Professional Documents
Culture Documents
0
Contents 06 May 2018
Analysis Report
DRUMILIER 02
Prepared by
Arip Suhariyanto
- Page 1 of 28
Summary
This hangging frame structure has design to recieved Ornamen Lamp, the load was design are 300kg
vertical as Dead Load and 100kg horizontal x and y direction as Live Load. the frame it self use UNP 80x45
for all frames.
Table of the load assignment discribe on the Frame Load Table on page 14, the diagram of the load can see
on the image below.
The result of the calculation by the structure analisys software, mention that the hanging frame is able to
support the lamp load. the deflection and the ration of profil is in the range of safe value.
STR-18-1 lampu.sdb 5/13/2018
Z
300.
Y X
Z
Y X 10
0. 0.
10
Contents
1. Model geometry ........................................................................................................................................................ 4
1.1. Joint coordinates............................................................................................................................................ 4
1.2. Joint restraints ............................................................................................................................................... 4
1.3. Element connectivity ...................................................................................................................................... 5
2. Material properties .................................................................................................................................................... 5
3. Section properties ..................................................................................................................................................... 6
3.1. Frames ........................................................................................................................................................... 6
3.2. Areas............................................................................................................................................................ 10
3.3. Solids ........................................................................................................................................................... 11
4. Load patterns .......................................................................................................................................................... 11
4.1. Definitions .................................................................................................................................................... 11
4.2. Auto seismic loading .................................................................................................................................... 11
5. Load cases ............................................................................................................................................................. 12
5.1. Definitions .................................................................................................................................................... 12
5.2. Static case load assignments ...................................................................................................................... 12
5.3. Response spectrum case load assignments ............................................................................................... 13
6. Load combinations .................................................................................................................................................. 13
7. Structure results ...................................................................................................................................................... 15
7.1. Mass summary ............................................................................................................................................ 15
7.2. Modal results ............................................................................................................................................... 16
7.3. Base reactions ............................................................................................................................................. 16
8. Joint results ............................................................................................................................................................. 16
9. Frame results .......................................................................................................................................................... 16
10. Material take-off .................................................................................................................................................... 24
11. Design preferences ............................................................................................................................................... 25
11.1. Steel design ............................................................................................................................................... 25
11.2. Concrete design ......................................................................................................................................... 25
11.3. Aluminum design ....................................................................................................................................... 26
11.4. Cold formed design.................................................................................................................................... 26
12. Design overwrites ................................................................................................................................................. 26
12.1. Steel design ............................................................................................................................................... 26
13. Design summary ................................................................................................................................................... 28
13.1. Steel design ............................................................................................................................................... 28
List of Figures
Figure 1: Finite element model ..................................................................................................................................... 4
Figure 2: Deformed shape .......................................................................................................................................... 15
List of Tables
Table 1: Joint Coordinates ............................................................................................................................................ 4
Table 2: Joint Restraint Assignments ........................................................................................................................... 5
Table 3: Connectivity - Frame....................................................................................................................................... 5
Table 4: Frame Section Assignments ........................................................................................................................... 5
Table 5: Material Properties 02 - Basic Mechanical Properties.................................................................................... 5
Table 6: Material Properties 03a - Steel Data .............................................................................................................. 6
Table 7: Material Properties 03b - Concrete Data ........................................................................................................ 6
Table 8: Material Properties 03e - Rebar Data ............................................................................................................. 6
Table 9: Material Properties 03f - Tendon Data ........................................................................................................... 6
- Page 2 of 28
STR-18-1 lampu.sdb SAP2000 v20.0.0
List of Tables 06 May 2018
- Page 3 of 28
STR-18-1 lampu.sdb SAP2000 v20.0.0
1. Model geometry 06 May 2018
1. Model geometry
This section provides model geometry information, including items such as joint coordinates, joint restraints, and
element connectivity.
- Page 4 of 28
STR-18-1 lampu.sdb SAP2000 v20.0.0
2. Material properties 06 May 2018
2. Material properties
This section provides material property information for materials used in the model.
- Page 5 of 28
STR-18-1 lampu.sdb SAP2000 v20.0.0
3. Section properties 06 May 2018
3. Section properties
This section provides section property information for objects used in the model.
