Professional Documents
Culture Documents
LTE Drive Test Using GENEX Probe V3.5 Tutorial PDF
LTE Drive Test Using GENEX Probe V3.5 Tutorial PDF
CONTENT
1. Supporting Hardware
Laptop with good condition (free of virus, malware, etc)
Laptop charger
USB GPS NMEA
USB LTE modem Huawei E398S
2. Laptop Spesification
Operating system : Windows XP SP 3
Processor Intel Core i3 and above
RAM 2GB and above
3. Supporting Software
Genex Probe 3.5 version installer
GPS NMEA driver installer
Filezilla 3.6.0.2
DU meter 5.02 driver
HISI UE agent
HI Studio 1.23.0
B. SOFTWARE INSTALLATION
After the USB modem connected, will automatically prepare to install, click NEXT
In “Choose install location”, clicks BROWSE, then choose your location to install.
Input the Profile Name, example : LTE-TDD SITRA, APN setting : STATIC, The
Access Number: *99#. then click SAVE
Then click NEXT, after that on the LICENSE AGREEMENT, choose I ACCEPT
THE TERMS OF THE LICENSE AGREEMENT. Last, click NEXT
Enter the user name and password & company name, the click next. Then on the
SETUP TYPE, choose COMPLETE, then click NEXT
Then, the installation require to install the GENEX Shared, click OK, and choose
MODIFY, Then click NEXT
In SELECT FEATURE, click all of feature, then click NEXT, then GENEX
SHARED installation is finish
Continue for GENEX Probe installation, then after the installation wizard
complete, click YES, I WANT TO RESTART MY COMPUTER NOW, then click
finish
Then click GENEX PROBE V3.5 icon, then give the ESN number to the HUAWEI
Engineer, after get the license, click UPDATE LICENSE
4. HI STUDIO 1.23.0
Installation procedure:
Choose HI STUDIO 1.23.0 driver installer, and then click it.
On Select Additional Tasks, click NEXT, the on Ready to Install, click INSTALL
5. HISI UE AGENT
Installation procedure:
Double Click on the HISI UE AGENT installer, when the GUI showed, click NEXT
Click NEXT, check on the Create a desktop icon, then click NEXT
1. DO NOT CONNECT Dongle and GPS before open the GENEX PROBE V3.5
4. Then click CONFIGURATION > DEVICE MANAGEMENT > DEVICE CONFIGURE >
add GPS
5. Choose COM Port by see the information on Device Manager then click OK
7. Then click to connect the device (LTE MODEM & GPS), see the state:
CONNECTED
8. Import MAP by click , then click ADD, choose the MAP which want to open,
then click OPEN
11. Then match the Probe parameter with the excel parameter
12. Open the FILEZILLA 3.6 for ftp Download test, input the connection blow:
Host : 10.1.12.149
Username : admin
Password : admin
Port : (none)
After input, click QUICKCONNECT, then choose 2 file on the right table:
1G_DL_1_from_149
1G_DL_2_from_149
After choose this 2 files, right click then click DOWNLOAD > ADD FILES TO
QUEQUE (click many times), then check the DU METER for the Download
throughput. Make sure that the throughput is up.
OPEN 3 FILEZILLA at the same time to get the maximum throughput
13. For the UPLOAD test, the procedure almost same, but the differences is: choose file
on the left side (Laptop hard drive) then, choose 2 FILE below:
1G_DL_1_from_149
1G_DL_2_from_149
After choose this 2 files, right click then click UPLOAD > ADD FILES TO QUEQUE
(click many times), then check the DU METER for the UPLOAD throughput. Make
sure that the throughput is up.
OPEN 3 FILEZILLA at the same time to get the maximum throughput
14. Next step, click START RECORD on the Genex Probe, then save the file on in
the free folder
15. To view the RF parameter, click :VIEW (on the toolbar) > LTE > RADIO
PARAMETERS
17. After the drive test finish, click to stop the record
18. For REPLAY the logfile, choose Logfile >open logfile, then select the datafile to be
displayed. Click on the toolbar in tehe main window. During the replay, you can
change the replay speed