Professional Documents
Culture Documents
C
VSS D3 C
1 RB11/D- 1 RA1/AN1 LED
2 PGC 2 LED 2
toPGC to LED 2
GND
VIN VOUT 5V
PB 25 26 25 26
SW_PB_SPST D4 D5 27 28 27 28
C9 LED LED C3 C2 R5
3
F header F header 0u1 0u1 1k
B 0u1 B
VSS
Important:
LED 1 LED 2
0 J8, J9 are single row female headers D2
VSS LED
J8, J9 must be spaced (Alexan) breadboard width from each other
0
Test LEDs D4, D5, and PB SW2 are only for debugging Strict pin placement restrictions:
purposes (i.e. to check if board is working correctly) -- J8 on left side of board contains supply pins and
PORT A pins
D4 - LED of your favorite color -- J9 on right side of board contains PORT B pins, VCAP, VBus
D2, D3 V Rail indicator LEDs
D5 - LED of your second favorite color :)
Pin assignments shown are suggestions, you may adjust
the number of pins dedicated to supply pins, but pin 3V3 rail is Vdd supply
placement restrictions still apply 5V rail will be used for other modules such as LCD
A A
Title
CoE 115 S21617 Bare Board