire systems Menvier conventional fire systems Menvier conventional fire systems
Product Codes
Code Description
MPD821 Conventional optical smoke detector
MPT951 Conventional photo-thermal detector
MFR830 Conventional rate of rise heat detector
MMT860 Conventional fixed heat detector (77°C)
MHT890 Conventional fixed heat detector (92°C)
MDB800 Conventional detector base
MDP201 Duct Probe
16
Conventional Product Range
Overview Features
MPT951 photo-thermal detector • Quick and simple to install
The MDB800 Menvier conventional base has been
specifically designed to be compatible with the • Separate zone in and zone out
terminals
Menvier range of conventional detectors.
• Stand off fixing feature
• Selectable detector locking
This standard base has been designed for flexibility,
simplicity and speed of installation.
Benefits
It incorporates purpose designed devices to provide
fault warning if detector is removed whilst • Accepts side entry surface
maintaining full zone wiring integrity. cables
• Common base for Menvier
The base has a spring contact switch and a parallel conventional detectors
zener diode to enable fault monitoring.
17
Conventional Standard Base - MDB800
Standard Connection
+ VE
+
remote indicator (optional)
Menvier Conventional
+ 1 LED
1 LED
4
Compatible
4
ZONE
2 E 2 E
- 3 3
- VE
WARNING:
If using the outer connection on terminal 2, ensure the operation of the switch is not impeded
and that there are no shorts between terminal 2 and the switch contact - use sleeves for end
of line resistor. Ensure that cable or end of line resistor leg does not short onto the contact.
Product Codes
Code Description
MDB800 Conventional standard base
MDB800*10 Conventional standard base (pack of 10)
CIR301 Conventional remote indicator
18
Conventional Product Range
Overview Features
MPT951 photo-thermal detector • Quick and simple to install
The MDB800R Menvier conventional relay base has
been specifically designed to be compatible with • Designed specifically for use
with Menvier detectors
the Menvier range of conventional detectors.
• Provides remote signal for
external interfacing
This relay base as been designed for flexibility,
simplicity and speed of installation.
Benefits
It provides a local relay signal in the event of its host
detector being triggered, making it ideal for • First fix mounting plate for
instigating a local response. ease of installation
• Local control output from host
detector
19
Conventional Relay Base - MDB800R
System Functionality
1. Relay is controlled by status of host detector.
2. If host detector is triggered relay activates.
Standard Connection
+ VE
+
remote indicator (optional)
+
Menvier Conventional
LED
1 LED
1
4 4
Compatible
ZONE
2 E 2 E
- 3 3
- VE
WARNING:
If using the outer connection on terminal 2, ensure the operation of the switch is not impeded
and that there are no shorts between terminal 2 and the switch contact - use sleeves for end
of line resistor. Ensure that cable or end of line resistor leg does not short onto the contact.
Product Codes
Code Description
MDB800R Conventional relay base
20
Conventional Product Range
Overview Features
The CIR301 conventional remote indicator is • Quick and simple to install
designed to provide discreet remote indication for • Wide viewing angle high
brightness LED
use with Menvier conventional detectors.
• Attractive styling
21
Conventional Remote Indicator - CIR301
+ 1 LED
place. 4. Low current consumption.
Control Panel
Compatible
4
ZONE
2 E
- 3
- VE
IN
+ -
DETECTOR
BASE
Compatible
Menvier Conventional
Control Panel
WARNING:
Do NOT use high voltage testers if ANY equipment is
connected to the system.
Product Codes
Code Description
CIR301 Conventional remote indicator
M1R195B Conventional remote indicator (with buzzer)
22
Conventional Product Range
Overview Features
The Menvier range of zone powered reflective beam • Quick and simple to install
detectors are specifically designed to be compatible • Simple two wire connection
• No power supply required
with the full range of conventional Menvier control
panels.
Benefits
Two versions are available, the MBD50R with a range
of up to 50 metres, and the MBD100R with a range of • Single device to install instead
combined transmitter and receiver for ease of of numerous point detectors
installation 50 - 100 metres.
• Single point of maintenance
Both of these units are extremely simple to install, they • Wall mounted for ease of
require no separate power supply, operate on a maintenance
reflective principle and have a simple set up mode to
enable easy and quick alignment during installation.
23
Conventional Reflective Beam Detector - MBD50R and MBD100R
210 130 120 Description Reflective beam detector Reflective beam detector
Standards EN54 Pt 12 2002 EN54 Pt 12 2002
Specification
H D
Operating Voltage 18V dc to 30V dc 18V dc to 30V dc
Quiescent Current <5mA (no LED’s illuminated) <5mA (no LED’s illuminated)
Alarm Current <9mA <9mA
Alignment Current <18mA <18mA
Compatible
box (not supplied) or use purpose designed
IN
Menvier Conventional
Control Panel EOL
the need for additional
mounting bracket (MRBFP) ordered separately. calibration equipment or a
DEVICE
5. Mounting bracket has facilities for glanding of second operator.
incoming cables plus simple fixing of beam
• Normal running mode
WARNING: detector.
Do NOT use high voltage testers if ANY equipment is 6. Test filter is supplied with detector to simulate
connected to the system. required smoke obscuration level and confirm User Interface
correct operation.
Screen (Earth) must be continuous along entire length of zone.
1. Beam detector status LEDs
• Red LED
constantly illuminated
indicates fire condition.
• Flashing amber LED
indicates fault condition.
Interface Options
1. Conventional beam detectors
are connected directly to the
Menvier conventional panel.
Product Codes
Code Description
MBD50R Conventional reflective beam detector, 50m range
MBD100R Conventional reflective beam detector, 100m range
MRBFP Mounting bracket
24
Conventional Product Range
MBG914 callpoint
Overview Features
This attractively designed, simple to install, range of • High visibility status LED
callpoints have been specifically developed to be • Standard and weatherproof
versions available
compatible with Menvier conventional fire panels.
• Wide range of accessories
• Heavy duty terminals
There are 2 versions of callpoint in this range. The
MBG914 which can be either surface or flush
MBGHCC protective hinged cover
mounted and the MBG917 which is a weatherproof Benefits
version.
• Quick and simple to install
All callpoints are supplied as standard with a • Fast fit clip on front cover
frangible glass element and a test key for ease of • Single tool for test and access
maintenance.
25
Conventional Callpoints - MBG914 and MBG917
Description H (mm) W (mm) D (mm) Dimensions (H x W x D) 87mm x 87mm x 57mm (36mm flush) 87mm x 87mm x 59mm
Weight 0.2kg 0.2kg
Flush mounted 87 87 36
Ingress Protection IP42 IP65
Surface mounted 87 87 57
Compatibility
Weatherproof 87 87 59
Suitable for use with Menvier conventional fire systems Menvier conventional fire systems
bottom surface entry cables. Surface callpoint can • Hinged clear cover
also be flush mounted. • Resettable plastic element
470Ω
4V7
2. Callpoint has test facility via special test key to • Replacement test key
prevent unauthorised operation. • Replacement glass elements
+ + - - - - 3. Insertion of test key for test purposes and for cover • Earth continuity links
removal is at bottom of callpoint to facilitate ease
Compatible of access when mounted next to door architrave.
Menvier Conventional
Control Panel 4. Test key is dual function, used to test callpoint
operation by simulating activation and also to allow
removal of clip on cover to gain access to element.
WARNING: 5. Element is held in place by clip on self locking
Do NOT use high voltage testers if ANY equipment is
cover which can only be removed by use of a
connected to the system.
special tool (callpoint test key).
Screen (Earth) must be continuous along entire length of cable 6. Separate zone in and zone out terminals are
provided for all connections.
NOTE: 7. Surface/flush callpoints are IP42, weatherproof is
470Ω connection is for standard Menvier conventional panels. IP65.
4V7 connection can be used with MF9300 to enable certain
features on the Menvier MF9300 range of control panels.
User Interface
1. To enable quick and simple installation, callpoints
use a fast fit self locking clip on front cover which
is very simple to fit, but once in place, can only
be removed by use of a special key (supplied).
2. Callpoint is triggered by pressing against the
element.
Product Codes
Code Description
MBG914 Conventional surface/flush callpoint
MBG917 Conventional weatherproof callpoint
MBGHCC Protective hinged cover
MBGSP Spacer plates (pack of 10)
MBGBEZ Recessing bezels (pack of 10)
MBGREKIT Resettable element kit (pack of 10)
MBG118 Spare break glasses (pack of 5)
MBG119 Earth continuity links (pack of 5)
MFBGKEY3 Callpoint keys (pack of 10)
26
Conventional Product Range
Overview Features
Bells still remain a popular choice for many • Quick and simple to install
applications such as schools where they can • High sound output
• Low current consumption
sometimes be used as a signal for non fire
• Multi-fixing base plate (internal)
purposes such as class change. • IP42 rated (internal)
• IP54 rated (weatherproof)
MBM246 and MBM248
The MBM246 and MBM248 Menvier internal bells
incorporate highly efficient rotary centrifugal Benefits
movements combining high sound output with low • Can be used for non fire
current consumption. applications
MWB824
The MWB824 Menvier weatherproof bell enables a
common bell sound to be achieved throughout a
complete site, including areas where a weatherproof
device is required.
27
Conventional Bells - MBM246, MBM248 and MWB824
Product Codes
Code Description
MBM246 Conventional internal 6 Inch bell
MBM248 Conventional internal 8 Inch bell
MWB824 Conventional weatherproof 8 Inch bell
28
Conventional Product Range
Overview Features
The Menvier discreet flush sounder is designed to • Choice of colours
be compatible with Menvier conventional fire • Separate volume control
• Choice of tone is determined
systems. Available in a choice of colours MFS324
by selection of appropriate
red and MFS324W white. terminal for negative
connection
These flush sounders provide an excellent
combination of high sound output and discreet
appearance. Ideal for retail, hotel and residential Benefits
applications such as sheltered housing.
• Quick and simple to install
• Low profile design
29
Conventional Flush Sounder - MFS324 and MFS324W
4. Separate loop in and loop out terminals are conventional sounder circuit.
provided.
5. For surface mount applications a separate red
single gang box can be ordered separately.
