Professional Documents
Culture Documents
Specifications
Range 0.5cm – 5 cm
Weight 20 Grms
Features
Resolution : 0.3 cm
Specifications
Operating Voltage: 5V – 20V
Power Consumption: 65mA
TTL output: 3.3V, 0V
Delay time: Adjustable (.3->5min)
Lock time: 0.2 sec
Trigger methods: L – disable repeat trigger, H enable repeat trigger
Sensing range: less than 120 degree, within 7 meters
Operating Temperature: – 15 ~ +70
LDR SENSOR:
Electrical Characteristics
Specification
Item Parameter Min Typical Max Unit
VCC Working Voltage 4.9 5 5.1 V
PH Heating consumption 0.5 - 750 mW
RL Load resistance adjustable
RH Heater resistance - 33 - Ω
Rs Sensing Resistance 1 - 8 MΩ
Scope Detecting Concentration 0.05 - 10 mg/L
SMOKE SENSOR
SPECIFICATIONS:
LM35:
Calibrated Directly in Celsius (Centigrade)
Linear + 10-mV/°C Scale Factor
0.5°C Ensured Accuracy (at 25°C)
Rated for Full −55°C to 150°C Range
Suitable for Remote Applications
Low-Cost Due to Wafer-Level Trimming
Operates From 4 V to 30 V
Less Than 60-µA Current Drain
Low Self-Heating, 0.08°C in Still Air
Non-Linearity Only ±¼°C Typical
Low-Impedance Output, 0.1 Ω for 1-mA Load
THERMISTOR:
Features
Come with broad resistance range
Thermistor cost is economical
Provided with lacquer-coated thermistor disk
Copper leads have coating of tin.
Having lead spacing of 5.0 mm
Component remarked with resistance and tolerance
Good stability, durability in environment
Provide high accuracy in resistance and B-constant
Product is not containing lead
Technical Specifications
Resistance at 25 degrees C: 10K +- 1%
B-value (material constant) = 3950+- 1%
Dissipation factor (loss-rate of energy of a mode of oscillation) δ th = (in
air)approx.7.5mW/K
Thermal cooling time constant <= (in air) 20 seconds
Thermistor temperature range -55 °C to 125 °C