Professional Documents
Culture Documents
03 octubre 2020
NAVE PASA1.sdb SAP2000 v20.1.0 - License #3010*1VF4MQCXDDPTCD5
Contents 03 Octubre 2020
Contents
1. Model geometry ...................................................................................................................................................... 4
1.1. Joint coordinates ......................................................................................................................................... 7
1.2. Joint restraints ........................................................................................................................................... 26
1.3. Element connectivity .................................................................................................................................. 26
2. Material properties ................................................................................................................................................ 74
3. Section properties................................................................................................................................................. 75
3.1. Frames ...................................................................................................................................................... 75
3.2. Areas ......................................................................................................................................................... 76
3.3. Solids ......................................................................................................................................................... 77
4. Load patterns ....................................................................................................................................................... 77
4.1. Definitions .................................................................................................................................................. 77
4.2. Auto seismic loading .................................................................................................................................. 78
5. Load cases ........................................................................................................................................................... 78
5.1. Definitions .................................................................................................................................................. 78
5.2. Static case load assignments .................................................................................................................... 79
5.3. Response spectrum case load assignments ............................................................................................. 79
6. Load combinations ............................................................................................................................................... 80
7. Structure results ................................................................................................................................................... 82
7.1. Mass summary .......................................................................................................................................... 82
7.2. Modal results ............................................................................................................................................ 121
7.3. Base reactions .......................................................................................................................................... 121
8. Joint results ......................................................................................................................................................... 122
9. Frame results....................................................................................................................................................... 272
10. Material take-off ............................................................................................................................................... 2011
11. Design preferences ......................................................................................................................................... 2011
11.1. Steel design .......................................................................................................................................... 2011
11.2. Concrete design ................................................................................................................................... 2012
11.3. Aluminum design .................................................................................................................................. 2012
11.4. Cold formed design............................................................................................................................... 2012
12. Design overwrites ............................................................................................................................................ 2012
12.1. Steel design .......................................................................................................................................... 2013
12.2. Cold formed design............................................................................................................................... 2307
13. Design summary.............................................................................................................................................. 2338
13.1. Steel design .......................................................................................................................................... 2338
List of Figures
Figure 1: Finite element model ................................................................................................................................... 4
Figure 2: Deformed shape ........................................................................................................................................ 82
List of Tables
Table 1: Joint Coordinates.......................................................................................................................................... 7
Table 2: Joint Restraint Assignments ....................................................................................................................... 26
Table 3: Connectivity - Frame .................................................................................................................................. 27
Table 4: Frame Section Assignments ....................................................................................................................... 49
Table 5: Frame Release Assignments 1 - General, Part 1 of 2 ................................................................................ 72
Table 5: Frame Release Assignments 1 - General, Part 2 of 2 ................................................................................ 73
Table 6: Material Properties 02 - Basic Mechanical Properties ................................................................................ 74
Table 7: Material Properties 03a - Steel Data........................................................................................................... 74
1. Model geometry
This section provides model geometry information, including items such as joint coordinates, joint restraints, and
element connectivity.
2. Material properties
This section provides material property information for materials used in the model.
3. Section properties
This section provides section property information for objects used in the model.
3.1. Frames
12MT14 1. 1. 1. 1. 1. 1. 1. 1.
2L 64x64x6 1. 1. 1. 1. 1. 1. 1. 1.
2L 76x76x5 1. 1. 1. 1. 1. 1. 1. 1.
2L 76x76x6 1. 1. 1. 1. 1. 1. 1. 1.
HSS 10 x10 x 1. 1. 1. 1. 1. 1. 1. 1.
3/8
IR 16x38.7 1. 1. 1. 1. 1. 1. 1. 1.
Red 1/2" 1. 1. 1. 1. 1. 1. 1. 1.
Red 25 1. 1. 1. 1. 1. 1. 1. 1.
Red 5/8" 1. 1. 1. 1. 1. 1. 1. 1.
W18X35 1. 1. 1. 1. 1. 1. 1. 1.
3.2. Areas
ASEC1 1. 1. 1. 1. 1. 1. 1.
ASEC1 1. 1.
3.3. Solids
4. Load patterns
This section provides loading information as applied to the model.
4.1. Definitions
DEAD Dead 1.
Adicional Carga Dead 0.
Muerta
Carga Viva Live 0.
Carga de Viento Wind 0. None
Sx Quake 0. USER COEFF
Sy Quake 0. USER COEFF
carga nieve Snow 0.
5. Load cases
This section provides load case information.
5.1. Definitions
DEAD Non-
Composite
MODAL Other
Accidental Carga Non-
Muerta Composite
Carga Viva Short-Term
Composite
Carga de Viento Short-Term
Composite
Sx Short-Term
Composite
Sy Short-Term
Composite
carga nieve Short-Term
Composite
Sx 0.05
Sy 0.05
6. Load combinations
This section provides load combination information.
7. Structure results
This section provides structure results, including items such as structural periods and base reactions.
8. Joint results
This section provides joint results, including items such as displacements and reactions.
9. Frame results
This section provides frame force results.