+ + - - - -
Compatible
Menvier Conventional
Control Panel
WARNING:
Do NOT use high voltage testers if ANY equipment is
connected to the system.
NOTE:
Diagram shown with 1st sound connected, if 2nd sound is
required connect both negative in and negative out to the
second sound terminal.
Product Codes
Code Description
MFS324 Conventional flush sounder, red
MFS324W Conventional flush sounder, white
MFSSBB Back box, red
30
Conventional Product Range
31
Sounder and Sounder Beacon - MDS824 and MDS824B
COMMON
WARNING:
Do NOT use high voltage testers if ANY equipment is
connected to the system.
NOTE:
Diagram shown with 1st sound connected, if 2nd sound is
required connect both negative in and negative out to the
second sound terminal.
Product Codes
Code Description
MDS824 Conventional sounder
MDS824B Conventional sounder beacon
MDS824COV Blanking plate (pack of 5)
32
Conventional Product Range
Overview Features
These general purpose conventional surface MWS424SB
sounders have been specifically designed to work • Low profile design
with Menvier conventional control panels. • Pre drilled cable entries
• 32 selectable tones
MWS424SB
The MWS424SB is a low profile surface sounder. MWS424DB
• Weatherproof version (IP65)
Volume is adjustable via the internal volume control • Choice of cable entry positions
and 32 different alarm tone selections are provided. • 32 selectable tones
low profile base
Depending on the selected tone, sound levels of up Benefits
to 105dB(A) can be achieved.
• Low current, high sound
MWS424DB output
The MWS424DB is a weatherproof (IP65) surface • Suitable for a wide range of
sounder. applications
• Automatic synchronisation
Volume is adjustable via the internal volume control
and 32 different alarm tone selections are provided.
weatherproof base
33
Conventional Surface Sounders - MWS424SB and MWS424DB
Dia Environmental
Dia
2. Fixing and cable entry holes are pre-drilled. to any suitably rated
3. Cable entry is from rear. conventional sounder circuit.
4. Connections are to main sounder body.
5. Separate zone in and zone out terminals are
+ + - - - - provided. Options
Compatible
6. Main body is pushed into sounder base and then
MWS424SB / MWS424DB
Menvier Conventional twisted to lock into place.
Control Panel 1. Choice of tone setting (set via
DIP switches can be altered at
MWS424DB any time).
WARNING: 1. Supplied with simple to install first fix mounting
Do NOT use high voltage testers if ANY equipment is base.
connected to the system. 2. To maintain weatherproof integrity, fixing holes are
drilled upon installation.
Screen (Earth) must be continuous along entire length of cable
3. Cable entry can be rear or side.
NOTE: 4. Connections are to main sounder body.
Diagram shown with 1st sound connected, if 2nd sound is 5. Separate zone in and zone out terminals are
required connect both negative in and negative out to the provided.
second sound terminal. 6. Main sounder body is pushed into mounting base
and twisted to lock.
Product Codes
Code Description
MWS424SB Conventional low profile surface sounder
MWS424DB Conventional weatherproof surface sounder
34
Conventional Product Range
Overview Features
The MLC624 Menvier low current sounder has been • Quick and simple to install
designed to provide a high sound output with a low • Low current consumption
• High efficiency design
current consumption.
• 3 different tones
• Separate volume control
It is ideal for applications where high sound levels
need to be achieved but where available sounder
circuit capacity is limited. Benefits
The low current sounder is simple to install and uses • Low current, high sound
a first fix back plate onto which the main body output
attaches with a self locking press fix assembly. • Automatic synchronisation
• Self locking assembly
35
Conventional Low Current - MLC624
4. Separate alarm line in / out terminals are provided. conventional sounder circuit.
+ + - - - -
Compatible
Menvier Conventional
Control Panel
WARNING:
Do NOT use high voltage testers if ANY equipment is
connected to the system.
NOTE:
Diagram shown with 1st sound connected, if 2nd sound is
required connect both negative in and negative out to the
second sound terminal.
Product Codes
Code Description
MLC624 Conventional low current sounder
36
Conventional Product Range
Overview Features
MXB124SB
This range of Menvier xenon beacons is available to • Unobtrusive low profile design
complement purely audible alarms for use in areas • High output xenon beacon
either where people may be present who have • Pre drilled cable entries
impaired hearing or areas with high ambient noise entry holes
levels.
MXB124DB
Xenon beacons have a high light output to maximise • Weatherproof version (IP65)
the attention attracting potential of the device. • High output xenon beacon
• Choice of cable entry positions
low profile base MXB124SB
The MXB124SB low profile xenon beacon features a Benefits
high performance light source. Pre-drilled fixing and
cable entry holes it is simple to install. • first fix base
• Compatible with range of
MXB124DB Menvier fire detection panels
The MXB124DB weatherproof xenon beacon is • Weatherproof version
IP65 rated and supports side entry surface cables
making it ideal for industrial applications.
weatherproof base
37
Conventional Xenon Beacons - MXB124SB and MXB124DB
Product Codes
Code Description
MXB124SB Conventional low profile xenon beacon, 1 Watt
MXB124DB Conventional weatherproof xenon beacon, 1 Watt
MXB224SB Conventional low profile xenon beacon, 2 Watt
MXB224DB Conventional weatherproof xenon beacon, 2 Watt
38
Conventional Product Range
MCD524DB weatherproof xenon sounder beacon MCD524SB low profile xenon sounder beacon
Overview Features
This range of Menvier xenon sounder beacons is MCD524SB
available to complement purely audible alarms for • Unobtrusive low profile design
use in areas either where people may be present • High output xenon beacon
• Pre drilled cable entries
who have impaired hearing or areas with high
• Sounder and beacon with a
ambient noise levels. single installation point
• 32 selectable tones
The key benefit of these devices is that an audible
and a visual alarm are combined together and require
MCD524DB
only a single installation point. This greatly reduces
• Weatherproof version (IP65)
low profile base installation time and cost and is much less obtrusive
• High output xenon beacon
than 2 separate devices. Xenon beacons have a high
• Side entry surface cables
light output to maximise the attention attracting
• Sounder and beacon with a
potential of the device.
single installation point
• 32 selectable tones
MCD524SB
The MCD524SB low profile xenon sounder beacon
features a high performance light source and Benefits
adjustable volume control. Due to predrilled fixing
and cable entry holes it is simple to install. • Combined audio / visual unit
• Single installation point
MCD524DB
The MCD524DB weatherproof xenon sounder
beacon is IP65 rated and features a high performance
light source and adjustable volume control.
weatherproof base Lower power LED variants are also available which
offer a lower current consumption but have a
consequently lower light output than traditional xenon
types (MSB124SB and MSB124DB LED sounder
beacons).
39
Conventional Xenon Sounder Beacons - MCD524SB and MCD524DB
Dia
Sound Output 101dB(a) max (+/-3) at 24V dc 101dB(a) max (+/-3) at 24V dc
Dia
Number of Tones 32 32
Low profile Weatherproof Environmental
xenon sounder beacon xenon sounder beacon Operating Temperature -20°C to +55°C -20°C to +55°C
Humidity (Non Condensing) 0 to 93% RH 0 to 93% RH
Physical
Description Dia (mm) D (mm) Construction PC/ABS PC/ABS
Low profile Colour Red Red
xenon sounder beacon 93 92 Lens Colour Red Red
COMMON
2. Fixing and cable entry holes are pre-drilled. to any suitably rated
3. Cable entry is from rear. conventional sounder circuit.
4. Connections are to main beacon body.
5. Separate alarm line in / out terminals are
- - - - + + provided.
Compatible
6. Main body is pushed into sounder base and then
Menvier Conventional twisted to lock into place.
Control Panel
7. Supply is common for sounder and beacon
WARNING: MCD524DB
Do NOT use high voltage testers if ANY equipment is 1. Cable entry is from rear or side.
connected to the system. 2. Connections are to main beacon body.
3. Separate alarm line in / out terminals are
Screen (Earth) must be continuous along entire length of cable
provided.
NOTE: 4. Main body is pushed into sounder base and then
Diagram shown with 1st sound connected, if 2nd sound is twisted to lock into place.
required connect both negative in and negative out to the 5. Supply is common for sounder and beacon
second sound terminal.
Product Codes
Code Description
MCD524SB Conventional low profile xenon sounder beacon
MCD524DB Conventional weatherproof xenon sounder beacon
40
Conventional Product Range
Overview Features
This range of Menvier LED beacons is available to MLB124SB
complement audible alarms for use in areas either • Unobtrusive low profile design
where people may be present who have impaired • Low power consumption LED’s
• Choice of flash frequency
hearing or areas with high ambient noise levels.
• Choice of power settings
• Pre drilled cable entries
LED technology offers a greatly reduced current
consumption compared to xenon types making them
ideal for use with fire panels with restricted sounder MLB124DB
circuit current capacity. • Weatherproof version (IP65)
• Low power consumption LED’s
low profile base • Choice of flash frequency
MLB124SB
• Choice of power settings
The MLB124SB low profile LED beacon is simple to
• Choice of cable entry positions
install, and offers a reduced depth with pre-drilled
fixing and cable entry holes, suitable for both wall or
ceiling mounting. This beacon utilises 18 carefully Benefits
positioned LED's to provide a high intensity output.
Both output intensity and flash frequency is • Low power requirement
selectable using internal DIP switch. • Selectable flash frequency
• Selectable flash intensity
MLB124DB
The MLB124DB weatherproof LED beacon is IP65
rated making them ideal for industrial applications.
This beacon utilises 18 carefully positioned LED's to
provide a high intensity output. Both output intensity
and flash frequency is selectable using internal DIP
weatherproof base switch.
41
Conventional LED Beacons - MLB124SB and MLB124DB
Product Codes
Code Description
MLB124SB Conventional low profile LED beacon
MLB124DB Conventional weatherproof LED beacon
42
Conventional Product Range
MSB124DB weatherproof LED sounder beacon MSB124SB low profile LED sounder beacon
Overview Features
This range of Menvier LED sounder beacons is MSB124SB
available to complement purely audible alarms for • Unobtrusive low profile design
use in areas either where people may be present • Low current LED beacon
• Sounder and beacon with a
who have impaired hearing or areas with high
single installation point
ambient noise levels. • Pre-drilled fixing and cable
entry holes
LED technology offers a greatly reduced current • 32 selectable tones
consumption compared to xenon types making them
ideal for use with fire panels with restricted sounder
MSB124DB
low profile base circuit current capacity.