3.1. Frames
- Page 6 of 28
STR-18-1 lampu.sdb SAP2000 v20.0.0
3. Section properties 06 May 2018
- Page 7 of 28
STR-18-1 lampu.sdb SAP2000 v20.0.0
3. Section properties 06 May 2018
- Page 8 of 28
STR-18-1 lampu.sdb SAP2000 v20.0.0
3. Section properties 06 May 2018
BM 15/20 1.
BM 20/30 1.
BM 20/40 1.
BM 25/60 1.
CL 15/40 1.
CL 15/60 1.
CL 50/50 1.
L100/100 1.
L70/70 1.
TB 15/20 1.
TB 20/30 1.
TB 25/40 1.
UNP 100/50 1.
UNP 60/40 1.
UNP 80/45 1.
WF 200x100 1.
WF 250x125 1.
WF 300x150 1.
WF 400x200 1.
WF150x75 1.
WFCB 450x150 1.
- Page 9 of 28
STR-18-1 lampu.sdb SAP2000 v20.0.0
3. Section properties 06 May 2018
3.2. Areas
CW D1 1. 1. 1. 1. 1. 1. 1.
FP 12 1. 1. 1. 1. 1. 1. 1.
RP 15 1. 1. 1. 1. 1. 1. 1.
WP 20 1. 1. 1. 1. 1. 1. 1.
- Page 10 of 28
STR-18-1 lampu.sdb SAP2000 v20.0.0
4. Load patterns 06 May 2018
CW D1 1. 1.
FP 12 1. 1.
RP 15 1. 1.
WP 20 1. 1.
3.3. Solids
4. Load patterns
This section provides loading information as applied to the model.
4.1. Definitions
LL Live 0.
QL Quake 0. CHINESE2010
DL Dead 1.
- Page 11 of 28
STR-18-1 lampu.sdb SAP2000 v20.0.0
5. Load cases 06 May 2018
5. Load cases
This section provides load case information.
5.1. Definitions
MODAL Other
LL Short-Term
Composite
QL Short-Term
Composite
DL Non-Compos
ite
- Page 12 of 28
STR-18-1 lampu.sdb SAP2000 v20.0.0
6. Load combinations 06 May 2018
LL Load pattern LL 1.
QL Load pattern QL 1.
DL Load pattern DL 1.
6. Load combinations
This section provides load combination information.
- Page 13 of 28
STR-18-1 lampu.sdb SAP2000 v20.0.0
6. Load combinations 06 May 2018
- Page 14 of 28
STR-18-1 lampu.sdb SAP2000 v20.0.0
7. Structure results 06 May 2018
7. Structure results
This section provides structure results, including items such as structural periods and base reactions.
- Page 15 of 28
STR-18-1 lampu.sdb SAP2000 v20.0.0
8. Joint results 06 May 2018
8. Joint results
This section provides joint results, including items such as displacements and reactions.
9. Frame results
This section provides frame force results.
- Page 16 of 28
STR-18-1 lampu.sdb SAP2000 v20.0.0
9. Frame results 06 May 2018
- Page 17 of 28
STR-18-1 lampu.sdb SAP2000 v20.0.0
9. Frame results 06 May 2018
- Page 18 of 28
STR-18-1 lampu.sdb SAP2000 v20.0.0
9. Frame results 06 May 2018
- Page 19 of 28
STR-18-1 lampu.sdb SAP2000 v20.0.0
9. Frame results 06 May 2018
- Page 20 of 28
STR-18-1 lampu.sdb SAP2000 v20.0.0
9. Frame results 06 May 2018
- Page 21 of 28
STR-18-1 lampu.sdb SAP2000 v20.0.0
9. Frame results 06 May 2018
- Page 22 of 28
STR-18-1 lampu.sdb SAP2000 v20.0.0
9. Frame results 06 May 2018
- Page 23 of 28
STR-18-1 lampu.sdb SAP2000 v20.0.0
10. Material take-off 06 May 2018
- Page 24 of 28
STR-18-1 lampu.sdb SAP2000 v20.0.0
11. Design preferences 06 May 2018
- Page 25 of 28
STR-18-1 lampu.sdb SAP2000 v20.0.0
12. Design overwrites 06 May 2018
- Page 26 of 28
STR-18-1 lampu.sdb SAP2000 v20.0.0
12. Design overwrites 06 May 2018
4 0.
8 0.
10 0.
12 0.
13 0.
- Page 27 of 28
STR-18-1 lampu.sdb SAP2000 v20.0.0
13. Design summary 06 May 2018
- Page 28 of 28