Professional Documents
Culture Documents
injector (006-026)
Install
with Mechanically Actuated Injector
Do not lubricate the o-rings until the injector is ready for
installation in the cylinder head.
Install four new o-rings on the injector. Do not twist the o-
rings.
-ring (1) is brown and is smaller in diameter than
the other three.
0-ring (2) is black.
-ring (3) is brown and is larger in diameter than (1), but
has a smaller cross section than 0-ring (4).
-ring (4) is brown and is the largest in diameter and cross
section.