• Weatherproof version (IP65)
• Low current LED beacon
MSB124SB • Sounder and beacon with a
The MSB124SB low profile LED sounder beacon single installation point
features a low current LED light source and • Choice of cable entry positions
adjustable volume control. Choice of tones can be • 32 selectable tones
selected via the DIP switch. With predrilled fixing and
cable entry holes it is simple to install.
Benefits
MSB124DB
• Low power requirement
The MSB124DB weatherproof LED sounder beacon
• Adjustable sounder volume
is IP65 rated and features a low current LED light
• Selectable tones
source and adjustable volume control.
weatherproof base
43
Conventional LED Sounder Beacon - MSB124SB and MSB124DB
2. Fixing and cable entry holes are pre-drilled. to any suitably rated
3. Cable entry is from rear. conventional sounder circuit.
4. Connections are to main beacon body. .
5. Separate alarm line in / out terminals are
+ + - - - - provided.
Compatible
6. Main body is pushed into sounder base and then
Menvier Conventional twisted to lock into place.
Control Panel
7. Supply is common for sounder and beacon
WARNING: MSB124DB
Do NOT use high voltage testers if ANY equipment is 1. Cable entry is from rear or side.
connected to the system. 2. Connections are to main beacon body.
3. Separate alarm line in / out terminals are
Screen (Earth) must be continuous along entire length of cable
provided.
NOTE: 4. Main body is pushed into base and then twisted to
Diagram shown with 1st sound connected, if 2nd sound is lock into place.
required connect both negative in and negative out to the 5. Supply is common for sounder and beacon
second sound terminal.
Product Codes
Code Description
MSB124SB Conventional low profile LED sounder beacon
MSB124DB Conventional weatherproof LED sounder beacon
44
Conventional Product Range
Overview Features
This range of Menvier heavy duty magnetic door • Heavy duty construction
door strike plate retainers are robust and simple to install, making • Mains and 24V dc version
• Manual release switch
them ideal for a wide range of applications, such as
• Optional floor mounting
nursing homes, hospitals, schools and industrial bracket available
premises.
45
Conventional Heavy Duty Door Retainers - MDR240 and MDR24L
Description H (mm) W (mm) D (mm) Colour White body / black plate White body / black plate
Dimensions (H x W x D) Magnet: 95mm x 95mm 40mm Magnet: 95mm x 95mm 40mm
Magnet 95 95 40
Striker plate: 65mm x 65mm x 48mm Striker plate: 65mm x 65mm x 48mm
Striker Plate 65 65 48
Weight 1.0kg 1.0kg
Ingress Protection IP40 IP40
Compatibility
Suitable for use with Menvier conventional fire systems Menvier conventional fire systems
Product Codes
Code Description
MDR240 Conventional mains powered heavy duty magnetic door retainer
MDR24L Conventional 24V dc heavy duty magnetic door retainer
ZMDRFBB Floor mounting bracket for heavy duty door retainer
46
Intelligent Addressable Product Range
Page 55 Page 79
Control Panels Wall Sounders
DF6000 MAS850LPS and
MAS850LPSWP
Page 61 Page 81
Passive Repeater Panel Wall Sounder Beacons
DF6000PR MASB860 and MASB860WP
Page 63 Page 83
Touch Screen Repeater Panel Loop Connected LED Beacon
DTPR6000 MAB870
Page 65 Page 85
Sensors Interfaces
MAP820, MAOH850 and
MAH830
Page 67 Page 97
Standard Base Micro Interfaces
MAB800
Page 71
Sounder Beacon Base
MASB870
Page 73
Loop Connected
Remote Indicator
MRIAD
Page 75
Reflective Beam Detectors
MAB50R and MAB100R
47
Intelligent Addressable Product Range
This has many advantages, for example very slow Mains Supply
build up of apparent smoke density seen by a sensor
can cause a warning or pre alarm condition to be 12 5
triggered by the alarm panel prior to the situation
becoming serious enough to warrant a full alarm.
48
Intelligent Addressable Product Range
Overview Features
The Menvier DF6100 range is available as a high • Large versatile touch screen
specification 1 or 2 loop intelligent addressable display
• Competitive single or two loop
control panel, offering sophisticated functionality
system
with simple end user operation. • Spur tolerant soft addressing
• Large selection of compatible
The simplicity of operation, powerful cause and effect ancillaries
programming capability, and competitive pricing • Full network capability
make the system suitable for a wide range of small to • Integral battery and power
medium sized projects. supply
• 200 address capacity per loop
DF6100 uses soft addressing to minimise installation • Approved to EN54 Pt13
time and remove the potential for error associated and EN54 Pt2 and Pt4
with manual addressing.
49
Intelligent Addressable Control Panel - DF6100 and DF61002
Technical Specification
Code DF6100 DF61002
Description 1 loop control panel 2 loop control panel
Standards EN54 Pt2 1997 & 2006: A1, EN54 Pt4 1997 & 2002: A1 EN54 Pt2 1997 & 2006: A1, EN54 Pt4 1997 & 2002: A1
EN54 Pt13, EN50130-4 EN54 Pt13, EN50130-4
Specification
Number of Loops 1 2
Addresses per Loop 200 200
Number of Conventional 2 monitored for open and short circuit 2 monitored for open and short circuit
Sounder Circuits (max 1.5A combined) (max 1.5A combined)
Auxiliary Fire Routing
Equipment Output (Monitored) 24V dc 30mA (max) 24V dc 30mA (max)
Auxiliary Fire Protection
Equipment Output (Monitored) 24V dc 30mA (max) 24V dc 30mA (max)
Auxiliary Fault Routing
Equipment Output (Monitored) 12V dc 30mA (max) 12V dc 30mA (max)
System Operating Voltage 24V dc (nom) 24V dc (nom)
Mains Input Supply 230V ac +10% / -15% 230V ac +10% / -15%
Class Change Facility Terminals for connection of external contacts, Terminals for connection of external contacts,
can also be instigated via input interface can also be instigated via input interface
Auxiliary Relay 1 set of changeover contacts 1 set of changeover contacts
operate in event of fire condition operate in event of fire condition
Output Ports RS485, RS232 for connection of repeaters etc RS485, RS232 for connection of repeaters etc
Standby Duration Dependant on loop loading and battery configuration Dependant on loop loading and battery configuration
Battery 2 x 7Ah 2 x 7Ah
Environmental
Operating Temperature -5°C to +40°C -5°C to +40°C
Humidity (Non Condensing) 0 to 75% RH 0 to 75% RH
Physical
Construction Steel back box Steel back box
Dimensions (H x W x D) 375mm x 375mm x 95mm 375mm x 375mm x 95mm
Weight 8kg 8kg
Ingress Protection IP30 IP30
Cable entries Top: cable knockouts (20mm) Back: cable aperture Top: cable knockouts (20mm) Back: cable aperture
System Networking Fully Networkable up to 127 panels Fully Networkable up to 127 panels
(requires additional network card, per panel) (requires additional network card, per panel)
Dimensions
D W H (mm) W (mm) D (mm)
375 375 95
Product Codes
Code Description
DF6100 Intelligent addressable 1 loop control panel
DF61002 Intelligent addressable 2 loop control panel
NC Add to end of product code if network card required
DF61NETKIT Network kit (retro fit)
DF6000PR Passive repeater panel
DTPR6000 Touch screen repeater panel
MFALOG Fire alarm system log book
50
Intelligent Addressable Control Panel - DF6100 and DF61002
51
Intelligent Addressable Control Panel - DF6100 and DF61002
To achieve this each panel must be fitted with a spur of zone of compatible
analogue devices conventional devices
network card (optional extra). When operating as a
networked system all fire and fault event information
can be displayed at every panel.
DF6100
3 independent
volt free output
contacts
3 separate inputs
to accept fire or Mains
shop monitor unit
non fire inputs Supply
mains rated
Mains Supply Mains Supply Mains Supply output relay
contact
input/output unit
Mains
Supply
network connected
repeater panel
2 circuits of
conventional
sounders
52
Intelligent Addressable Control Panel - DF6100 and DF61002
}
SOUNDER SOUNDER
CIRCUIT 1 CIRCUIT 2
-
FAULT RELAY
-
A
B
NETWORK 1
X
NETWORK 1
E
A
B Y
NETWORK 2
X
NETWORK 2
E Y
+ 24V OUT
+
24V dc OUTPUT
-
E
E
LOOP 1
S+
F+
LOOP 1 CONNECTIONS
S-
F-
E
E
LOOP 2
F+
S-
F-
START LOOP TERMINALS
53
Intelligent Addressable Product Range
54
Intelligent Addressable Product Range
DF6000 control panel with printer DF6000 graphite control panel with protective cover and printer
Overview Features
The Menvier DF6000 is a high specification • 1, 2 and 4 loop versions
intelligent addressable control panel available in • Spur tolerant soft addressing
• Full network capability
various loop configurations. It combines
• Optional integral printer
sophisticated functionality with simple operation • Integral battery and power
and a very aesthetically pleasing design. supply
• 200 addresses per loop
The large capacity, ability to support complex cause • Charger with temperature
and effect programming and wide range of user compensation built in
controllable functions make the system suitable for a • Checks battery capacity
diverse range of projects from sheltered housing to
large office developments and industrial applications.
Benefits
DF6000 uses soft addressing to minimise installation • Simple end user interface
time and remove the potential for error associated • Range of compatible ancillaries
with manual addressing. • Easy to design system
• System Integrity
The DF6000 can operate as a stand alone panel or as • Battery life can be extended
part of a networked system. They have powerful
programming options that allow configurable control
over whether messages from specific panels are
transmitted around the network or remain local.
