Professional Documents
Culture Documents
can choose the SMI Factory Driver for SMI device production.
1.2 After you install succeed, it may show the 「 Install OK 」 message as
bottom.
1.3 It will install「SMI Factory Driver」 when you plug-in the SMI Device
until you change to「Mass Storage Driver」. The alert is presented in the
bottom:
2 Step by step of driver installation when detected SMI device.
2.3 If you have several devices, you have to press each dialog for SMI
Factory Driver installation. But if you want to avoid these messages for
installing, you just open the「SMI Mass Production Tool」. It will help you
3.1 After you plugged all SMI Devices, you had to run「Config Hub」to setup
the mapping between port and USB device. It presented in the bottom.
3.2 In current, you can press the「Scan USB」to search the mapping port is
Device with 『 Factory Driver and HUB 』 option after you pressed the
『Scan USB』button.
3.4 If you want to leave the production for SMI Devices, you must change the