55
Intelligent Addressable Control Panels - DF6000 Range
Technical Specification
Code DF60001 DF60002 DF60004
Description 1 loop control panel 2 loop control panel 4 loop control panel
Standards EN54 Pt2 & Pt4 1998, EN50130 Pt4 1996, EN50130-4 EN54 Pt2 & Pt4 1998, EN50130 Pt4 1996, EN50130-4 EN54 Pt2 & Pt4 1998, EN50130 Pt4 1996, EN50130-4
Specification
Number of Loops 1 2 4
Addresses per Loop 200 200 200
Number of Conventional
Sounder Circuits 4 monitored for open and short circuit 4 monitored for open and short circuit 4 monitored for open and short circuit
Auxiliary Fire Routing
Equipment Output (Monitored) 24V 30mA (max) 24V 30mA (max) 24V 30mA (max)
Auxiliary Fire Protection
Equipment Output (Monitored) 24V 30mA (max) 24V 30mA (max) 24V 30mA (max)
Auxiliary Fault Routing
Equipment Output (Monitored) 12V 30mA (max) 12V 30mA (max) 12V 30mA (max)
System Operating Voltage 24V dc (nom) 24V dc (nom) 24V dc (nom)
Mains Input Supply 230V ac +10% / -15% 230V ac +10% / -15% 230V ac +10% / -15%
Class Change Facility Terminals for connection of external contacts, Terminals for connection of external contacts, Terminals for connection of external contacts,
can also be instigated via input interface can also be instigated via input interface can also be instigated via input interface
Auxiliary Relay 1 set of changeover contacts operate in event of fire condition 1 set of changeover contacts operate in event of fire condition 1 set of changeover contacts operate in event of fire condition
Output Ports RS485, RS232 for connection of repeaters etc RS485, RS232 for connection of repeaters etc RS485, RS232 for connection of repeaters etc
Standby Duration Dependant on loop loading and battery configuration Dependant on loop loading and battery configuration Dependant on loop loading and battery configuration
Battery 2 x 12Ah (standard versions) 2 x 12Ah (standard versions) 4 x 12Ah (EB versions) 2 x 12Ah (standard versions) 4 x 12Ah (EB versions)
Environmental
Operating Temperature -5°C to +40°C -5°C to +40°C -5°C to +40°C
Humidity (Non Condensing) 0 to 75% RH 0 to 75% RH 0 to 75% RH
Physical
Construction Back box - mild steel, front door - PC/ABS Back box - mild steel, front door - PC/ABS Back box - mild steel, front door - PC/ABS
Dimensions (H x W x D) Standard versions: 395mm x 495mm x 180mm Standard versions: 395mm x 495mm x 180mm Standard versions: 395mm x 495mm x 180mm
EB versions: 395mm x 495mm x 280mm EB versions: 395mm x 495mm x 280mm
Weight 18kg 18kg 18kg
Ingress Protection IP30 IP30 IP30
Cable entries Top: 31 cable knockouts (20mm) Back: 12 cable knockouts (20mm) Top: 31 cable knockouts (20mm) Back: 12 cable knockouts (20mm) Top: 31 cable knockouts (20mm) Back: 12 cable knockouts (20mm)
System Networking Fully networkable up to 126 panels Fully networkable up to 126 panels Fully networkable up to 126 panels
(requires additional network card - 1 per panel) (requires additional network card - 1 per panel) (requires additional network card - 1 per panel)
56
Intelligent Addressable Control Panels - DF6000 Range
57
Intelligent Addressable Control Panels - DF6000 Range
To achieve this each panel must be fitted with a spur of zone of compatible
analogue devices conventional devices
network card (optional extra). When operating as a
networked system all fire and fault event information loops 2-4
can be displayed at every panel. if fitted
Networking DF6000
3 independent
volt free output
contacts
3 separate inputs
to accept fire or Mains
shop monitor unit
non fire inputs Supply
mains rated
Mains Supply Mains Supply Mains Supply
output relay
contact
input/output unit
Mains
Supply
network connected
2 circuits of repeater panel
conventional
sounders
58
Intelligent Addressable Control Panels - DF6000 Range
}
NO
RELAY
AUX
- +
O/P
-
FIRE
R/E
- +
P/E
START LOOP 1
LOOP 1
S-
F-
FINISH LOOP 1
F+
S+
START LOOP 2
LOOP 2
S-
F-
LOOP CIRCUITS
FINISH LOOP 2
F+
S+
START LOOP 3
LOOP 3
S-
F-
FINISH LOOP 3
F+
S+
START LOOP 4
S-
LOOP 4
F-
FINISH LOOP 4
F+
CHANGE
- +
CLASS
1-
+
2-
+
SOUNDER
CIRCUIT 2
1-
+
}
Tx
MODEM/PC
Rx
(IF REQUIRED)
CTS RTS 0V
REPEATER
Tx+ Tx-
MIMC
59
Intelligent Addressable Product Range
60
Intelligent Addressable Product Range
Overview Features
The DF6000PR is a cost effective passive repeater • Up to 20 repeaters can be
panel which can be programmed via its informative connected to the loop
• 2 x 40 backlit LCD display and
display to be either fully passive (display only) or
6 supervisory LED’s
semi passive (restricted system control). • Compact size
• Can be surface or semi-
When loop connected the repeater panel will display recessed mounted
the system information text of the connected control
panel and will provide a fire indication, with panel
number, of any connected network control panel that Benefits
2 x 40 backlit LCD display and 6 supervisory LED’s has fire activation.
• Menu driven easy to operate
The DF6000PR repeater panel only requires • Simple connection to panel
programming with local text information. loop circuit reduces wiring and
installation time
In addition to the repeater panels main menu driven • Distance run up to 2km from
2 x 40 backlit LCD display, which provides system main panel without additional
status information, it also has 6 supervisory LED’s cable and equipment, saving
(Power On, Alarm, Trouble, Supervisory, Test In cost
Progress, and Scroll).
61
Intelligent Addressable Passive Repeater Panel - DF6000PR
MUTE SCROLL
Mains Input Voltage 230V ac +10% / -15%
BUZZER
H
1 2 3 4 5
Operating Voltage 24V dc
System Indicators Power on, fire, fault, test, disable and scroll
System Controls Silence alarms, evacuate and reset
Input Ports RS232 (for connection of programmer)
D2 Battery 1 x 12V 3.2Ah
Standby Duration 24 hours
Environmental
H (mm) W (mm) D1 (mm) D2 (mm) Operating Temperature 0°C to +25°C
270 332 45 47 Humidity (Non Condensing) 0 to 75% RH
Physical
Construction PC/ABS
Colour Light Grey
Dimensions (H x W x D) 332mm x 270mm x 92mm
Weight 3.6kg
Ingress Protection IP30
Compatibility
Suitable for use with Menvier intelligent addressable fire systems
Mains Supply
Device Overview
System Functionality 1. Panel can be connected to
1. Panel operates in either normal, supervisor or either the detection loop of a
Mains Supply
engineer mode. single panel or to a network as
2. Supervisor and engineer modes are accessed via part of a networked system.
Network Link
4 digit pass codes. 2. Supplied with integral power
3. Supervisor mode allows silence, evacuate and supply and standby battery.
Note: In this configuration the repeater would give
‘text’ information for the panel that is on the reset commands to be sent to host panel (loop
loop, but only address number for the other connected) or to network (network connected).
panel on the network. 4. Engineer mode enables password to be changed if
required and allows access to text download menu
5. When connected to network, all text is transmitted
Network Connected via network, changes to other network panels
update automatically.
Standard Connection
SCREEN
SCREEN
SCREEN
TEXT DOWNLOAD - + - +
Mains Supply
Network Link
Product Codes
Code Description
DF6000PR Intelligent addressable passive repeater panel, loop connected
DF6000PRNC Intelligent addressable passive repeater panel, network connected
62
Intelligent Addressable Product Range
Overview Features
The DTPR6000 touch screen repeater panel • Plug and play. All information is
provides sophisticated ‘touch screen’ functionality downloaded through the
network
yet achieves a simple end-user interface operation
• Touch-screen display
within a compact panel design. • Integrated network capability
allows networking with the
The DTPR6000 is designed to work with all Menvier latest Menvier range of
intelligent addressable fire alarm control panels as intelligent addressable fire
well as other network repeaters. alarm control panels
• Multi language capability
The Menvier touch-screen repeater panel is easy to • Up to 126 repeaters can be
install and commission. All text is transmitted via the connected to the network
network and is automatically updated. • Programmable as an active or
passive repeater
Benefits
• Plug and play requires no
programming
• User friendly touch screen
display
• System integrity, fire alarm
system continues to operate
even if there is a short circuit or
open joint on cable
• Multi language capability
63
Touch Screen Repeater Panel - DTPR6000
System Indicators Power on, fire, fault, test, disable and scroll
System Controls Silence alarms, evacuate and reset
Input Ports RS232 (for connection of programmer)
Battery 2 x 12V 3.2Ah
Standby Duration 24 hours
H (mm) W (mm) D1 (mm) Environmental
375 537 50 Operating Temperature -5°C to +40°C
Humidity (Non Condensing) 0 to 75% RH
Physical
Construction PC/ABS
Colour Graphite
Dimensions (H x W x D) 375mm x 357mm x 50mm
Weight 8kg
Ingress Protection IP30
Compatibility
Suitable for use with Menvier intelligent addressable fire systems
System Functionality
• Panel operates in either normal, supervisor or
Mains Supply engineer mode.
• Supervisor and engineer modes are accessed via
Network Link 4 digit pass codes.
• Supervisor mode allows full system operation.
• Engineer mode enables password to be changed if
required and allows access to text download menu
• When connected to network, all text is transmitted
via network, changes to other network panels
update automatically.
Standard Connection
+24V dc +24V dc FAULT AUX PROGRAMMABLE
NETWORK 1 NETWORK 2
IN OUT RELAY RELAY INPUT
+ - + - A B X Y E A B X Y E NO C NC NO C NC E
TO PANEL EARTH
Product Codes
Code Description
DTPR6000 Intelligent addressable touch screen repeater panel
64
Intelligent Addressable Product Range
Overview Features
The Menvier range of intelligent addressable • Soft addressed
sensors have been specifically designed to operate • Integral short circuit isolator
• Wide range of sensor types
with Menvier intelligent addressable control panels.
• 360° visibility LED
65
Intelligent Addressable Sensors - MAP820, MAOH850 and MAH830
Technical Specification
Code MAP820 MAOH850 MAH830
Description Optical smoke sensor Photo-thermal sensor Multi-mode heat sensor
Standards EN54 Pt7 2000 + A1:2002 EN54 P5 & P7 2000 + A1:2002 EN54 Pt5 2000 + A1:2002
Operating voltage 18V dc to 30V dc 18V dc to 30V dc 18V dc to 30V dc
Standby Current 220µA (max) 220µA (max) 220µA (max)
Alarm Current 5mA (max) 5mA (max) 5mA (max)
Addressing Mode Auto address Auto address Auto address
Specification
Mounting Position Ceiling in open areas Ceiling in open areas Ceiling in open areas
Mounting Options Surface mount with MAB800 base Surface mount with MAB800 base Surface mount with MAB800 base
Area Coverage 100m² (subject to local standard) 100m² (subject to local standard) 50m² (subject to local standard)
System Wiring Min. 1.5mm, 2 core loop or spur Min. 1.5mm, 2 core loop or spur Min. 1.5mm, 2 core loop or spur
Heat Class
Rate of Rise N/A A1S A1R
Fixed Heat 77ºC N/A N/A BS
Fixed Heat 90ºC N/A N/A CS
Alarm Temperature (static)
AIR N/A 60ºC 60ºC
BS N/A N/A 77ºC
CS N/A N/A 90ºC
Indication 360° visibility light pipe 360° visibility light pipe 360° visibility light pipe
Environmental
Operating Temperature -20°C to +60°C -20°C to +50°C -20°C to +60°C
Humidity (non condensing) 0 to 95% RH 0 to 95% RH 0 to 95% RH
Physical
Construction PC/ABS PC/ABS PC/ABS
Colour White White White
Dimensions Excl Base (Dia x D) 101mm x 33mm 101mm x 43mm 101mm x 43mm
Dimensions Incl Base (Dia x D) 104mm x 45mm 104mm x 55mm 104mm x 55mm
Weight (without base) 76g 76g 76g
Compatibility
Suitable for use with Menvier intelligent addressable fire systems Menvier intelligent addressable fire systems Menvier intelligent addressable fire systems
Product Codes
Code Description
MAP820 Intelligent addressable optical smoke sensor
MAOH850 Intelligent addressable photo/thermal sensor
MAH830 Intelligent addressable multi-mode heat sensor
MAB800 Intelligent addressable common base
MAB800*10 Intelligent addressable common base (pack of 10)
MDP201 Duct Probe
66
Intelligent Addressable Product Range
Overview Features
MAOH850 photo-thermal sensor • Sensor shorting link
The MAB800 Menvier intelligent addressable
standard base has been specifically designed to be • Separate loop in and loop out
terminals
compatible with Menvier intelligent addressable
• Stand off fixing feature
sensors. • Accepts side entry cables
• Selectable sensor locking
This standard base has been designed for flexibility, feature
simplicity and speed of installation. It incorporates a
purpose designed shorting link to ensure wiring
continuity if a sensor is removed. Benefits
The standard base incorporates a retaining clip to • Quick and simple to install
provide positive feedback when sensor is correctly • Accepts side entry surface
fitted and a retaining clip that can be replaced with cables
locking device (supplied with base) to prevent • Common base for Menvier
MAH830 multi-mode heat sensor unauthorised sensor removal. intelligent addressable sensors
67
Intelligent Addressable Standard Base - MAB800
Dia
Standard Connection
+
remote indicator (optional)
+V
S+ 4 4
Intelligent Addressable
E E
Loop start
Compatible Menvier
S-
Control Panel
3 3
LED
LED
F-
Loop finish
1 1
F+
2 2
- VE OUT
- VE IN
WARNING:
If using the outer connection on terminal 2, ensure the operation of the switch is not impeded
and that there are no shorts between terminal 2 and the switch contact
Ensure that cable or end of line resistor leg does not short onto the contact.
Product Codes
Code Description
MAB800 Intelligent addressable standard base
68
Intelligent Addressable Product Range
Overview Features
The intelligent addressable Menvier sounder base • Integral sensor mounting base
has been developed specifically to operate with the • Can be used with a sensor as
a sounder base or stand alone
latest generation of Menvier intelligent addressable
sounder
panels and to complement the latest generation of • Optional cover plate available
Menvier intelligent addressable sensors.
MAS850 incorporates standard detector base
The MAS850 sounder base incorporates a sensor Benefits
mounting base, a sensor can be fitted to the sounder
• First fix base
base or alternatively an optional cover plate can be
• Selectable tones controlled by
used to enable the sounder to operate as a dedicated
the panel
discreet stand alone sounder.
• Adjustable volume controlled
by the panel
69
Intelligent Addressable Sounder Base - MAS850
Standard Connection
3 3
Intelligent Addressable
Loop start
- -
Compatible Menvier
+ - + + - +
S+ 2 E 2
Control Panel
E
S-
4 4
Loop finish
F-
LED 1 LED 1
F+
WARNING:
Do NOT use high voltage testers if ANY equipment is connected to the system.
Earth screen must be continuous along entire length of loop.
NOTE:
Base terminal 1, 2, 3 and 4 not used. All wiring terminates as shown above.
Product Codes
Code Description
MAS850 Intelligent addressable sounder base
MASC Sounder cover plates (pack of 5)
70
Intelligent Addressable Product Range
Overview Features
The intelligent addressable Menvier sounder • Integral sounder base
beacon base has been developed specifically to • Integral high output LED
beacon
operate with the latest generation of Menvier
• Integral sensor mounting base
intelligent addressable panels and Menvier sensors. • Can be used with a sensor or
stand alone
The MASB870 sounder beacon base includes all the • Selectable tones controlled by
features of the intelligent addressable sounder base the panel
as well as a powerful LED beacon. • Adjustable volume controlled
by the panel
The intelligent addressable beacon base incorporates • Optional cover plate available
a detector mounting base, a sensor can be fitted
directly to the base, or alternatively an optional cover
plate can be used to provide a dedicated discreet Benefits
stand alone device.
• Saves time and installation
costs
• Single point connection for
sensor, sounder and LED
strobe
71
Intelligent Addressable Sounder Beacon Base - MASB870
Standard Connection
3 3
Intelligent Addressable
Loop start
- -
Compatible Menvier
+ - + + - +
S+ 2 E 2
Control Panel
E
S-
4 4
Loop finish
F-
LED 1 LED 1
F+
WARNING:
Do NOT use high voltage testers if ANY equipment is connected to the system.
Earth screen must be continuous along entire length of loop.
NOTE:
Base terminal 1, 2, 3 and 4 not used. All wiring terminates as shown above.
Product Codes
Code Description
MASB870 Intelligent addressable sounder beacon base
MASC Sounder beacon cover plates (pack of 5)
72
Intelligent Addressable Product Range
Overview Features
• Simple to install
The MRIAD intelligent addressable loop connected • Fits onto standard single gang
remote indicator is designed to provide discreet back box
remote indication, which is controlled by the • Wide viewing angle high
intelligent addressable fire panel, whilst providing brightness LED
• Attractive styling
the ability to monitor multiple detectors within an
area thereby minimising wiring requirements.
Benefits
The unit is connected directly on the loop, is ‘soft
• Can be remote mounted
addressed’ by the panel on system start up and is
• Controlled by the panel
fitted with integral short circuit isolators.
• Can be activated by cause and
effect
When using “Site installer” the MRIAD should be
• Reduced cost
programmed as an address output (sounder) and
• Minimises cabling
can be programmed using the comprehensive cause
and effect tables to operate continuous, pulsing, by
global, panel, zone, address or on double knock input
etc.
73
Intelligent Addressable Remote Indicator - MRIAD
plate. reset.
- + - + 4. Front cover is pushed onto base plate and locks in 3. Low current consumption.
place.
LOOP
LOOP
Compatible Menvier
OUT
IN
Intelligent Addressable
Control Panel
WARNING:
Do NOT use high voltage testers if ANY equipment is
connected to the system.
Product Codes
Code Description
MRIAD Intelligent addressable loop connected remote indicator
74
Intelligent Addressable Product Range
Overview Features
The Menvier loop powered reflective beam • Quick and simple to install
detectors are specifically designed to function with • IP40 protection
• Simple loop connection
the latest intelligent addressable Menvier control
• No power supply required
panels.
combined transmitter and receiver for ease of
installation Two versions are available, the MAB50R with a range Benefits
of up to 50 metres, and the MAB100R with a range of
50 - 100 metres. • Saves time and installation
costs
Both of these units are extremely simple to install, • Single device to install instead
they require no separate power supply, operate on a of numerous point detectors
reflective principle and have a simple set up mode to • Single point of maintenance
enable easy and quick alignment during installation. • Wall mounted for ease of
maintenance, especially in
Beam detectors are designed to replace individual warehouses with racking
point detectors in large open areas such as
warehouses.
75
Intelligent Addressable Reflective Beam Detectors - MAB50R and MAB100R
210 130 120 Description Reflective beam detector Reflective beam detector
Standards EN54 Pt 12 & 17 2002 EN54 Pt 12 & 17 2002
Specification
H D
Operating Voltage 18V dc to 30V dc 18V dc to 30V dc
Quiescent Current <5mA (no LED’s illuminated) <5mA (no LED’s illuminated)
Alarm Current <9mA <9mA
Alignment Current <18mA <18mA
• Alignment mode
4. Mounting bracket has facilities for glanding of Enables accurate fine tuning
+ - + -
incoming cables plus simple fixing of beam of beam alignment without
LOOP
LOOP
Compatible Menvier
OUT
detector.
IN
Product Codes
Code Description
MAB50R Intelligent addressable reflective beam detector 50m range
MAB100R Intelligent addressable reflective beam detector 100m range
MRBFP Mounting bracket
76
Intelligent Addressable Product Range
MBG813 callpoint
Overview Features
This attractively designed simple to install range of • Fast fit clip on front cover
callpoints have been specifically developed to be • High visibility status LED
• Standard and weatherproof
compatible with Menvier intelligent addressable fire
versions available
systems. • Wide range of available
accessories
There are two versions of callpoint in this range. The • Heavy duty terminals
MBGHCC protective hinged cover MBG813 which can be either surface or flush
mounted and the MBG817 weatherproof version.
Benefits
All callpoints are supplied as standard with a
frangible glass element and a test key for ease of • Quick and simple to install
maintenance. • Fast fit clip on front cover
• Single tool for test and access
A comprehensive range of accessories are available
to maximise the functionality of the callpoint for
particular applications.
77
Intelligent Addressable Callpoints - MBG813 and MBG817
Screen
OUT
2. Callpoint has test facility via special test key to • Replacement test key
E - + E - + prevent unauthorised operation. • Replacement glass elements
LOOP
LOOP
Compatible Menvier 3. Insertion of test key for test purposes and for cover • Earth continuity links
OUT
IN
Intelligent Addressable
Control Panel removal is at bottom of callpoint to facilitate ease
of access when mounted next to door architrave.
WARNING:
4. Test key is dual function, used to test callpoint
Do NOT use high voltage testers if ANY equipment is operation by simulating activation and also to allow
connected to the system. removal of clip on cover to gain access to element.
5. Element is held in place by clip on self locking
Screen (Earth) must be continuous along entire length of loop. cover which can only be removed by use of a
special tool (callpoint test key).
6. Separate loop in and loop out terminals are
provided for all connections including screen
continuity on intelligent addressable callpoints.
7. Surface/flush callpoints are IP42, weatherproof is
IP65.
User Interface
1. To enable quick and simple installation, callpoints
use a fast fit self locking clip on front cover which
is very simple to fit, but once in place, can only
be removed by use of a special key (supplied).
2. Callpoint is triggered by pressing against the
element.
Product Codes
Code Description
MBG813 Intelligent addressable surface/flush callpoint
MBG817 Intelligent addressable weatherproof callpoint
MBGHCC Protective hinged cover
MBGSP Spacer plates (pack of 10)
MBGBEZ Recessing bezels (pack of 10)
MBGREKIT Resettable element kit (pack of 10)
MBG118 Spare break glasses (pack of 5)
MBG119 Earth continuity links (pack of 5)
MFBGKEY3 Callpoint keys (pack of 10)
78
Intelligent Addressable Product Range
Overview Features
The Menvier intelligent addressable wall sounder MAS850LPS
has been developed specifically to operate with • Loop powered
Menvier intelligent addressable control panels. • High efficiency design
• Selectable tones controlled by
the panel
The high efficiency design of these wall sounders
• Adjustable volume controlled
offer excellent sound output levels despite the low
by the panel
current consumption.
• Simple clip fixing assembly
MAS850LPS
MAS850LPSWP
internal base The Menvier MAS850LPS is designed for wall
• Weatherproof version (IP66)
mounting, has a choice of different tones and volume
• Loop powered
levels, a built in short circuit isolator and is soft
• High efficiency design
addressed for ease of installation.
• Selectable tones controlled by
the panel
MAS850LPSWP • Adjustable volume controlled
The Menvier MAS850LPSWP is IP66 rated so by the panel
suitable for external and wash down areas, it is • Simple clip fixing assembly
designed for wall mounting, has a choice of different
tones and volume levels, a built in short circuit
isolator and is soft addressed for ease of installation. Benefits
• Low current consumption
• First fix back box
• Built in short circuit isolators
weatherproof base
79
Intelligent Addressable Wall Sounders - MAS850LPS and MAS850LPSWP
H
Operating Voltage 17V dc to 32V dc 17V dc to 32V dc
H
Standby Current < 320μA < 320μA
Tones (set by panel) Continuous: 984Hz Continuous: 984Hz
Pulsed: 984Hz / 0Hz pulse 1Hz Pulsed: 984Hz / 0Hz pulse 1Hz
W Two tone: 644 / 984Hz @ 1Hz cycle Two tone: 644 / 984Hz @ 1Hz cycle
Slow whoop: 500-1200Hz in 3.5 seconds/0.5secs gap Slow whoop: 500-1200Hz in 3.5 seconds/0.5secs gap
Internal Weatherproof Sound Output @ +/-3dB Low volume : 87dB at <2mA Low volume : 87dB at <2mA
wall sounder wall sounder (set by panel) Medium volume : 93dB at <3mA Medium volume : 93dB at <3mA
High volume: 100dB @ <6mA High volume: 100dB @ <6mA
Environmental
Description H (mm) W (mm) D (mm) Operating Temperature -10°C to +55°C -10°C to +55°C
Internal 105 105 95 Humidity (Non Condensing) 0 to 95% RH 0 to 95% RH
Weatherproof 108 108 103 Physical
Construction PC/ABS PC/ABS
Colour Red Red
Dimensions (H x W x D) 105mm x 105mm x 95mm 108mm x 108mm x 103mm
Weight 0.25kg 0.57kg
Ingress Protection IP42 IP66
Cable Entry Rear/side Rear/side
Compatibility
Suitable for use with Menvier intelligent addressable fire systems Menvier intelligent addressable fire systems
Screen
2. First fix base is fixed to mounting surface using panel, no need to access
OUT
LOOP
Compatible Menvier
OUT
Intelligent Addressable
Control Panel 5. Main body is then clipped into position on
mounting base, body locks into position when
WARNING: pressed home.
Do NOT use high voltage testers if ANY equipment is
connected to the system. MAS850LPSWP
1. Installation is simple using first fix base.
Screen (Earth) must be continuous along entire length of loop.
2. First fix base is fixed to mounting surface using
2 fixing holes.
3. Cable entry can be rear or side.
4. Connections are to connector block on main
sounder body.
5. Main body is then fastened onto base, using
4 allen head screws (supplied).
Product Codes
Code Description
MAS850LPS Intelligent addressable internal wall sounder
MAS850LPSWP Intelligent addressable weatherproof wall sounder
80
Intelligent Addressable Product Range
MASB860WP weatherproof wall sounder beacon MASB860 internal wall sounder beacon
Overview Features
The Menvier intelligent addressable wall sounder MASB860
beacon has been developed specifically to operate • Loop powered
with the latest generation of Menvier intelligent • Combined sounder beacon
• High efficiency design
addressable control panels.
• Selectable tones controlled by
the panel
The high efficiency design offers excellent sound • Adjustable volume controlled
output levels despite the low current consumption. by the panel
Whilst also includes a high powered LED beacon to
provide both audible and visual alarm signals.
MASB860WP
internal base • Weatherproof version (IP66)
MASB860 • Loop powered
The Menvier MASB860 is designed for wall mounting, • Combined sounder beacon
has a choice of different tones and volume levels, a • High efficiency design
built in short circuit isolator and is soft addressed for • Selectable tones controlled by
ease of installation. the panel
• Adjustable volume controlled
MASB860WP by the panel
The Menvier MASB860WP is IP66 rated so suitable
for external and wash down areas, it designed for
wall mounting, has a choice of different tones and Benefits
volume levels, a built in short circuit isolator and is
• Low current
soft addressed for ease of installation.
• High efficency audio / visual
unit suitable for DDA
compliance
weatherproof base
81
Intelligent Addressable Wall Sounder Beacons - MASB860 and MASB860WP
Screen
2. First fix base is fixed to mounting surface using panel, no need to access
OUT
LOOP
Compatible Menvier
OUT
Intelligent Addressable
Control Panel 5. Main body is then clipped into position on
mounting base, body locks into position when
WARNING: pressed home.
Do NOT use high voltage testers if ANY equipment is
connected to the system. MASB860WP
1. Installation is simple using first fix base.
Screen (Earth) must be continuous along entire length of loop.
2. First fix base is fixed to mounting surface using
2 fixing holes.
3. Cable entry can be rear or side.
4. Connections are to connector block on main
sounder body.
5. Main body is then fastened onto base, using
4 allen head screws (supplied).
Product Codes
Code Description
MASB860 Intelligent addressable internal wall sounder beacon
MASB860WP Intelligent addressable weatherproof wall sounder beacon
82
Intelligent Addressable Product Range
Overview Features
The Menvier intelligent addressable loop connected • High efficiency design
LED beacon is available to complement audible • LED technology
• Low profile design
alarms for use in areas either where people may be
present who have impaired hearing or areas with
high ambient noise levels. Benefits
• Low current
The Menvier MAB870 is designed for both wall and
• High efficency LED / visual
ceiling mounting, has a built in short circuit isolator
unit suitable for DDA
and is soft addressed for ease of installation.
compliance
83
Intelligent Addressable Loop Connected LED Beacon - MAB870
D
Standby Current < 250μA
Alarm Current < 4.1mA
Flash Frequency 1/2Hz
Environmental
Dia
Operating Temperature -10°C to +55°C
Humidity (Non Condensing) 0 to 95% RH
Physical
Construction PC/ABS
Colour Red
Dimensions (Dia x D) 95mm x 53mm
Weight 0.15kg
Ingress Protection IP54
Compatibility
Suitable for use with Menvier intelligent addressable fire systems
Screen
OUT
LOOP
Compatible Menvier 5. Beacon body is pressed into first fix base then installation.
OUT
IN
Intelligent Addressable
Control Panel twisted to lock into position.
WARNING:
Do NOT use high voltage testers if ANY equipment is
connected to the system.
Product Codes
Code Description
MAB870 Intelligent addressable loop connected LED beacon
84
Intelligent Addressable Product Range
Overview Features
An extensive range of interfaces are available to • Quick and simple to install
support the Menvier range of control panels, • Avoids the need to wire
conventional sounders back
providing solutions for most design requirements.
to the main panel
• 4 separate sounder circuits
The MPU424 4 way sounder controller unit is a loop
(0.4A)
connected interface, which provides the facility to
• All outputs are independently
power and control 4 independent conventional
programmable
sounder circuits. This greatly simplifies installation in
• Battery backup via integral
applications where specialist sounders or beacons
battery
are required by avoiding the need to connect them
• Built in short circuit isolator
directly to the intelligent addressable control panel.
• Built in power supply
The unit only uses a single address yet each circuit
can be independently controlled according to the Benefits
required cause and effect programming.
• Plug and play, no hard
addressing required
• Increased system integrity
• No external short circuit
isolator required
• Beacon and strobe can be
wired direct to the interface
thereby saving time and
cabling
• Reduce cost of installation
85
Intelligent Addressable 4 Way Sounder Controller Unit - MPU424
Installation
1. The sounder controller interface requires a local
unswitched 230V supply and incorporates a back
up battery to maintain functionality under mains
failure conditions.
2. Cable entry can be top or rear.
3. Top entry is via 20mm conduit entries (pre-fitted
with blanking plugs for unused entries).
4. Rear entry via substantial cable slot in metal back plate
5. Top cover secured with tamper resistant screws
Standard Connections
6K8 6K8 6K8 6K8
230V ac mains
FIRE RELAY
N/O C N/C
L N E E + - E + - E + - E + - E - + E - +
OUT IN
+
+
BATT
back up
- battery
-
NOTES:
1. Earth (Screen) cable must be connected to its adjacent earth terminal.
2. The end of line resistor must always be fitted, even if input is not used.
3. Sounder circuits are monitored for wiring open and short circuit.
4. Output fire relay is a set of changeover volt free-contacts and is not monitored.
5. This unit should only be finally connected to the 230V ac mains supply and battery,
during system commissioning.
Product Codes
Code Description
MPU424 4 way sounder controller unit
86
Intelligent Addressable Product Range
Overview Features
An extensive range of interfaces are available to • Quick and simple to install
support the Menvier range of control panels, • Accepts a zone of Menvier
conventional detector heads
providing solutions for most design requirements.
and callpoints (detectors must
be connected via the Cooper
The MIU871 zone monitor unit connects zones
CDBB300 mounting base)
of suitable conventional detectors.
• Only takes a single address
• Input monitored for open, short
circuits and ground trouble
• Built in short circuit isolator
Benefits
• Plug and play no hard
addressing required
• Easy to expand a system using
existing wiring
• No external short circuit
isolator required
87
Intelligent Addressable Zone Monitor Unit - MIU871
Installation
1. Zone monitor unit is fixed to a deep double gang
back box (supplied).
2. All connections are via heavy duty terminals.
3. Cable entry can be top, bottom, side or rear.
4. Can be surface or semi recessed mounted.
Standard Connections
EOLM-1
6K
- OUT +
- IN +
intelligent addressable loop
- OUT+
- IN +
E - + E - + E - + E - +
NOTES:
1. Earth (Screen) cable must be connected to its adjacent earth terminal.
2. The end of line resistor must always be fitted, even if input is not used.
3. Maximum spur length - see BS5839 Pt:1 2002 for zone coverage.
4. There is no maximum number of conventional callpoints allowed per zone output.
5. Unit can only be used with its respective Cooper fire systems and compatible sensor and base.
88
Intelligent Addressable Product Range
Overview Features
An extensive range of interfaces are available to • Quick and simple to install
support the Menvier range of control panels, • Accepts a zone of Menvier
conventional detector heads
providing solutions for most design requirements.
and callpoints (detectors must
be connected via the Cooper
The MSU840 shop monitor unit is designed to
CDBB300 mounting base)
enable small units with conventional fire detection to
• Provides 2 conventional
be fully integrated with a main intelligent addressable
sounder circuits
fire system. It is ideal for applications such as
• Only takes a single address
connecting individual shop units into a main
• Includes output changeover
shopping centre system. An external power supply is
relay
required to drive the 2 conventional sounder circuits.
• Inputs monitored for open,
This power supply must be regulated for fire and
short circuits and ground
current limited.
trouble
Benefits
• Plug and play no hard
addressing required
• Easy to expand a system using
existing wiring
• No external short circuit
isolator required
• Reduced installation cost by
using the 2 sounder circuits
89
Intelligent Addressable Shop Monitor Unit - MSU840
Standard Connections
24V dc output
EOLM-1 power supply unit
FAULT CONTACT 24V
6K8 12K 12K
N/O O/P
- Out +
- In +
- +
12K
intelligent addressable loop
- Out +
- In +
E - + E - + E - + E - + N/O C N/C + - + - E - +
OUT IN + - E + - 24V
CALLPOINT DETECTOR EXTERNAL
LOOP ZONE ZONE 1 2 PSU EXTERNAL
SOUNDER MONITOR PSU
INPUT
FIRE RELAY
90
Intelligent Addressable Product Range
Overview Features
An extensive range of interfaces are available to • Quick and simple to install
support the Menvier range of control panels, • Allows a spur of intelligent
addressable devices to be fed
providing solutions for most design requirements.
from the main loop
• Integral short circuit isolators
The MSI850 spur isolator unit enables a spur of
for the loop and the spur
intelligent addressable devices to be connected to a
• Automatically controls
main analogue loop, the device is designed to
addressing sequence
simplify installation of remote parts of buildings or for
• Built in short circuit isolator
simple system extensions.
Benefits
• Plug and play no hard
addressing required
• Easy to expand a system using
existing wiring
• Reduced installation cost
• No external short circuit
isolator required
91
Intelligent Addressable Spur Isolator Unit - MSI850
Installation
1. Please refer to current edition of BS5839-1 for
details of the maximum allowable area to be
covered by a single zone.
2. Spur isolator unit is fixed to a deep double gang
back box (supplied).
3. All connections are via heavy duty terminals.
4. Cable entry can be top, bottom, side or rear.
5. Can be surface or semi recessed mounted.
Standard Connections
OUT
+
intelligent
addressable loop no end of line
E resistor required
m
IN
SPUR
+
+
NOTES:
1. Earth (Screen) cable must be connected to its adjacent earth terminal.
2. For maximum spur length/load see BS5839 Pt1:2002.
3. Unit can only be used with its respective Cooper fire systems and compatible sensor and base.
Product Codes
Code Description
MSI850 Spur isolator unit
92
Intelligent Addressable Product Range
Overview Features
An extensive range of interfaces are available to • Quick and simple to install
support the Menvier range of control panels, • Soft addressed
• 3 separate inputs and 3
providing solutions for most design requirements.
separate outputs
• Inputs monitored for open and
The MIO324 3 channel I/O unit enables simple
short circuits
interfacing between the fire system and other
• Integral short circuit isolator
equipment such as nurse call systems or access
control systems. The inputs are fully monitored for
open and short circuits. Benefits
• Plug and play no hard
addressing required
• Built in short circuit isolator no
additional hardware required
• Unit takes 3 inputs, 3 outputs
- only 1 address required to
monitor and control saving on
equipment and installation
93
Intelligent Addressable 3 Channel I/O Unit - MIO324 and MIO324T
Installation
1. 3 Channel input output unit is fixed to a deep
double gang back box (supplied).
2. All connections are via heavy duty terminals.
3. Cable entry can be top, bottom, side or rear.
4. Can be surface or semi recessed mounted.
5. Relay contacts are rated at 24V dc 1A.
Standard Connections
OUTPUTS
E - + E - + - + - + - + N/O C N/C N/O C N/C N/O C N/C
IN OUT INPUTS
LOOP
NOTES:
1. Earth (Screen) cable must be connected to its adjacent earth terminal.
2. The end of line resistor must always be fitted, even if input is not used.
3. Input circuit is monitored for wiring open and short circuit.
4. Output relay is a set of changeover volt free-contacts and is not monitored.
Product Codes
Code Description
MIO324 3 channel I/O unit
MIO324S 3 channel I/O unit, resets on silence
MIO324T 3 channel I/O unit, contains 3 separate addresses
94
Intelligent Addressable Product Range
Overview Features
An extensive range of interfaces are available to • Quick and simple to install
support the Menvier range of control panels, • Soft addressed
• Only takes a single address
providing solutions for most design requirements.
• Integral short circuit isolator
The MIO1240 230V ac relay unit enables simple
interfacing between the fire system and other Benefits
equipment such as nurse call systems or access
control systems. • Plug and play no hard
addressing required
The ability of the output unit to switch mains also • Easy to expand a system using
makes the unit ideal for plant control or mains existing wiring
powered door holders. • No external short circuit
isolator required
The input is monitored for open and short circuits
therefore can be used for fire input applications such
as monitoring sprinkler flow switches.
95
Intelligent Addressable - 230V ac Relay Unit - MIO1240
Installation
1. Mains rated input relay is designed for surface
fixing.
2. All connections are via heavy duty terminals.
3. Cable entry can be top, bottom or side.
4. Output relay contacts are rated at 230V ac.
Standard Connections
5K6
E - + E - + - + E C N/C N/O
IN OUT
SPUR INPUT
NOTES:
1. Earth (Screen) cable must be connected to its adjacent earth terminal.
2. The end of line resistor must always be fitted, even if input is not used.
3. Input circuit is monitored for wiring open and short circuit.
4. Output relay is a set of changeover volt free-contacts and is not monitored.
Product Codes
Code Description
MIO1240 230V ac relay unit
96
Intelligent Addressable Product Range
Overview Features
An extensive range of micro interfaces are available • Quick and simple to install
to support the Menvier range of control panels, • Accepts a zone of Menvier
conventional detector heads
providing solutions for most design requirements.
and callpoints (detectors must
be connected via the Cooper
The MIU872 is a single zone input, soft addressed,
CDBB300 mounting base)
micro interface, incorporating integral short circuit
• Only takes a single address
isolators.
• Input monitored for open and
short ground trouble
It is fully compatible with the current range of Menvier
• Active end of line monitoring
intelligent addressable fire detection panels.
• Built in short circuit isolator
It is suitable for interfacing a zone of up to 20
conventional Menvier detectors onto a Menvier Benefits
intelligent addressable control panel.
• Plug and play no hard
It will operate with any Menvier conventional detector addressing required
in configuration with a schottky diode type base. • Easy to expand a system using
existing wiring
• No external short circuit
isolator required
97
Intelligent Addressable Micro Zone Monitor Unit - MIU872
H
Load With 20 Detectors,
W
and Unlimited Callpoints 3.2mA (nom)
Alarm Load With 20 Detectors,
and Unlimited Callpoints 8.0mA (nom)
Detector Zone
Mounting Details Detectors per Zone 20 (max)
End of Line Monitor Active end of line unit - EOLM-1
Fire Input Trigger Resistance 680Ω (nom)
Short Circuit Fault
Threshold Resistance 100Ω (max)
Open Circuit Fault
22mm
Installation
1. Suitable for use with any Menvier conventional detector.
2. Connections suitable for single strand fireproof cable up.
to 2.5mm2.
3. Loop and output cable screen must be connected to
interface earth terminals.
Standard Connections
EOLM-1
IN+
IN-
EARTH LOOP IN
98
Intelligent Addressable Product Range
MCOM-R micro single channel output unit MCOM micro single channel output unit
Overview Features
An extensive range of micro interfaces are available • Quick and simple to install
to support the Menvier range of control panels, • Compact size
• Soft Addressed
providing solutions for most design requirements.
• Integral short circuit isolator
The MCOM is a single output, soft addressed, micro
interface, incorporating integral short circuit isolators. Benefits
It is extremely compact and therefore ideal for
incorporation into other equipment. • Plug and play no hard
MCOM-S addressing required
The MCOM is fully compatible with the current range • No external short circuit
MCOM-S micro single channel output unit isolator required
of Menvier intelligent addressable fire control panels.
Optional Variants
99
Intelligent Addressable Micro Single Channel Output Units
H
Output Relay
W
Switching Voltage 24V dc to 30V dc
Contact Rating 1A
Switching Power 30 Watts
Environmental
Mounting Details Operating temperature -10ºC to +60ºC
Humidity (non condensing) 0 to 95% RH
Physical
Construction PC/ABS
Dimensions (H x W x D) 65mm x 35mm x 18.5mm
Weight 0.078kg
22mm
Installation
1. Suitable for switching 24V dc control circuits
37.5mm
(fire door retainers etc).
2. Connections suitable for single strand fireproof
cable up to 2.5mm2.
3. Loop and output cable screen must be connected
to interface earth terminals.
4. The relay output is a set of change over,
non-latching, volt free contacts which are non
monitored.
Standard Connections
N/O
N/C
LOOP IN
C
Product Codes
Code Description
MCOM Micro single channel output unit (recognised as output unit)
MCOM-S Micro single channel output unit (recognised as sounder)
MCOM-R Micro single channel output unit (5 second reset pulse)
100
Intelligent Addressable Product Range
MCIM-NF micro single channel output unit MCIM micro single channel output unit
Overview Features
An extensive range of micro interfaces are available • Quick and simple to install
to support the Menvier range of control panels, • Compact size
• Soft Addressed
providing solutions for most design requirements.
• Integral short circuit isolator
The MCIM is a single input, soft addressed micro
interface, incorporating integral short circuit isolators. Benefits
It is extremely compact and therefore ideal for
incorporation into other equipment. • Plug and play no hard
addressing required
The MCIM is fully compatible with the current range • No external short circuit
MCIM-C micro single channel output unit isolator required
of Menvier intelligent addressable fire control panels.
Optional Variants
101
Intelligent Addressable Micro Single Channel Input Units
H
Inputs
W
Trigger Resistance 5K6Ω
End of Line Resistor 22KΩ
Short Circuit Fault
Threshold Resistance 1KΩ
Mounting Details Open Circuit Fault
Threshold Resistance 33KΩ
Environmental
Operating temperature -10ºC to +60ºC
Humidity (non condensing) 0 to 95% RH
Physical
22mm
Construction PC/ABS
Dimensions (H x W x D) 65mm x 35mm x 18.5mm
Weight 0.078kg
Ingress protection IP40
Compatibility
Suitable for use with Menvier intelligent addressable fire systems
37.5mm
Installation
1. Inputs monitored for open and short circuit fault
conditions.
2. Suitable for monitoring normally open volt free contacts
(flow switches etc).
3. Connections suitable for single strand fireproof cable up
to 2.5mm2.
5. Loop and output cable screen must be connected to
interface earth terminals
6. The end of line monitoring resistor, must always be fitted
at the end of the input wiring, if the input is unused the
end of line resistor must be fitted at the interface input
terminals.
Standard Connections
5K6
IN+
IN-
22K
EARTH LOOP IN
INPUT
LOOP OUT
Product Codes
Code Description
MCIM Micro single channel input unit (recognised as input unit)
MCIM-C Micro single channel input unit (recognised as callpoint)
MCIM-NF Micro single channel input unit (non fire input)
102
Ancillaries and Test Equipment
Overview Features
The Menvier heavy duty relay unit is designed for • Simple to install
interfacing heavy loads such as door release units • Visible status indication LED
• Double pole change over
or plant shut down equipment with fire alarm
contacts
systems.
103
Heavy Duty Relay Unit - MAR724
W Specification
Coil Rating 24V dc 10mA
Contact Rating 10A at 240V ac or 30V dc
Contacts 2 x sets of changeover contacts
Environmental
H Operating Temperature -10°C to +55°C
D
Humidity (Non Condensing) 0 to 95% RH
Physical
Construction PC/ABS
Dimensions (H x W x D) 89mm x 150mm x 58mm
Weight 0.24Kg
Ingress Protection IP30
Compatibility
Suitable for use with Menvier fire systems
Interface Options
NC C NO NC C NO + -
1. Relay is powered by an external 24V dc supply.
Compatible Menvier
24V dc OUTPUT
Control Panel
WARNING:
Do NOT use high voltage testers if ANY equipment is
connected to the system.
Product Codes
Code Description
MAR724 Heavy duty relay unit
104
Ancillaries and Test Equipment
Overview Features
The FX1A is a 24V dc battery backed power supply • Compact enclosure
unit complete with back up batteries. • Integral battery
• Fault indicator
• Remote fault contact
The output is continuous and transition from mains to
battery is without break in the output. It is monitored
and has local fault indication as well as volt free Benefits
contacts for remote fault signalling, making it ideal as
a general purpose power supply for fire alarm • Simple to use
applications. • Secure steel enclosure
• Built in battery back up
105
Power Supply - FX1A
Product Codes
Code Description
FX1A 24V dc power supply unit, with battery backup
FASP0429 24V dc power supply unit, no battery backup
106
Ancillaries and Test Equipment
Overview Features
The LP800 loop tester is a hardware / software • Pre-addressing: Identifies all
combination that can be used to test, commission Menvier field devices and
determines their address and
and fault find a loop of up to 200 Menvier intelligent
device type
addressable devices (sensors, sounders, ancillary • Analogue Values: Constantly
devices) without having to connect the loop to the displays in real time the
Menvier intelligent addressable fire panel. analogue value of all Menvier
loop devices in order to
The loop tester is connected between the loop and determine their status
PC. It allows the engineer to quickly identify and • Test LED: This command
LP800KIT loop tester kit box locate any loop device that is operating outside its operates the LED of any
operating conditions by varying the alarm threshold inputs (detector/call points) as
of any loop device (alarm, prealarm and fault). well as controls the outputs of
sounders and output modules
The loop tester hardware requires a free serial port on • Device Settings: Analogue
the PC, either internal or via a USB extension, a values of all devices can be
mains power supply and a direct connection to the interpreted according to
device loop. ranges which can be set and
altered by the user (OK, pre-
alarm, fire)
• Event Log: A history of events
can be stored from the date
the application was started
• Soft addressing: Automatically
assigns a new, and potentially
different, address to every
Product Codes device found on the loop
Code Description
LP800KIT Programmer
107
Ancillaries and Test Equipment
Overview Features
The CF800PROG programmer is a versatile tool to • Reads addresses
aid the installation, commissioning, maintenance • Writes addresses
• Reads analogue values
and servicing of current addressable devices and
• Tests devices
fire alarm systems. • Deletes addresses
• Programmes the 3 heat
This unit is light, robust and easy to operate using a settings
user friendly menu structure on 2 x 40 character LCD
display. It is powered from a single PP3 size, heavy
duty battery or an external supply.
Product Codes
Code Description
CF800PROG Addressable device programmer
108
Notes
109
Notes
110
Global Presence Cooper Industries
Cooper Industries is a diversified global manufacturer
of world-class electrical products, components and
Environmental Policy
tools, with 2009 revenues of $4.5 billion. The
Company has seven operating divisions with On May 1, 1990, Cooper Industries issued a formal policy to affirm its
manufacturing facilities in 23 countries, and employs commitment to the environment. The principles of this policy, reinforce
more than 25,000 people throughout the world. standards of operation already in place and remind employees
throughout the world that environmental considerations have the highest
With its broad range of products and global brands priority at Cooper.
including; Bussmann electrical and electronic fuses;
Crouse-Hinds and CEAG explosion-proof electrical
equipment; Halo, Metalux, Menvier and Crompton
mains and emergency luminaires; Kyle and McGraw-
Edison power systems products; Menvier and JSB
fire systems, Cooper is uniquely positioned for
several long-term growth trends, including the current
The Carbon
global infrastructure developments, improvements to
enhance the reliability and productivity of the electric
grid, the increased demand for energy-efficient
Trust Standard
products and the need for improved electrical safety.
In 2010 the UK facilities of Cooper Industries have been awarded the
Carbon Trust Standard after taking action on climate change by
measuring, managing and reducing its carbon emissions by 17%. The
Carbon Trust Standard recognises organisations for real carbon
reduction. Based on a rigorous, independent assessment, it certifies that
Principles organisations have measured, managed and reduced their carbon
emissions across their own operations, and are committed to reducing
them year on year.
• To observe all environmental laws and regulations
• To respond effectively to environmental concerns
involving Cooper facilities and products
• To minimize and, wherever possible, to eliminate
the generation of all wastes
• To conduct operations in a manner that
demonstrates respect for the environment
• To cooperate with federal, state and local
governments in developing scientifically based
environmental standards
• To encourage the development of environmentally
sound procedures and to conduct business with
the best-available technology
• To maintain environmental monitoring programs
that ensure compliance with governmental
requirements and these principles
• To provide training programs that emphasize the
individual's responsibility for sound environmental
decisions
Conditions of sale
All goods supplied are subject to the company’s general conditions of sale which are available on request.
Trade Descriptions
All descriptions represent only particulars of the goods
to which they apply and do not form part of any contract. The company reserves the right to change specification
without prior notification or public announcement.
The trade names and brand names contained herein are valuable trademarks of Cooper Industries in the U.S. and other countries. You are not permitted to use the
Cooper Trademarks without the prior written consent of Cooper Industries.